Dual Synthetic Receptor-Based Sandwich Electrochemical Sensor for Highly Selective and Ultrasensitive Detection of Pathogenic Bacteria at the Single-Cell Level

Sensitive and rapid detection of pathogenic bacteria is essential for effective source control and prevention of microbial infectious diseases. However, it remains a substantial challenge to rapidly detect bacteria at the single-cell level. Herein, we present an electrochemical sandwich sensor for highly selective and ultrasensitive detection of a single bacterial cell based on dual recognition by the bacteria-imprinted polymer film (BIF) and aptamer. The BIF was used as the capture probe, which was in situ fabricated on the electrode surface within 15 min via electropolymerization. The aptamer and electroactive 6-(Ferrocenyl)hexanethiol cofunctionalized gold nanoparticles (Au@Fc-Apt) were employed as the signal probe. Once the target bacteria were anchored on the BIF-modified electrode, the Au@Fc-Apt was further specifically bound to the bacteria, generating enhanced current signals for ultrasensitive detection of Staphylococcus aureus down to a single cell in phosphate buffer solution. Even in the complex milk samples, the sensor could detect as low as 10 CFU mL–1 of S. aureus without any complicated pretreatment except for 10-fold dilution. Moreover, the current response to the target bacteria was hardly affected by the coexisting multiple interfering bacteria, whose number is 30 times higher than the target, demonstrating the excellent selectivity of the sensor. Compared with most reported sandwich-type electrochemical sensors, this assay is more sensitive and more rapid, requiring less time (1.5 h) for the sensing interface construction. By virtue of its sensitivity, rapidity, selectivity, and cost-effectiveness, the sensor can serve as a universal detection platform for monitoring pathogenic bacteria in fields of food/public safety

Nitrogen-Doped Mesoporous Graphene as a Synergistic Electrocatalyst Matrix for High-Performance Oxygen Reduction Reaction

To balance the anchoring sites and conductivity of the catalyst supports is a dilemma in electrocatalytic oxygen reduction reaction (ORR). Nitrogen-doped mesoporous graphene (N-MG) with large surface area, high porosity, and superior intrinsic conductivity has been developed to address this issue. Using N-MG as the backbone, a hybrid catalyst of Co₃O₄ nanocrystals embedded on N-MG (Co₃O₄/N-MG) was prepared for the electrocatalytic ORR in alkaline media. The Co₃O₄/N-MG showed high catalytic activity for the four-electron ORR, giving a more positive onset potential (0.93 V vs RHE) and a higher current density. The unique property of N-MG and the synergetic effect of Co₃O₄ and N-MG are prominent for ORR. With improved electrocatalytic activity and durability, the Co₃O₄/N-MG can be an efficient nonprecious metal catalyst and potentially used to substitute the platinum-based cathode catalysts in fuel cells and metal–air batteries

Microfluidic Air Sampler for Highly Efficient Bacterial Aerosol Collection and Identification

The early warning capability of the presence of biological aerosol threats is an urgent demand in ensuing civilian and military safety. Efficient and rapid air sample collection in relevant indoor or outdoor environment is a key step for subsequent analysis of airborne microorganisms. Herein, we report a portable battery-powered sampler that is capable of highly efficient bioaerosol collection. The essential module of the sampler is a polydimethylsiloxane (PDMS) microfluidic chip, which consisted of a 3-loop double-spiral microchannel featuring embedded herringbone and sawtooth wave-shaped structures. <i>Vibrio parahemolyticus</i> (<i>V. parahemolyticus</i>) as a model microorganism, was initially employed to validate the bioaerosol collection performance of the device. Results showed that the sampling efficacy reached as high as >99.9%. The microfluidic sampler showed greatly improved capturing efficiency compared with traditional plate sedimentation methods. The high performance of our device was attributed to the horizontal inertial centrifugal force and the vertical turbulence applied to airflow during sampling. The centrifugation field and turbulence were generated by the specially designed herringbone structures when air circulated in the double-spiral microchannel. The sawtooth wave-shaped microstructure created larger specific surface area for accommodating more aerosols. Furthermore, a mixture of bacterial aerosols formed by <i>V. parahemolyticus</i>, <i>Listeria monocytogenes</i>, and <i>Escherichia coli</i> was extracted by the microfluidic sampler. Subsequent integration with mass spectrometry conveniently identified the multiple bacterial species captured by the sampler. Our developed stand-alone and cable-free sampler shows clear advantages comparing with conventional strategies, including portability, easy-to-use, and low cost, indicating great potential in future field applications