Peel Adhesion Strength between Epoxy Resin and Hydrated Silica Surfaces: A Density Functional Theory Study

Adhesive strength is known to change significantly depending on the direction of the force applied. In this study, the peel and tensile adhesive forces between the hydroxylated silica (001) surface and epoxy resin are estimated based on quantum chemical calculations. Here, density functional theory (DFT) with dispersion correction is used. In the peel process, the epoxy resin is pulled off from the terminal part, while in the tensile process, the entire epoxy resin is pulled off vertically. As a result of these calculations, the maximum adhesive force in the peel process is decreased to be about 40% of that in the tensile process. The adhesion force–displacement curve for the peeling process shows two characteristic peaks corresponding to the process where the adhesive molecule horizontally oriented to the surface shifts to a vertical orientation to the surface and the process where the vertical adhesive molecule is dissociated from the surface. Force decomposition analysis is performed to further understand the peel adhesion force; the contribution of the dispersion force is found to be slightly larger than that of the DFT force. This feature is common to the tensile process as well. Each force in the peel process is about 40% smaller than the corresponding force in the tensile process

Quantum Chemical Calculations to Trace Back Reaction Paths for the Prediction of Reactants

The long-due development of a computational method for the ab initio prediction of chemical reactants that provide a target compound has been hampered by the combinatorial explosion that occurs when reactions consist of multiple elementary reaction processes. To address this challenge, we have developed a quantum chemical calculation method that can enumerate the reactant candidates from a given target compound by combining an exhaustive automated reaction path search method with a kinetics method for narrowing down the possibilities. Two conventional name reactions were then assessed by tracing back the reaction paths using this new method to determine whether the known reactants could be identified. Our method is expected to be a powerful tool for the prediction of reactants and the discovery of new reactions

Elucidating the Effects of Chemisorbed Water Molecules on the Adhesive Interactions of Epoxy Resin to γ‑Alumina Surfaces

The adhesion mechanism of epoxy resin to the γ-alumina (110) surface was investigated using first-principles density functional theory (DFT). Aluminum materials are lightweight and are used in a wide range of industrial fields. Its surface is oxidized to alumina, and the stable surface is known as the γ-alumina (110) surface. The coverage of hydroxy groups by chemisorbed water molecules on this surface varied depending on the pretreatment temperature. In this study, we investigated the adhesive interactions of epoxy resin on four alumina surfaces with different densities of surface hydroxy groups (0, 3, 6, and 9 OH/nm2) and have discussed their effects. At each interface, the energy curves of the vertically displaced epoxy resin were calculated and the adhesive forces were estimated by differentiating these curves. As the coverage of the surface hydroxy groups increased from 0 to 6 OH/nm2, the adhesive strength gradually decreased. However, the adhesive strength at 9 OH/nm2 was relatively large and almost equal to that at 3 OH/nm2. This inverse volcano-type behavior was analyzed via the decomposition of adhesive forces and the crystal orbital Hamilton population (COHP). The decomposition of adhesive forces into DFT and dispersion components revealed that the inverse volcano-type behavior is derived from the DFT component, and the interfacial interactions owing to the DFT component are accompanied by charge transfer. These were investigated using a COHP analysis, which revealed that this behavior was caused by changes in the activity of the aluminum atoms on the surface and surface reconstruction by chemisorbed water molecules. It is noteworthy that the adhesive strength for 9 OH/nm2 was only 6.9% lower than that for 0 OH/nm2 wherein the chemisorbed water molecules were completely removed from the surface. These results are expected to provide a guideline for the adhesion of epoxy resin to aluminum materials

Molecular Understanding of Adhesion of Epoxy Resin to Graphene and Graphene Oxide Surfaces in Terms of Orbital Interactions

The adhesion mechanism of epoxy resin (ER) cured material consisting of diglycidyl ether of bisphenol A (DGEBA) and 4,4′-diaminodiphenyl sulfone (DDS) to pristine graphene and graphene oxide (GO) surfaces is investigated on the basis of first-principles density functional theory (DFT) with dispersion correction. Graphene is often used as a reinforcing filler incorporated into ER polymer matrices. The adhesion strength is significantly improved by using GO obtained by the oxidation of graphene. The interfacial interactions at the ER/graphene and ER/GO interfaces were analyzed to clarify the origin of this adhesion. The contribution of dispersion interaction to the adhesive stress at the two interfaces is almost identical. In contrast, the DFT energy contribution is found to be more significant at the ER/GO interface. Crystal orbital Hamiltonian population (COHP) analysis suggests the existence of hydrogen bonding (H-bonding) between the hydroxyl, epoxide, amine, and sulfonyl groups of the ER cured with DDS and the hydroxyl groups of the GO surface, in addition to the OH−π interaction between the benzene rings of ER and the hydroxyl groups of the GO surface. The H-bond has a large orbital interaction energy, which is found to contribute significantly to the adhesive strength at the ER/GO interface. The overall interaction at the ER/graphene is much weaker due to antibonding type interactions just below the Fermi level. This finding indicates that only dispersion interaction is significant when ER is adsorbed on the graphene surface