Unique Monotropic Phase Transition Behaviors of a Butterfly-Shaped Diphenylpyrimidine Molecule

The physical properties of two-dimensional disc-shaped aromatic carbon molecules strongly depend on the molecular packing structures. A butterfly-shaped diphenylpyrimidine molecule (DPP-6C12) was synthesized by covalently attaching two tridodecyl benzoate tails (6C12) at the both sides of the diphenylpyrimidine (DPP) moiety. Unique phase transition behaviors of DPP-6C12 and their origins were investigated with the combined techniques of thermal, scattering, spectroscopic, and microscopic analyses. On the basis of the experimental results and analyses, it was realized that a butterfly-shaped DPP-6C12 formed three ordered phases: a plastic crystal phase (PK), a crystal phase (K), and a liquid crystal phase (Φ). By breaking the molecular symmetry and coplanarity of DPP-6C12, peculiar monotropic phase transition behaviors were observed. The stable Φ mesophase was formed either by a slow heating above the metastable PK phase or by an isothermal annealing between <i>T</i>_Φ and <i>T</i>_K. The stable K phase was only formed by a slow heating from the preordered Φ mesophase, and the formation of the K phase directly from the isotropic state (I) was forbidden because the nucleation barrier from I to K was too high to be overcome via thermal annealing

Photopolymerization of Reactive Amphiphiles: Automatic and Robust Vertical Alignment Layers of Liquid Crystals with a Strong Surface Anchoring Energy

A photopolymerizable itaconic acid-based amphiphile (abbreviated as Ita3C₁₂) consisting of a hydrophilic carboxylic acid, three alkyl tails, and a reactive vinyl function was newly designed and synthesized for the formation of automatic and robust vertical alignment (VA) layer of nematic liquid crystals (NLC). Since a hydrophilic carboxylic acid was chemically attached to the end of Ita3C₁₂, the Ita3C₁₂ amphiphiles initially dissolved in the host NLC medium were migrated toward the substrates for the construction of VA layer of NLC. The alkyl tails of Ita3C₁₂ in the VA layer directly interacted with host NLC molecules and made them to automatically align vertically. Because of the reactive vinyl functions of Ita3C₁₂ amphiphiles, it was possible to stabilize the automatic VA layer by the photopolymerization with methacryl polyhedral oligomeric silsesquioxane (MAPOSS) cross-linkers. The polymer-stabilized robust Ita3C₁₂ VA layer exhibited a strong surface anchoring energy without generating any light scatterings. The automatic fabrication of robust LC alignment layers can allow us to reduce the manufacturing cost and to open new doors for electro-optical applications

Photoresponsive Carbohydrate-based Giant Surfactants: Automatic Vertical Alignment of Nematic Liquid Crystal for the Remote-Controllable Optical Device

Photoresponsive carbohydrate-based giant surfactants (abbreviated as CELA<i>_n</i>D-OH) were specifically designed and synthesized for the automatic vertical alignment (VA) layer of nematic (N) liquid crystal (LC), which can be applied for the fabrication of remote-controllable optical devices. Without the conventional polymer-based LC alignment process, a perfect VA layer was automatically constructed by directly adding the 0.1 wt % CELA₁D-OH in the N-LC media. The programmed CELA₁D-OH giant surfactants in the N-LC media gradually diffused onto the substrates of LC cell and self-assembled to the expanded monolayer structure, which can provide enough empty spaces for N-LC molecules to crawl into the empty zones for the construction of VA layer. On the other hand, the CELA₃D-OH giant surfactants forming the condensed monolayer structure on the substrates exhibited a planar alignment (PA) rather than a VA. Upon tuning the wavelength of light, the N-LC alignments were reversibly switched between VA and PA in the remote-controllable LC optical devices. Based on the experimental results, it was realized that understanding the interactions between N-LC molecules and amphiphilic giant surfactants is critical to design the suitable materials for the automatic LC alignment

Geometric Transformations Afforded by Rotational Freedom in Aramid Amphiphile Nanostructures

Molecular self-assembly in water leads to nanostructure geometries that can be tuned owing to the highly dynamic nature of amphiphiles. There is growing interest in strongly interacting amphiphiles with suppressed dynamics, as they exhibit ultrastability in extreme environments. However, such amphiphiles tend to assume a limited range of geometries upon self-assembly due to the specific spatial packing induced by their strong intermolecular interactions. To overcome this limitation while maintaining structural robustness, we incorporate rotational freedom into the aramid amphiphile molecular design by introducing a diacetylene moiety between two aramid units, resulting in diacetylene aramid amphiphiles (D-AAs). This design strategy enables rotations along the carbon–carbon sp hybridized bonds of an otherwise fixed aramid domain. We show that varying concentrations and equilibration temperatures of D-AA in water lead to self-assembly into four different nanoribbon geometries: short, extended, helical, and twisted nanoribbons, all while maintaining robust structure with thermodynamic stability. We use advanced microscopy, X-ray scattering, spectroscopic techniques, and two-dimensional (2D) NMR to understand the relationship between conformational freedom within strongly interacting amphiphiles and their self-assembly pathways

Construction of Polymer-Stabilized Automatic MultiDomain Vertical Molecular Alignment Layers with Pretilt Angles by Photopolymerizing Dendritic Monomers under Electric Fields

The synthesized itaconic acid-based dendritic amphiphile (Ita3C₁₂) monomers and the methacryl polyhedral oligomeric silsesquioxane (MAPOSS) cross-linkers were directly introduced for the construction of automatic vertical alignment (auto-VA) layers in the host nematic liquid crystal (NLC) medium. The auto-VA layer can be stabilized by irradiating UV light. For the automatic fabrication of a polymer-stabilized multidomain VA (PS auto-MDVA) layer with a pretilt angle, Ita3C₁₂ and MAPOSS were photopolymerized under the electric field by irradiating UV light on the multidomain electrode cell. Mainly because of the pretilted NLC at zero voltage, the electro-optic properties of the PS auto-MDVA cell were dramatically improved. From the morphological observations combined with surface chemical analyses, it was found that various sizes of protrusions on the solid substrates were automatically constructed by the two-step mechanisms. We demonstrated the PS auto-MDVA cell with the enhancement of electro-optic properties as a single-step process and investigated how the protrusions were automatically developed during the polymer stabilization

Pyrene-Based Asymmetric Supramolecule: Kinetically Controlled Polymorphic Superstructures by Molecular Self-Assembly

To understand the kinetically controlled polymorphic superstructures of asymmetric supramolecules, a pyrene-based asymmetric supramolecule (abbreviated as Py3M) was newly synthesized by connecting two pyrene headgroups (Py) to a biphenyl-based dendritic tail (3M) with an iso­phthala­mide connector. On the basis of thermal, microscopic, spectroscopic, and scattering results, it was realized that Py3M exhibited the monotropic phase transition between a stable crystalline phase (K1) and a metastable crystalline phase (K2). This monotropic phase transition behavior was mainly originated from the competitions of intra- and intermolecular interactions (π–π interactions and hydrogen bonds) as well as from the nanophase separations. From the two-dimensional (2D) wide-angle X-ray diffraction patterns and transmission electron microscopy images of the self-assembled Py3M superstructures, it was found that Py3M formed two synclinically tilted crystalline superstructures: the 6.75 and 4.4 nm periodicities of layered structures for K1 and K2 phases, respectively. The stable K1 phase was predominantly induced by the π–π interactions between pyrenes, while the intermolecular hydrogen bonds between iso­phthala­mides were the main driving forces for the formation of the metastable K2 phase. Ultraviolet–visible and photoluminescence experiments indicated that the photophysical properties of Py3M were directly related to their molecular packing superstructures

Flexible and Patterned Thin Film Polarizer: Photopolymerization of Perylene-based Lyotropic Chromonic Reactive Mesogens

A perylene-based reactive mesogen (DAPDI) forming a lyotropic chromonic liquid crystal (LCLC) phase was newly designed and synthesized for the fabrication of macroscopically oriented and patterned thin film polarizer (TFP) on the flexible polymer substrates. The anisotropic optical property and molecular self-assembly of DAPDI were investigated by the combination of microscopic, scattering and spectroscopic techniques. The main driving forces of molecular self-assembly were the face-to-face π–π intermolecular interaction among aromatic cores and the nanophase separation between hydrophilic ionic groups and hydrophobic aromatic cores. Degree of polarization for the macroscopically oriented and photopolymerized DAPDI TFP was estimated to be 99.81% at the <i><b>λ</b></i>_max = 491 nm. After mechanically shearing the DAPDI LCLC aqueous solution on the flexible polymer substrates, we successfully fabricated the patterned DAPDI TFP by etching the unpolymerized regions selectively blocked by a photomask during the photopolymerization process. Chemical and mechanical stabilities were confirmed by the solvent and pencil hardness tests, and its surface morphology was further investigated by optical microscopy, atomic force microscopy, and three-dimensional surface nanoprofiler. The flexible and patterned DAPDI TFP with robust chemical and mechanical stabilities can be a stepping stone for the advanced flexible optoelectronic devices

Hierarchical Striped Walls Constructed by the Photopolymerization of Discotic Reactive Building Blocks in the Anisotropic Liquid Crystal Solvents

A triphenylene-based reactive mesogenic molecule (abbreviated as HABET) was newly designed and synthesized as a programmed building block to construct the striped walls by the photopolymerization in the anisotropic liquid crystal (LC) solvents. On the basis of thermal, scattering and microscopic analyses, it was found that HABET formed three ordered structures: a columnar hexagonal LC phase (Φ_H), a tilted columnar hexagonal LC phase (Φ_T) and a highly ordered columnar oblique crystal phase (Φ_OK). The microscopic molecular orientations in the hierarchical superstructures were controlled in the anisotropic LC solvents with the help of surface anchoring forces, while the dimensions of the striped wall morphologies were determined by the patterned photomasks. The long axis of self-assembled columns in the striped walls was perpendicular to the surface alignment direction regardless of the photomask direction. Additionally, it was realized that the shapes of water drops as well as the surface water contact angles can be tuned by the hierarchical superstructures and morphologies of the polymerized HABET networks. The anisotropic hierarchical superstructures and morphologies concurrently fabricated during the polymerization in the anisotropic LC medium can offer a potential pathway for liquid transportation in the microfluidic devices

Azobenzene Molecular Machine: Light-Induced Wringing Gel Fabricated from Asymmetric Macrogelator

To develop light-triggered wringing gels, an asymmetric macrogelator (1AZ3BP) was newly synthesized by the chemically bridging a photoisomerizable azobenzene (1AZ) molecular machine and a biphenyl-based (3BP) dendron with a 1,4-phenylenediformamide connector. 1AZ3BP was self-assembled into a layered superstructure in the bulk state, but 1AZ3BP formed a three-dimensional (3D) network organogel in solution. Upon irradiating UV light onto the 3D network organogel, the solvent of the organogel was squeezed and the 3D network was converted to the layered morphology. It was realized that the metastable 3D network organogels were fabricated mainly due to the nanophase separation in solution. UV isomerization of 1AZ3BP provided sufficient molecular mobility to form strong hydrogen bonds for the construction of the stable layered superstructure. The light-triggered wringing gels can be smartly applied in remote-controlled generators, liquid storages, and sensors

Self-Assembled Hierarchical Superstructures from the Benzene-1,3,5-Tricarboxamide Supramolecules for the Fabrication of Remote-Controllable Actuating and Rewritable Films

The well-defined hierarchical superstructures constructed by the self-assembly of programmed supramolecules can be organized for the fabrication of remote-controllable actuating and rewritable films. To realize this concept, we newly designed and synthesized a benzene-1,3,5-tricarboxamide (BTA) derivative (abbreviated as BTA-3AZO) containing photoresponsive azobenzene (AZO) mesogens on the periphery of the BTA core. BTA-3AZO was first self-assembled to nanocolumns mainly driven by the intermolecular hydrogen-bonds between BTA cores, and these self-assembled nanocolumns were further self-organized laterally to form the low-ordered hexagonal columnar liquid crystal (LC) phase below the isotropization temperature. Upon cooling, a lamello-columnar crystal phase emerged at room temperature via a highly ordered lamello-columnar LC phase. The three-dimensional (3D) organogel networks consisted of fibrous and lamellar superstructures were fabricated in the BTA-3AZO cyclohexane-methanol solutions. By tuning the wavelength of light, the shape and color of the 3D networked thin films were remote-controlled by the conformational changes of azobenzene moieties in the BTA-3AZO. The demonstrations of remote-controllable 3D actuating and rewritable films with the self-assembled hierarchical BTA-3AZO thin films can be stepping stones for the advanced flexible optoelectronic devices