Drinking Water in Rural China: Water Sources, Treatment, and Boiling Energy

Access to safe drinking water is a major public concern in China. A national survey of 57 029 households was conducted to fill major knowledge gaps on drinking water sources, end-of-use treatment methods, and energy used to boil water. Herein, we show that surface water and well water were frequently used by >147 million rural residents living in low-income inland and mountainous areas. Driven by socioeconomic development and government intervention, the level of access to tap water in rural China increased to 70% by 2017. Nevertheless, the rate was considerably lower than that in cities and unevenly distributed across the country. Approximately 90% of drinking water was boiled, an increase from 85% a decade ago. The contribution of electricity, mainly electric kettles, to the boiling of water was 69%. Similar to cooking, living conditions and heating requirements are the main influencing indicators of energy used to boil water. In addition to socioeconomic development, government intervention is a key factor driving the transition to safe water sources, universal access to tap water, and clean energy. Further improvement in drinking water safety in poor and remote rural areas remains challenging, and more intervention and more investment are needed

Petrogenesis of Permo-Triassic intrusive rocks in Northern Liaoning Province, NE China: implications for the closure of the eastern Paleo-Asian Ocean

The Changchun-Yanji belt recorded widespread Permo-Triassic magmatism, but their origins remain unclear, inhibiting a comprehensive understanding of the magmatic response to the final closure of the Paleo-Asian ocean in the eastern Central Asian Orogenic Belt (CAOB). Here, we present new geochronological, geochemical, and Hf isotopic data for the Permo-Triassic plutons from Northern Liaoning province, NE China. Combined the published ages with our new data, the Permo-Triassic magmatism in the eastern CAOB can be divided into five episodes: early Permian (293–274 Ma), middle–late Permian (270–257 Ma), latest late Permian–Middle Triassic (255–242 Ma), Late Triassic (240–215 Ma), and latest Late Triassic (209–200 Ma). The middle Permian and Late Triassic mafic plutons (i.e. ~266 Ma Mengjiagou gabbro–diorite, ~240 Ma Jiancaicun gabbro and ~224 Ma Shudetun gabbro-diorite) contain relatively high TFe2O3, MgO, Cr and Ni contents with positive εHf(t) values (+1.2 to +7.2), suggesting a depleted mantle origin. These mafic rocks together with the coeval granitoids make up typical bimodal associations, suggesting that they were formed under an extensional environment. The conclusions are also supported by occurrence of A-type granites during 270–257 Ma and 240–215 Ma. By contrast, the granitoids of 255–242 Ma in the eastern CAOB, including the Jianshanzi (~251 Ma) and Daganhe (~242 Ma) monzogranites, show typical geochemical features of adakitic granites, with high Sr/Y ratios and negative εHf(t) values (–8.6 to – 22.0), suggesting that the magmas were generated through partial melting of thickened ancient lower crust. Combined with previous studies, a four-stage tectonic evolution scenario was proposed: (1) active continental margin stage during 293–274 Ma; (2) continuing subduction resulted in the initiation collision, moderate crustal thickening, and slab break-off during 270–257 Ma; (3) final closure of the Paleo-Asian Ocean associated with continued crustal thickening occurred during 255–242 Ma; (4) lithospheric delamination in a post-collisional extensional environment occurred during 240–215 Ma. </p

Data_Sheet_1_Diversity, Bacterial Symbionts, and Antimicrobial Potential of Termite-Associated Fungi.docx

The phylogenetic diversity of fungi isolated from the Odontotermes formosanus was investigated by dilution-plate method, combined with morphological characteristics and 5.8S rDNA sequencing. Thirty-nine fungi were isolated and purified from O. formosanus, which were belonging to two phyla and four classes (Sordariomycetes, Dothideomycetes, Eurotiomycetes, Agaricomycetes). Furthermore, nine bacterial 16S rRNA sequences were obtained from total fungal genomic DNA. All bacterial symbionts were segmented into four genera: Bacillus, Methylobacterium, Paenibacillus, and Trabulsiella. The antimicrobial activities of all endophytic fungi extracts were tested by using the filter paper method against Escherichia coli (ATCC 8739), Bacillus subtilis (ATCC 6633), Staphylococcus aureus (ATCC 6538), and Canidia albicans (ATCC 10231). The results exhibited that 25 extracts (64%) exhibited antibacterial activity against at least one of the tested bacterial strains. Furthermore, the secondary metabolites 1 [5-hydroxyramulosin (1a):biatriosporin M (1b) = 2:1] from the Pleosporales sp. BYCDW4 exhibited potent antimicrobial activities against E. coli, C. albicans, B. subtilis, and S. aureus with the inhibition zone diameter (IZD) of 13.67, 14.33, 12.17, and 11.33 mm, respectively, which were comparable with those of the positive control. 1-(2,5-Dihydroxyphenyl)-3-hydroxybutan-1-one (2) from the Microdiplodia sp. BYCDW8 showed medium inhibitory activities against B. subtilis and S. aureus, with the IZD range of 8.32–9.13 mm. In conclusion, the study showed the diversity of insect symbionts could be expected to develop the resource of new species and antibiotics.</p

Data_Sheet_2_Diversity, Bacterial Symbionts, and Antimicrobial Potential of Termite-Associated Fungi.pdf

The phylogenetic diversity of fungi isolated from the Odontotermes formosanus was investigated by dilution-plate method, combined with morphological characteristics and 5.8S rDNA sequencing. Thirty-nine fungi were isolated and purified from O. formosanus, which were belonging to two phyla and four classes (Sordariomycetes, Dothideomycetes, Eurotiomycetes, Agaricomycetes). Furthermore, nine bacterial 16S rRNA sequences were obtained from total fungal genomic DNA. All bacterial symbionts were segmented into four genera: Bacillus, Methylobacterium, Paenibacillus, and Trabulsiella. The antimicrobial activities of all endophytic fungi extracts were tested by using the filter paper method against Escherichia coli (ATCC 8739), Bacillus subtilis (ATCC 6633), Staphylococcus aureus (ATCC 6538), and Canidia albicans (ATCC 10231). The results exhibited that 25 extracts (64%) exhibited antibacterial activity against at least one of the tested bacterial strains. Furthermore, the secondary metabolites 1 [5-hydroxyramulosin (1a):biatriosporin M (1b) = 2:1] from the Pleosporales sp. BYCDW4 exhibited potent antimicrobial activities against E. coli, C. albicans, B. subtilis, and S. aureus with the inhibition zone diameter (IZD) of 13.67, 14.33, 12.17, and 11.33 mm, respectively, which were comparable with those of the positive control. 1-(2,5-Dihydroxyphenyl)-3-hydroxybutan-1-one (2) from the Microdiplodia sp. BYCDW8 showed medium inhibitory activities against B. subtilis and S. aureus, with the IZD range of 8.32–9.13 mm. In conclusion, the study showed the diversity of insect symbionts could be expected to develop the resource of new species and antibiotics.</p

Indoor PM_2.5 Profiling with a Novel Side-Scatter Indoor Lidar

Indoor air pollution dominates respiration exposure because people spend most of their time indoors. Generally, indoor PM2.5 concentrations are monitored at a fixed height in the breathing zone. However, the concentrations of PM2.5 likely vary vertically; thus, the vertical concentration profiles would help improve the understanding of indoor air pollution. Based on the basic principle of bistatic Lidar for boundary aerosol profiling, an indoor Lidar (I-Lidar) was developed to profile the vertical distribution of PM2.5 by imaging the PM2.5 scattering of a vertical laser beam onto a complementary metal oxide semiconductor (CMOS) camera. Unlike bistatic Lidar, the I-Lidar views the vertical laser beam perpendicularly from the side, which enables a high and relatively uniform vertical resolution throughout the profile. The images collected by I-Lidar were adjusted for transmission and scattering attenuation and calibrated against the measured PM2.5 concentrations using an array of PM2.5 sensors. The new device was tested in the field, and the measurements in a living room and kitchen of a rural household revealed the existence of vertical trends and dynamic change of PM2.5 concentrations. Potential applications of the device are discussed