A scaled fundamental equation for the thermodynamic properties of carbon dioxide in the critical region

A scaled fundamental equation is presented for the thermodynamic properties of carbon dioxide in the critical region. The equation is constructed by combining earlier experimental pressure data of Michels and co‐workers with new specific heat data obtained by one of the authors and represents the thermodynamic properties of carbon dioxide in the critical region at temperatures from 301.15 to 323 K and at densities from 290 to 595 kg/m3

Evaluation of African-bred maize germplasm lines for resistance to aflatoxin accumulation

Aflatoxins, produced by the fungus Aspergillus flavus, contaminate maize grain and threaten human food and feed safety. Plant resistance is considered the best strategy for reducing aflatoxin accumulation. Six maize germplasm lines, TZAR101–TZAR106, were released by the International Institute of Tropical Agriculture-Southern Regional Research Center (IITA-SRRC) maize breeding collaboration for use in African National Programs and U.S. maize breeding programs. The present investigation was conducted to evaluate aflatoxin reduction by these lines in a U.S. environment. As germplasm lines, resistance was demonstrated by the lines tested in 2010 and 2014 trials. In 2010, TZAR106 was among the lines with the lowest toxin accumulation, and in 2014, along with TZAR102, supported low aflatoxin. When evaluated as single cross hybrids in 2012, 2013 and 2014, several crosses involving IITA-SRRC lines accumulated low toxin. In 2012, TZAR103 × HBA1 was one of 4 lines with the lowest concentration of aflatoxin. In 2014, five IITA-SRRC hybrids were among the lowest with TZAR102 × Va35 and TZAR102 × LH132 being the two lowest. Results demonstrate significant aflatoxin reduction by IITA-SRRC lines in a U.S. aflatoxin-conducive environment (at Mississippi State University). Further testing in different locations and environments is needed to further evaluate the potential usefulness of these germplasm lines

An Analytical Modeling Method for Calculating the Current Delivery Capacity of a Thin-Film Cathode and the Stability of Localized Corrosion Under Atmospheric Environemnts

Corrosion resistant materials under atmospheric conditions can suffer from localized corrosion (e.g., pitting, crevice, stress-corrosion cracking). The stability of such a localized corrosion site requires that the site (anode) must dissolve at a sufficiently high rate to maintain the critical chemistry and that it be coupled to a wetted surrounding area (cathode) that can provide a matching cathodic current. The objectives of this study were to computationally characterize the stability of such a local corrosion system and to explore the effects of physiochemical and electrochemical parameters. The overall goal of the work is to contribute to the establishment of a scientific basis for the prediction of the stabilization of localized attack. An analytical method is presented for evaluating the stability of localized corrosion of corrosion-resistant alloys under thin-layer (or atmospheric) conditions. The method requires input data that are either thermodynamic in nature or easily obtained experimentally. The maximum cathode current available depends on the cathode geometry, temperature, relative humidity, deposition density of salt (i.e., mass of salt per unit area of cathode), and interfacial electrochemical kinetics. The anode demand depends on the crevice geometry, the position of attack within the crevice, and the localized corrosion stability product. The localized corrosion stability product, i*x, is the product of the current density at the localized corrosion site and the depth of that localized corrosion site. By coupling these two approaches for analysis of the current capacity of the cathode and the current demand of the anode, the stability of a crevice can be determined for a given environmental scenario. The method has been applied to the atmospheric localized corrosion of Type 31GL stainless steel as well as Alloy C-22. The effects of the key parameters are described and compared

Spin-charge separation in the single hole doped Mott antiferromagnet

The motion of a single hole in a Mott antiferromagnet is investigated based on the t-J model. An exact expression of the energy spectrum is obtained, in which the irreparable phase string effect [Phys. Rev. Lett. 77, 5102 (1996)] is explicitly present. By identifying the phase string effect with spin backflow, we point out that spin-charge separation must exist in such a system: the doped hole has to decay into a neutral spinon and a spinless holon, together with the phase string. We show that while the spinon remains coherent, the holon motion is deterred by the phase string, resulting in its localization in space. We calculate the electron spectral function which explains the line shape of the spectral function as well as the ``quasiparticle'' spectrum observed in angle-resolved photoemission experiments. Other analytic and numerical approaches are discussed based on the present framework.Comment: 16 pages, 9 figures; references updated; to appear in Phys. Rev.

Surface tension of the isotropic-nematic interface

We present the first calculations of the pressure tensor profile in the vicinity of the planar interface between isotropic liquid and nematic liquid crystal, using Onsager's density functional theory and computer simulation. When the liquid crystal director is aligned parallel to the interface, the situation of lowest free energy, there is a large tension on the nematic side of the interface and a small compressive region on the isotropic side. By contrast, for perpendicular alignment, the tension is on the isotropic side. There is excellent agreement between theory and simulation both in the forms of the pressure tensor profiles, and the values of the surface tension.Comment: Minor changes; to appear in Phys. Rev.

SU(2)-in-SU(1,1) Nested Interferometer for Highly Sensitive, Loss-Tolerant Quantum Metrology

We present experimental and theoretical results on a new interferometer topology that nests a SU(2) interferometer, e.g., a Mach-Zehnder or Michelson interferometer, inside a SU(1,1) interferometer, i.e., a Mach-Zehnder interferometer with parametric amplifiers in place of beam splitters. This SU(2)-in-SU(1,1) nested interferometer (SISNI) simultaneously achieves high signal-to-noise ratio (SNR), sensitivity beyond the standard quantum limit (SQL) and tolerance to photon losses external to the interferometer, e.g., in detectors. We implement a SISNI using parametric amplification by four-wave mixing (FWM) in Rb vapor and a laser-fed Mach-Zehnder SU(2) interferometer. We observe path-length sensitivity with SNR 2.2 dB beyond the SQL at power levels (and thus SNR) 2 orders of magnitude beyond those of previous loss-tolerant interferometers. We find experimentally the optimal FWM gains and find agreement with a minimal quantum noise model for the FWM process. The results suggest ways to boost the in-practice sensitivity of high-power interferometers, e.g., gravitational wave interferometers, and may enable high-sensitivity, quantum-enhanced interferometry at wavelengths for which efficient detectors are not available.Comment: 6 pages + 4 of supplemental material, 5 figure

Enhanced critical current density of YBa2Cu3Ox films grown on Nd1/3Eu1/3Gd1/3Ba2Cu3Ox with nano-undulated surface morphology

We report a simple and easily controllable method where a nano-undulated surface morphology of Nd1/3Eu1/3Gd1/3Ba2Cu3Ox (NEG) films leads to a substantial increase in the critical current density in superconducting YBa2Cu3Ox (YBCO) films deposited by pulsed laser deposition on such NEG layers. The enhancement is observed over a wide range of fields and temperatures. Transmission electron microscopy shows that such YBCO films possess a high density of localized areas, typically 20 x 20 nm2 in size, where distortion of atomic planes give rotational (2 to 5 degrees) moire patterns. Their distribution is random and uniform, and expected to be the origin of the enhanced flux pinning. Magneto-optical imaging shows that these films have excellent macroscopic magnetic uniformity.Comment: 4 pages, 4 figure

Finite Element Analysis of the Displacement Adjustment Scheme for Column Bases of a 10000 m3 Spherical Tank During Whole-body Heat Treatment

AbstractThe stress of spherical tank and displacement of column bases were calculated by finite element method, considering the uneven gravity loads on support columns which was caused by manufacturing and setting errors. The preliminary displacement adjustment scheme for column bases was made, according to the safety range of column bases displacement which was determined by the maximum stress restricted by allowable stress at the set heat treatment temperatures. The final scheme was made after checking the preliminary scheme. The method of making adjustment scheme of column bases for a 10000m3 spherical tank during the whole-body heat treatment may provide a reference for other large spherical tank

Analysis and design of power management scheme for an on-board solar energy storage system

This paper investigates the power management issues in a mobile solar energy storage system. A multi-converter based energy storage system is proposed, in which solar power is the primary source while the grid or the diesel generator is selected as the secondary source. The existence of the secondary source facilitates the battery state of charge detection by providing a constant battery charging current. Converter modeling, multi-converter control system design, digital implementation and experimental verification are introduced and discussed in details. The prototype experiment indicates that the converter system can provide a constant charging current during solar converter maximum power tracking operation, especially during large solar power output variation, which proves the feasibility of the proposed design

γ-Glutamyl carboxylase mutations differentially affect the biological function of vitamin K–dependent proteins

γ-Glutamyl carboxylase (GGCX) is an integral membrane protein that catalyzes posttranslational carboxylation of a number of vitamin K–dependent (VKD) proteins involved in a wide variety of physiologic processes, including blood coagulation, vascular calcification, and bone metabolism. Naturally occurring GGCX mutations are associated with multiple distinct clinical phenotypes. However, the genotype–phenotype correlation of GGCX remains elusive. Here, we systematically examined the effect of all naturally occurring GGCX mutations on the carboxylation of 3 structure–function distinct VKD proteins in a cellular environment. GGCX mutations were transiently introduced into GGCX-deficient human embryonic kidney 293 cells stably expressing chimeric coagulation factor, matrix Gla protein (MGP), or osteocalcin as VKD reporter proteins, and then the carboxylation efficiency of these reporter proteins was evaluated. Our results show that GGCX mutations differentially affect the carboxylation of these reporter proteins and the efficiency of using vitamin K as a cofactor. Carboxylation of these reporter proteins by a C-terminal truncation mutation (R704X) implies that GGCX’s C terminus plays a critical role in the binding of osteocalcin but not in the binding of coagulation factors and MGP. This has been confirmed by probing the protein–protein interaction between GGCX and its protein substrates in live cells using bimolecular fluorescence complementation and chemical cross-linking assays. Additionally, using a minigene splicing assay, we demonstrated that several GGCX missense mutations affect GGCX’s pre–messenger RNA splicing rather than altering the corresponding amino acid residues. Results from this study interpreted the correlation of GGCX’s genotype and its clinical phenotypes and clarified why vitamin K administration rectified bleeding disorders but not nonbleeding disorders