Nanofilament-Coated Superhydrophobic Membranes Show Enhanced Flux and Fouling Resistance in Membrane Distillation

Membrane distillation (MD) is an important technique for brine desalination and wastewater treatment that may utilize waste or solar heat. To increase the distillation rate and minimize membrane wetting and fouling, we deposit a layer of polysiloxane nanofilaments on microporous membranes. In this way, composite membranes with multiscale pore sizes are created. The performance of these membranes in the air gap and direct contact membrane distillation was investigated in the presence of salt solutions, solutions containing bovine serum albumin, and solutions containing the surfactant sodium dodecyl sulfate. In comparison to conventional hydrophobic membranes, our multiscale porous membranes exhibit superior fouling resistance while attaining a higher distillation flux without using fluorinated compounds. This study demonstrates a viable method for optimizing MD processes for wastewater and saltwater treatment

Tunable Water Harvesting Surfaces Consisting of Biphilic Nanoscale Topography

Water scarcity has become a global issue of severe concern. Great efforts have been undertaken to develop low-cost and highly efficient condensation strategies to relieve water shortages in arid regions. However, the rationale for design of an ideal condensing surface remains lacking due to the conflicting requirements for water nucleation and transport. In this work, we demonstrate that a biphilic nanoscale topography created by a scalable surface engineering method can achieve an ultraefficient water harvesting performance. With hydrophilic nanobumps on top of a superhydrophobic substrate, this biphilic topography combines the merits of biological surfaces with distinct wetting features (e.g., fog-basking beetles and water-repellent lotus), which enables a tunable water nucleation phenomenon, in contrast to the random condensation mode on their counterparts. By adjusting the contrasting wetting features, the characteristic water nucleation spacing can be tuned to balance the nucleation enhancement and water transport to cope with various environments. Guided by our nucleation density model, we show an optimal biphilic topography by tuning the nanoscale hydrophilic structure density, which allows an ∼349% water collection rate and ∼184% heat transfer coefficient as compared to the state-of-the-art superhydrophobic surface in a moisture-lacking atmosphere, offering a very promising strategy for improving the efficiency of water harvesting in drought areas

Tunable Water Harvesting Surfaces Consisting of Biphilic Nanoscale Topography

Water scarcity has become a global issue of severe concern. Great efforts have been undertaken to develop low-cost and highly efficient condensation strategies to relieve water shortages in arid regions. However, the rationale for design of an ideal condensing surface remains lacking due to the conflicting requirements for water nucleation and transport. In this work, we demonstrate that a biphilic nanoscale topography created by a scalable surface engineering method can achieve an ultraefficient water harvesting performance. With hydrophilic nanobumps on top of a superhydrophobic substrate, this biphilic topography combines the merits of biological surfaces with distinct wetting features (e.g., fog-basking beetles and water-repellent lotus), which enables a tunable water nucleation phenomenon, in contrast to the random condensation mode on their counterparts. By adjusting the contrasting wetting features, the characteristic water nucleation spacing can be tuned to balance the nucleation enhancement and water transport to cope with various environments. Guided by our nucleation density model, we show an optimal biphilic topography by tuning the nanoscale hydrophilic structure density, which allows an ∼349% water collection rate and ∼184% heat transfer coefficient as compared to the state-of-the-art superhydrophobic surface in a moisture-lacking atmosphere, offering a very promising strategy for improving the efficiency of water harvesting in drought areas

Recurrent Filmwise and Dropwise Condensation on a Beetle Mimetic Surface

Vapor condensation plays a key role in a wide range of industrial applications including power generation, thermal management, water harvesting and desalination. Fast droplet nucleation and efficient droplet departure as well as low interfacial thermal resistance are important factors that determine the thermal performances of condensation; however, these properties have conflicting requirements on the structural roughness and surface chemistry of the condensing surface or condensation modes (<i>e.g.</i>, filmwise <i>vs</i> dropwise). Despite intensive efforts over the past few decades, almost all studies have focused on the dropwise condensation enabled by superhydrophobic surfaces. In this work, we report the development of a bioinspired hybrid surface with high wetting contrast that allows for seamless integration of filmwise and dropwise condensation modes. We show that the synergistic cooperation in the observed recurrent condensation modes leads to improvements in all aspects of heat transfer properties including droplet nucleation density, growth rate, and self-removal, as well as overall heat transfer coefficient. Moreover, we propose an analytical model to optimize the surface morphological features for dramatic heat transfer enhancement

Tunable Water Harvesting Surfaces Consisting of Biphilic Nanoscale Topography

Water scarcity has become a global issue of severe concern. Great efforts have been undertaken to develop low-cost and highly efficient condensation strategies to relieve water shortages in arid regions. However, the rationale for design of an ideal condensing surface remains lacking due to the conflicting requirements for water nucleation and transport. In this work, we demonstrate that a biphilic nanoscale topography created by a scalable surface engineering method can achieve an ultraefficient water harvesting performance. With hydrophilic nanobumps on top of a superhydrophobic substrate, this biphilic topography combines the merits of biological surfaces with distinct wetting features (e.g., fog-basking beetles and water-repellent lotus), which enables a tunable water nucleation phenomenon, in contrast to the random condensation mode on their counterparts. By adjusting the contrasting wetting features, the characteristic water nucleation spacing can be tuned to balance the nucleation enhancement and water transport to cope with various environments. Guided by our nucleation density model, we show an optimal biphilic topography by tuning the nanoscale hydrophilic structure density, which allows an ∼349% water collection rate and ∼184% heat transfer coefficient as compared to the state-of-the-art superhydrophobic surface in a moisture-lacking atmosphere, offering a very promising strategy for improving the efficiency of water harvesting in drought areas

Tunable Water Harvesting Surfaces Consisting of Biphilic Nanoscale Topography

Water scarcity has become a global issue of severe concern. Great efforts have been undertaken to develop low-cost and highly efficient condensation strategies to relieve water shortages in arid regions. However, the rationale for design of an ideal condensing surface remains lacking due to the conflicting requirements for water nucleation and transport. In this work, we demonstrate that a biphilic nanoscale topography created by a scalable surface engineering method can achieve an ultraefficient water harvesting performance. With hydrophilic nanobumps on top of a superhydrophobic substrate, this biphilic topography combines the merits of biological surfaces with distinct wetting features (e.g., fog-basking beetles and water-repellent lotus), which enables a tunable water nucleation phenomenon, in contrast to the random condensation mode on their counterparts. By adjusting the contrasting wetting features, the characteristic water nucleation spacing can be tuned to balance the nucleation enhancement and water transport to cope with various environments. Guided by our nucleation density model, we show an optimal biphilic topography by tuning the nanoscale hydrophilic structure density, which allows an ∼349% water collection rate and ∼184% heat transfer coefficient as compared to the state-of-the-art superhydrophobic surface in a moisture-lacking atmosphere, offering a very promising strategy for improving the efficiency of water harvesting in drought areas

A super liquid-repellent hierarchical porous membrane for efficient water desalination

Source data of Figures 1-6 of the manuscript on a novel type of superhydrophobic membranes for membrane distillation, based on nanofilament coatings

Controllable Formation of Monodisperse Polymer Microbubbles as Ultrasound Contrast Agents

Microbubbles have been widely used as ultrasound contrast agents in clinical diagnosis and hold great potential for ultrasound-mediated therapy. However, polydispersed population and short half-life time (<10 min) of the microbubbles still limit their applications in imaging and therapy. To tackle these problems, we develop a microfluidic flow-focusing approach to produce monodisperse microbubbles stabilized by Poly­(lactic-co-glycolic acid) (PLGA) as the polymer shell. The size of PLGA microbubbles can be tightly controlled from ∼600 nm to ∼7 μm with a coefficient of variation less than 4% in size distribution for ensuring highly homogeneous echogenic behavior of PLGA polymer microbubbles in ultrasound fields. Both in vitro and in vivo experiments showed that the monodisperse PLGA microbubbles had excellent echogenicity and elongated sonographic duration time (>3 times) for ultrasound imaging in comparison with the commercial lipid microbubbles

Plasma-Induced Superhydrophobicity as a Green Technology for Enhanced Air Gap Membrane Distillation

Superhydrophobicity has only recently become a requirement in membrane fabrication and modification. Superhydrophobic membranes have shown improved flux performance and scaling resistance in long-term membrane distillation (MD) operations compared to simply hydrophobic membranes. Here, we introduce plasma micro- and nanotexturing followed by plasma deposition as a novel, dry, and green method for superhydrophobic membrane fabrication. Using plasma micro- and nanotexturing, commercial membranes, both hydrophobic and hydrophilic, are transformed to superhydrophobic featuring water static contact angles (WSCA) greater than 150° and contact angle hysteresis lower than 10°. To this direction, hydrophobic polytetrafluoro­ethylene (PTFE) and hydrophilic cellulose acetate (CA) membranes are transformed to superhydrophobic. The superhydrophobic PTFE membranes showed enhanced water flux in standard air gap membrane distillation and more stable performance compared to the commercial ones for at least 48 h continuous operation, with salt rejection >99.99%. Additionally, their performance and high salt rejection remained stable, when low surface tension solutions containing sodium dodecyl sulfate (SDS) and NaCl (down to 35 mN/m) were used, showcasing their antiwetting properties. The improved performance is attributed to superhydrophobicity and increased pore size after plasma micro- and nanotexturing. More importantly, CA membranes, which are initially unsuitable for MD due to their hydrophilic nature (WSCA ≈ 40°), showed excellent performance with stable flux and salt rejection >99.2% again for at least 48 h, demonstrating the effectiveness of the proposed method for wetting control in membranes regardless of their initial wetting properties