Electrografting of Stimuli-Responsive, Redox Active Organometallic Polymers to Gold from Ionic Liquids

Robust, dense, redox active organometallic poly­(ferrocenylsilane) (PFS) grafted films were formed within 5 min by cathodic reduction of Au substrates, immersed in a solution of imidazolium–functionalized PFS chains in the ionic liquid 1-ethyl-3-methylimidazolium ethyl sulfate. The electrografted polymer films were employed as an electrochemical sensor, exhibiting high sensitivity, stability, and reproducibility

A Turn-on Fluorescent Sensor for Pyrophosphate Based on the Disassembly of Cu²⁺-Mediated Perylene Diimide Aggregates

A complex between an anionic perylene diimide derivative (PDI-GlyAsp) and cupric ion has been prepared and applied to be turn-on fluorescent probe for the detection of pyrophosphate (PPi) in 100% aqueous solution. The complex formation process and PPi detection have been studied by absorption and emission spectroscopy. It was confirmed that the introduction of cupric ion into PDI-GlyAsp solution resulted in the assembly of PDI-GlyAsp into PDI-GlyAsp/Cu²⁺ aggregates, leading to the fluorescence quenching of PDI-GlyAsp. Upon addition of PPi into the above solution led to the disassembly of the aggregates due to the competitive binding of PPi with Cu²⁺ in the PDI-GlyAsp/Cu²⁺ complex, and a recovery of PDI-GlyAsp emission was observed. Therefore, the PDI-GlyAsp/Cu²⁺ complex can be applied as a turn-on fluorescent probe for detecting PPi with high selectivity and sensitivity

Electrothermal Phase Change Composite with Flexibility over a Wide Temperature Range for Wearable Thermotherapy

Flexible electrothermal composite phase change materials (PCMs) are promising candidates for portable thermotherapy. However, a great challenge remains to achieve high PCM loading while maintaining reasonable flexibility. Herein, the polypyrrole-decorated melamine foam (PPy@MF) was fabricated and thereafter applied to confine binary PCM mixtures composed of a high-enthalpy long-chain polyethylene glycol (PEG4000) and its short-chain homologue (PEG200) to make the novel PPy@MF-PEG4000+200 composite PCM. At a high loading of up to 74.1% PEG4000 and a high latent heat energy storage density of 150.1 J/g, the composite PCM remained flexible at temperature (−20 °C) far below its phase transition point thanks to the plasticine effect of PEG200. The composite also demonstrated good Joule heating performance, providing fast heating from 28 to 70 °C at low applied voltages (4.5–6.0 V). The energy could be stored efficiently and released to maintain the composites at the proper temperature. The electrothermal performance of the composite remained undisturbed during curved or repeated bending, showing good potential to be used for personal thermal management and thermotherapy

Highly Sensitive, Label-Free Detection of 2,4-Dichlorophenoxyacetic Acid Using an Optofluidic Chip

A highly sensitive approach for rapid and label-free detection of the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) using an optofluidic chip is demonstrated. The optofluidic chip is prepared by covalent immobilization of 2,4-D-bovine serum albumin (2,4-D-BSA) conjugate to an integrated microring resonator. Subsequent detection of 2,4-D carried out in a competitive immunoreaction format enables selective detection of 2,4-D in different types of water samples, including bottled, tap, and lake water, at a limit of detection (LOD) of 4.5 pg/mL and in a quantitative range of 15–10⁵ pg/mL. The microring resonator-based optofluidic chip is reusable with ultrahigh sensitivity that offers real-time and on-site detection of low-molecular-weight targets for potential applications in food safety and environmental monitoring

Hydrogels with a Memory: Dual-Responsive, Organometallic Poly(ionic liquid)s with Hysteretic Volume-Phase Transition

We report on the synthesis and structure–property relations of a novel, dual-responsive organometallic poly­(ionic liquid) (PIL), consisting of a poly­(ferro­cenyl­silane) backbone of alternating redox-active, silane-bridged ferrocene units and tetra­alkyl­phosphonium sulfonate moieties in the side groups. This PIL is redox responsive due to the presence of ferrocene in the backbone and also exhibits a lower critical solution temperature (LCST)-type thermal responsive behavior. The LCST phase transition originates from the interaction between water molecules and the ionic substituents and shows a concentration-dependent, tunable transition temperature in aqueous solution. The PIL’s LCST-type transition temperature can also be influenced by varying the redox state of ferrocene in the polymer main chain. As the polymer can be readily cross-linked and is easily converted into hydrogels, it represents a new dual-responsive materials platform. Interestingly, the as-formed hydrogels display an unusual, strongly hysteretic volume-phase transition indicating useful thermal memory properties. By employing the dispersing abilities of this cationic PIL, CNT-hydrogel composites were successfully prepared. These hybrid conductive composite hydrogels showed bi-stable states and tunable resistance in heating–cooling cycles

Covalent Layer-by-Layer Assembly of Redox-Active Polymer Multilayers

Poly­(ferrocenyl­(3-bromopropyl)­methylsilane) and poly­(ethylene imine) are employed in a layer-by-layer deposition process to form covalently connected, redox-active multilayer thin films by means of an amine alkylation reaction. The stepwise buildup of these multilayers on silicon, ITO, and quartz substrates was monitored by UV–vis absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR), static contact angle measurements, surface plasmon resonance (SPR), atomic force microscopy, ellipsometry, and cyclic voltammetry, which provide evidence for a linear increase in multilayer thickness with the number of deposited bilayers. Upon oxidation and reduction, these covalently interconnected layers do not disassemble, in contrast to poly­(ferrocenylsilane) (PFS) layers featuring similar backbone structures that are held together by electrostatic forces. The PFS/PEI multilayers are effective for the electrochemical sensing of ascorbic acid and hydrogen peroxide and show improved sensing performance at higher bilayer numbers. These covalently linked layers are readily derivatized further and can therefore be regarded as a versatile platform for creating robust, tailorable, redox-active interfaces with applications in sensing and biofuel cells