Anomalous magnetoresistance in the spinel superconductor LiTi2O4

LiTi2O4 is a unique compound in that it is the only known spinel oxide superconductor. The lack of high quality single crystals has thus far prevented systematic investigations of its transport properties. Here we report a careful study of transport and tunnelling spectroscopy in epitaxial LiTi2O4 thin films. An unusual magnetoresistance is observed which changes from nearly isotropic negative to prominently anisotropic positive as the temperature is decreased. We present evidence that shows that the negative magnetoresistance likely stems from the suppression of local spin fluctuations or spin-orbit scattering centres. The positive magnetoresistance suggests the presence of an orbital-related state, also supported by the fact that the superconducting energy gap decreases as a quadratic function of magnetic field. These observations indicate that the spin-orbital fluctuations play an important role in LiTi2O4 in a manner similar to high-temperature superconductors

Improving the multiobjective evolutionary algorithm based on decomposition with new penalty schemes

It has been increasingly reported that the multiobjective optimization evolutionary algorithm based on decomposition (MOEA/D) is promising for handling multiobjective optimization problems (MOPs). MOEA/D employs scalarizing functions to convert an MOP into a number of single-objective subproblems. Among them, penalty boundary intersection (PBI) is one of the most popular decomposition approaches and has been widely adopted for dealing with MOPs. However, the original PBI uses a constant penalty value for all subproblems and has difficulties in achieving a good distribution and coverage of the Pareto front for some problems. In this paper, we investigate the influence of the penalty factor on PBI, and suggest two new penalty schemes, i.e., adaptive penalty scheme and subproblem-based penalty scheme (SPS), to enhance the spread of Pareto-optimal solutions. The new penalty schemes are examined on several complex MOPs, showing that PBI with the use of them is able to provide a better approximation of the Pareto front than the original one. The SPS is further integrated into two recently developed MOEA/D variants to help balance the population diversity and convergence. Experimental results show that it can significantly enhance the algorithmâ??s performance. © 2016, Springer-Verlag Berlin Heidelberg.</p

Control of Direct Written Ink Droplets Using Electrowetting

Here, we investigate the feasibility and effectiveness of electrowetting in the motion control of droplets of different liquids, which are widely used as inks in direct writing (DW)-based three-dimensional (3D) printing processes for various applications. To control the movement of DW ink droplets on dielectric substrates, the electrodes were embedded in the substrate. It is demonstrated that droplets of pure liquid inks, aqueous polymer solution inks, and carbon fiber suspension inks can be moved on multi-angled surfaces. Also, experimental results reveal that droplets of a commercial hydrogel, agar–agar, alginate, xanthan gum, and gum arabic can be moved by electrowetting. Droplets of sizes 200 μm−3 mm were manipulated and moved by the electric field on different dielectric substrates accurately and repeatedly. Effective electrowetting-based control and movement of droplets were observed on horizontal, vertical, and even inverted substrates. These findings imply the feasibility and potential application of electrowetting as a flexible, rapid, and new method for ink droplet control in 3D printing processes

Control of Direct Written Ink Droplets Using Electrowetting

Here, we investigate the feasibility and effectiveness of electrowetting in the motion control of droplets of different liquids, which are widely used as inks in direct writing (DW)-based three-dimensional (3D) printing processes for various applications. To control the movement of DW ink droplets on dielectric substrates, the electrodes were embedded in the substrate. It is demonstrated that droplets of pure liquid inks, aqueous polymer solution inks, and carbon fiber suspension inks can be moved on multi-angled surfaces. Also, experimental results reveal that droplets of a commercial hydrogel, agar–agar, alginate, xanthan gum, and gum arabic can be moved by electrowetting. Droplets of sizes 200 μm−3 mm were manipulated and moved by the electric field on different dielectric substrates accurately and repeatedly. Effective electrowetting-based control and movement of droplets were observed on horizontal, vertical, and even inverted substrates. These findings imply the feasibility and potential application of electrowetting as a flexible, rapid, and new method for ink droplet control in 3D printing processes

Control of Direct Written Ink Droplets Using Electrowetting

Here, we investigate the feasibility and effectiveness of electrowetting in the motion control of droplets of different liquids, which are widely used as inks in direct writing (DW)-based three-dimensional (3D) printing processes for various applications. To control the movement of DW ink droplets on dielectric substrates, the electrodes were embedded in the substrate. It is demonstrated that droplets of pure liquid inks, aqueous polymer solution inks, and carbon fiber suspension inks can be moved on multi-angled surfaces. Also, experimental results reveal that droplets of a commercial hydrogel, agar–agar, alginate, xanthan gum, and gum arabic can be moved by electrowetting. Droplets of sizes 200 μm−3 mm were manipulated and moved by the electric field on different dielectric substrates accurately and repeatedly. Effective electrowetting-based control and movement of droplets were observed on horizontal, vertical, and even inverted substrates. These findings imply the feasibility and potential application of electrowetting as a flexible, rapid, and new method for ink droplet control in 3D printing processes

Control of Direct Written Ink Droplets Using Electrowetting

Here, we investigate the feasibility and effectiveness of electrowetting in the motion control of droplets of different liquids, which are widely used as inks in direct writing (DW)-based three-dimensional (3D) printing processes for various applications. To control the movement of DW ink droplets on dielectric substrates, the electrodes were embedded in the substrate. It is demonstrated that droplets of pure liquid inks, aqueous polymer solution inks, and carbon fiber suspension inks can be moved on multi-angled surfaces. Also, experimental results reveal that droplets of a commercial hydrogel, agar–agar, alginate, xanthan gum, and gum arabic can be moved by electrowetting. Droplets of sizes 200 μm−3 mm were manipulated and moved by the electric field on different dielectric substrates accurately and repeatedly. Effective electrowetting-based control and movement of droplets were observed on horizontal, vertical, and even inverted substrates. These findings imply the feasibility and potential application of electrowetting as a flexible, rapid, and new method for ink droplet control in 3D printing processes

Control of Direct Written Ink Droplets Using Electrowetting

Here, we investigate the feasibility and effectiveness of electrowetting in the motion control of droplets of different liquids, which are widely used as inks in direct writing (DW)-based three-dimensional (3D) printing processes for various applications. To control the movement of DW ink droplets on dielectric substrates, the electrodes were embedded in the substrate. It is demonstrated that droplets of pure liquid inks, aqueous polymer solution inks, and carbon fiber suspension inks can be moved on multi-angled surfaces. Also, experimental results reveal that droplets of a commercial hydrogel, agar–agar, alginate, xanthan gum, and gum arabic can be moved by electrowetting. Droplets of sizes 200 μm−3 mm were manipulated and moved by the electric field on different dielectric substrates accurately and repeatedly. Effective electrowetting-based control and movement of droplets were observed on horizontal, vertical, and even inverted substrates. These findings imply the feasibility and potential application of electrowetting as a flexible, rapid, and new method for ink droplet control in 3D printing processes

Control of Direct Written Ink Droplets Using Electrowetting

Here, we investigate the feasibility and effectiveness of electrowetting in the motion control of droplets of different liquids, which are widely used as inks in direct writing (DW)-based three-dimensional (3D) printing processes for various applications. To control the movement of DW ink droplets on dielectric substrates, the electrodes were embedded in the substrate. It is demonstrated that droplets of pure liquid inks, aqueous polymer solution inks, and carbon fiber suspension inks can be moved on multi-angled surfaces. Also, experimental results reveal that droplets of a commercial hydrogel, agar–agar, alginate, xanthan gum, and gum arabic can be moved by electrowetting. Droplets of sizes 200 μm−3 mm were manipulated and moved by the electric field on different dielectric substrates accurately and repeatedly. Effective electrowetting-based control and movement of droplets were observed on horizontal, vertical, and even inverted substrates. These findings imply the feasibility and potential application of electrowetting as a flexible, rapid, and new method for ink droplet control in 3D printing processes

Control of Direct Written Ink Droplets Using Electrowetting

Here, we investigate the feasibility and effectiveness of electrowetting in the motion control of droplets of different liquids, which are widely used as inks in direct writing (DW)-based three-dimensional (3D) printing processes for various applications. To control the movement of DW ink droplets on dielectric substrates, the electrodes were embedded in the substrate. It is demonstrated that droplets of pure liquid inks, aqueous polymer solution inks, and carbon fiber suspension inks can be moved on multi-angled surfaces. Also, experimental results reveal that droplets of a commercial hydrogel, agar–agar, alginate, xanthan gum, and gum arabic can be moved by electrowetting. Droplets of sizes 200 μm−3 mm were manipulated and moved by the electric field on different dielectric substrates accurately and repeatedly. Effective electrowetting-based control and movement of droplets were observed on horizontal, vertical, and even inverted substrates. These findings imply the feasibility and potential application of electrowetting as a flexible, rapid, and new method for ink droplet control in 3D printing processes