Local Heat Transfer Measurements on a Rotating Flat Blade Model with a Single Film Hole

An experimental study was performed to measure the heat transfer coefficient distributions on a flat blade model under rotating operating conditions. A steady-state thermochromic liquid crystal technique was employed to measure the surface temperature, and all the signals from the rotating reference frame were collected by the telemetering instrument via a wireless connection. Both air and CO2 were used as coolant. Results show that the rotational effect has a significant influence on the heat transfer coefficient distributions. The profiles of hg/h0, which is the ratio of heat transfer coefficient with film cooling to that without film cooling, deflect towards the high-radius locations on both the pressure surface and suction surface as the rotation number (Rt) increases, and the deflective tendency is more evident on the suction surface. The variations in mainstream Reynolds number (ReD) and blowing ratio (M) present different distributions of hg/h0 on the pressure and suction surfaces, respectively. Furthermore, the coolant used for CO2 injection is prone to result in lower heat transfer coefficients.Peer reviewe

Thermalization of gluon matter including gg<->ggg interactions

Within a pQCD inspired kinetic parton cascade we simulate the space time evolution of gluons which are produced initially in a heavy ion collision at RHIC energy. The inelastic gluonic interactions $gg \leftrightarrow ggg$ do play an important role: For various initial conditions it is found that thermalization and the close to ideal fluid dynamical behaviour sets in at very early times. Special emphasis is put on color glass condensate initial conditions and the `bottom up thermalization' scenario. Off-equilibrium $3\to 2$ processes make up the very beginning of the evolution leading to an initial decrease in gluon number and a temporary avalanche of the gluon momentum distribution to higher transversal momenta.Comment: 6 pages, 8 figures, Talk given at International Conference on Strong and Electroweak Matter (SEWM 2006), BNL, New York, May 200

Dimerization-assisted energy transport in light-harvesting complexes

We study the role of the dimer structure of light-harvesting complex II (LH2) in excitation transfer from the LH2 (without a reaction center (RC)) to the LH1 (surrounding the RC), or from the LH2 to another LH2. The excited and un-excited states of a bacteriochlorophyll (BChl) are modeled by a quasi-spin. In the framework of quantum open system theory, we represent the excitation transfer as the total leakage of the LH2 system and then calculate the transfer efficiency and average transfer time. For different initial states with various quantum superposition properties, we study how the dimerization of the B850 BChl ring can enhance the transfer efficiency and shorten the average transfer time.Comment: 11 pages, 6 figure

Review of the "Bottom-Up" scenario

Thermalization of a longitudinally expanding color glass condensate with Bjorken boost invariant geometry is investigated within parton cascade BAMPS. Our main focus lies on the detailed comparison of thermalization, observed in BAMPS with that suggested in the Bottom-Up scenario. We demonstrate that the tremendous production of soft gluons via $gg \to ggg$, which is shown in the Bottom-Up picture as the dominant process during the early preequilibration, will not occur in heavy ion collisions at RHIC and LHC energies, because the back reaction $ggg\to gg$ hinders the absolute particle multiplication. Moreover, contrary to the Bottom-Up scenario, soft and hard gluons thermalize at the same time. The time scale of thermal equilibration in BAMPS calculations is of order \as^{-2} (\ln \as)^{-2} Q_s^{-1}. After this time the gluon system exhibits nearly hydrodynamic behavior. The shear viscosity to entropy density ratio has a weak dependence on $Q_s$ and lies close to the lower bound of the AdS/CFT conjecture.Comment: Quark Matter 2008 Proceeding