Re-examination of Peptide-Sequence-Dependent Gene Expression of Cysteine-Installed Pegylated Oligolysine/DNA Complexes

We previously synthesized cysteine-installed C-terminally PEGylated oligolysines with 20 amino acid residues to form cross-linked polymeric micelles (PMs) with luciferase-coding plasmid DNA as a candidate for artificial gene vectors. Luciferase gene expression in HeLa cells mediated by PEG–CK18C, PEG–CK9CK9, and PEG–K9CK9C was reported to be 35-, 5.4-, and 1.3-fold higher than that mediated by cysteine-uninstalled PEGylated oligolysine PEG–K20, respectively. However, after the publication, the survival rate of HeLa cells used in the previous study was found to be lower than usual when subcutaneously implanted into mice to create a xenograft model. In this study, to re-examine the peptide sequence-dependent gene expression, gene expression efficacy mediated by PEG–peptide PMs was compared with the PM cellular uptake results using newly obtained HeLa cell lines and the additional cell lines Huh-7, PANC-1, and BxPC3. As a result, PEG–K9CK9C PMs mediated the maximum gene expression in all cell lines, and the corresponding cellular uptake was also obtained. Therefore, we concluded that our previous results were erroneously obtained due to normality-depleted HeLa cells. A comparison of physicochemical characterizations, gene expression efficacy, and cellular uptake of PEG–peptide PMs is discussed in detail

Preparation and Characterization of Polyion Complex Micelles with a Novel Thermosensitive Poly(2-isopropyl-2-oxazoline) Shell via the Complexation of Oppositely Charged Block Ionomers^†

Novel thermosensitive polyion complex (PIC) micelles were prepared in an aqueous medium based on the complexation of a pair of oppositely charged block ionomers, poly(2-isopropyl-2-oxazoline)-b-poly(amino acid)s (PiPrOx-b-PAA), containing thermosensitive PiPrOx segments. The controlled synthesis of PiPrOx-b-PAA was achieved via the ring-opening anionic polymerization of N-carboxyanhydrides (NCA) of either ε-benzyloxycarbonyl-l-lysine (Lys(Z)-NCA) or β-benzyl-l-aspartate (BLA-NCA) with ω-amino-functionalized PiPrOx macroinitiators and the subsequent deprotection reaction under acidic or basic conditions. Gel permeation chromatography (GPC) and 1H NMR spectroscopy revealed that the syntheses of two block ionomers, poly(2-isopropyl-2-oxazoline)-b-poly(l-lysine) [PiPrOx-P(Lys)] and poly(2-isopropyl-2-oxazoline)-b-poly(aspartic acid) [PiPrOx-P(Asp)], proceeded almost quantitatively to give samples with a narrow molecular weight distribution (Mw/Mn ≤ 1.2). The mixing of these two oppositely charged block ionomers in an aqueous medium led to the spontaneous formation of PIC micelles, which was confirmed by dynamic light scattering (DLS) and transmission electron microscopy (TEM). The PIC micelles were spherical particles with a narrow distribution in the range of the measured concentration (0.125−1 mg/mL) and were stable without any secondary aggregates. Furthermore, the PIC micelles had a constant cloud-point temperature (Tcp) of ∼32 °C under physiological conditions regardless of the total concentration, suggesting that the concentration factor is almost negligible with respect to the Tcp of the micelles presumably because of the increased local concentration of the PiPrOx segments in the shell layer. These PIC micelles have a promising application as a size-regulated smart nanocontainer loading charged compounds as well as bearing a thermosensitive outer shell that is useful for physical affinity control

Stabilization of Lysozyme-Incorporated Polyion Complex Micelles by the ω-End Derivatization of Poly(ethylene glycol)−Poly(α,β-aspartic acid) Block Copolymers with Hydrophobic Groups

To improve the stability of lysozyme-incorporated polyion complex (PIC) micelles in physiological condition, three types of hydrophobic groups, including phenyl (Phe), naphthyl (Nap), and pyrenyl (Py) terminal groups, were separately introduced to the ω-end of poly(ethylene glycol)−poly(α,β-aspartic acid) block copolymers (PEG−P(Asp)). The goal was to enhance association forces between the enzyme, lysozyme, and PEG-P(Asp) carriers. Introduction of these hydrophobic groups significantly decreases micellar critical association concentration and increases the micellar tolerability against increasing NaCl concentrations. Particularly, PIC micelles formed from PEG−P(Asp) with Py groups was most stable against increasing NaCl concentrations up to 0.1 M. Significant deviation from a spherical shape for the micelles was also observed for the PEG−P(Asp)−Py system, consistent with an increased association number

Living Unimodal Growth of Polyion Complex Vesicles via Two-Dimensional Supramolecular Polymerization

Understanding the dynamic behavior of molecular self-assemblies with higher-dimensional structures remains a key challenge to obtaining well-controlled and monodispersed structures. Nonetheless, there exist few systems capable of realizing the mechanism of supramolecular polymerization at higher dimensions. Herein, we report the unique self-assembling behavior of polyion complexes (PICs) consisting of poly­(ethylene glycol)-polyelectrolyte block copolymer as an example of two-dimensional supramolecular living polymerization. Monodispersed and submicrometer unilamellar PIC vesicles (nano-PICsomes) displayed time-dependent growth while maintaining a narrow size distribution and a unilamellar structure. Detailed analysis of the system revealed that vesicle growth proceeded through the consumption of unit PICs (uPICs) composed of a single polycation/polyanion pair and was able to restart upon the further addition of isolated uPICs. Interestingly, the resulting vesicles underwent dissociation into uPICs in response to mechanical stress. These results clearly frame the growth as a two-dimensional supramolecular living polymerization of uPICs

Colloidal Au Replacement Assay for Highly Sensitive Quantification of Low Molecular Weight Analytes by Surface Plasmon Resonance

A novel sensing method based on surface plasmon resonance (SPR) was developed for the highly sensitive quantification of low molecular weight (LMW) analytes (colloidal Au replacement assay). Gold nanoparticles (diameter = 20 nm) functionalized with lactosyl-poly(ethylene glycol) (PEG) were prepared and were specifically adsorbed onto a Ricinus communis agglutinin (RCA120)-immobilized SPR sensor chip surface. Subsequent injection of free d-galactose elicited the elution of the preadsorbed lactosyl-PEGylated gold nanoparticles in a manner proportional to the galactose concentration, achieving a substantial and quantitative analysis over a wide range of galactose concentrations (0.1−50 ppm). This method of d-galactose sensing through the substituted elution of preadsorbed nanoparticles from the sensor chip surface would be applicable for the highly sensitive SPR quantification of various LMW analytes, which are known to be difficult to detect by the conventional SPR sensing regime

Colloidal Au Replacement Assay for Highly Sensitive Quantification of Low Molecular Weight Analytes by Surface Plasmon Resonance

A novel sensing method based on surface plasmon resonance (SPR) was developed for the highly sensitive quantification of low molecular weight (LMW) analytes (colloidal Au replacement assay). Gold nanoparticles (diameter = 20 nm) functionalized with lactosyl-poly(ethylene glycol) (PEG) were prepared and were specifically adsorbed onto a Ricinus communis agglutinin (RCA120)-immobilized SPR sensor chip surface. Subsequent injection of free d-galactose elicited the elution of the preadsorbed lactosyl-PEGylated gold nanoparticles in a manner proportional to the galactose concentration, achieving a substantial and quantitative analysis over a wide range of galactose concentrations (0.1−50 ppm). This method of d-galactose sensing through the substituted elution of preadsorbed nanoparticles from the sensor chip surface would be applicable for the highly sensitive SPR quantification of various LMW analytes, which are known to be difficult to detect by the conventional SPR sensing regime

Spontaneous Formation of Nanosized Unilamellar Polyion Complex Vesicles with Tunable Size and Properties

Fabrication of monodispersed, submicrometer-sized vesicles (nanosomes) that form through self-assembly possessing a thin and permeable membrane remains a significant challenge. Conventional fabrication of nanosomes through self-assembly of amphiphilic molecules often requires cumbersome processes using organic solvents combined with physical procedures (e.g., sonication, thermal treatment, and membrane filtration) to obtain unilamellar structures with a controlled size distribution. Herein, we report the first example of spontaneously formed submicrometer-sized unilamellar polyion complex vesicles (Nano-PICsomes) via self-assembly of a pair of oppositely charged PEG block aniomer and homocatiomer in an aqueous medium. Detailed dynamic light scattering and transmission electron microscopic analysis revealed that vesicle sizes can be controlled in the range of 100−400 nm with a narrow size distribution, simply by changing the total polymer concentration. Also, each Nano-PICsome was composed of a uniform single PIC membrane, the thickness of which is around 10−15 nm, regardless of its size. Fluorescence correlation spectroscopy measurement verified that Nano-PICsomes were able to encapsulate water-soluble fluorescent macromolecules in the inner water phase and release them slowly into the exterior. Moreover, cross-linking of the vesicle membrane allows tuning of permeability, enhancement in stability under physiological conditions, and preservation of size and structure even after freeze-drying and centrifugation treatment. Finally, Nano-PICsomes showed a long circulation time in the bloodstream of mice. Precise control of the particle size and structure of hollow capsules through simple aqueous self-assembly and easy modification of their properties by cross-linking is quite novel and fascinating in terms of ecological, low-cost, and low-energy fabrication processes as well as the potential utility in the biomedical arena

Soft X-ray Vortex Beam detected by In-line Holography

We demonstrate the in-line holography for soft x-ray vortex beam having an orbital angular momentum. A hologram is recorded as an interference between a Bragg diffraction wave from a fork grating and a divergence wave generated by a Fresnel zone plate. The obtained images exhibit fork-shaped interference fringes, which confirms the formation of the vortex beam. By analyzing the interference image, we successfully obtained the spiral phase distribution. The results demonstrate that the in-line holography technique is promising for the characterization of topological magnets, such as magnetic skyrmions

PEGylated Polyplex Micelles from Triblock Catiomers with Spatially Ordered Layering of Condensed pDNA and Buffering Units for Enhanced Intracellular Gene Delivery

An A−B−C type triblock copolymer, tandemly aligning two types of polycations with different pKa values in a single polymer strand, was developed for the construction of novel polyplex micelles, satisfying a high DNA condensing ability as well as a proton buffering activity directed to elevating gene transfection. The micelle might feature the distinctive three-layered structure, where an inner polyplex layer of condensed pDNA with poly(l-lysine) (pKa ∼9.4) as the C segment is successively wrapped with an intermediate layer of poly[(3-morpholinopropyl)aspartamide] (B segment) with a comparatively low pKa of ∼6.2, to provide a buffering effect, and an outer PEG layer (A segment) as a biocompatible palisade