Desenvolvimento da química fundamental do molibdenio na modelagem biomimética funcional de molibdoenzimas

Orientador : Fabio Souza NunesCo-orientadora : Shirley NakagakiDissertação (mestrado) - Universidade Federal do Paraná, Setor de Tecnologia, Programa de Pós-Graduação em Química. Defesa: Curitiba, 2007Inclui bibliografi

Growth and Activation of an Amorphous Molybdenum Sulfide Hydrogen Evolving Catalyst

Amorphous molybdenum sulfide films, prepared by electrodeposition, are a class of highly active catalysts for hydrogen evolution. The growth mechanism of the films and the true active species were unclear. Herein, we report a study of the growth and activation of these films using Electrochemical Quartz Crystal Microbalance (EQCM) and X-ray photoelectron spectroscopy (XPS). Three processes, including oxidative deposition, reductive corrosion, and reductive deposition, are occurring during the growth of a molybdenum sulfide film. Deposition method, precursor concentration, and potential window are among the factors influencing the film growth. Regardless of deposition methods, all films exhibit similar catalytic activity on a per mass base. Potentiostatic oxidation (anodic electrolysis) is the method for fastest film growth; it produces a MoS3 film precatalyst which can be electrochemically activated. The activity of the MoS3 precatalyst scales with catalyst loading; at a loading of 0.2 mg/cm2, the current density is 20 mA/cm2 at an overpotential of 170 mV. Films differently deposited have different initial compositions, but the active catalysts in all films are the same MoS2+x species, whose XPS characteristics are distinct from those of crystalline MoS2. The activation process of a MoS3 film precatalyst involves a reductive removal of slightly less than one equivalent of sulfide to form MoS2+x

Molybdenum boride and carbide catalyze hydrogen evolution in both acidic and basic solutions

Molybdenum boride (MoB) and carbide (Mo2C) are excellent catalysts for electrochemical hydrogen evolution at both pH 0 and pH 14

Hydrogen evolution catalyzed by MoS3 and MoS2 particles

Amorphous MoS3 particles are prepared using a simple chemical method. Several deposition techniques are developed to fabricate electrodes loaded with MoS3 particles. These electrodes are highly active for hydrogen evolution. The catalytically active species appear to be reduced molybdenum sulfide that contains disulfide ligands. The MoS3 particles are annealed to form polycrystalline and single crystalline MoS3 and MoS2 particles. These particles, as well as commercial MoS2 micro-crystals, show inferior catalytic activity compared to the amorphous MoS3 particles

Mediated water electrolysis in biphasic systems

peer-reviewedThe concept of efficient electrolysis by linking photoelectrochemical biphasic H2 evolution and water oxidation processes in the cathodic and anodic compartments of an H-cell, respectively, is introduced. Overpotentials at the cathode and anode are minimised by incorporating light-driven elements into both biphasic reactions. The concepts viability is demonstrated by electrochemical H2 production from water splitting utilising a polarised water-organic interface in the cathodic compartment of a prototype H-cell. At the cathode the reduction of decamethylferrocenium cations ([Cp2*Fe(III)]+) to neutral decamethylferrocene (Cp2*Fe(II)) in 1,2-dichloroethane (DCE) solvent takes place at the solid electrode/oil interface. This electron transfer process induces the ion transfer of a proton across the immiscible water/oil interface to maintain electroneutrality in the oil phase. The oil-solubilised proton immediately reacts with Cp2*Fe(II) to form the corresponding hydride species, [Cp2*Fe(IV)(H)]+. Subsequently, [Cp2*Fe(IV)(H)]+ spontaneously undergoes a chemical reaction in the oil phase to evolve hydrogen gas (H2) and regenerate [Cp2*Fe(III)]+, whereupon this catalytic Electrochemical, Chemical, Chemical (ECC’) cycle is repeated. During biphasic electrolysis, the stability and recyclability of the [Cp2*Fe(III)]+/Cp2*Fe(II) redox couple were confirmed by chronoamperometric measurements and, furthermore, the steady-state concentration of [Cp2*Fe(III)]+ monitored in situ by UV/vis spectroscopy. Post-biphasic electrolysis, the presence of H2 in the headspace of the cathodic compartment was established by sampling with gas chromatography. The rate of the biphasic hydrogen evolution reaction (HER) was enhanced by redox catalysis in the presence of floating catalytic molybdenum carbide (Mo2C) microparticles at the immiscible water/oil interface. The use of a superhydrophobic organic electrolyte salt was critical to ensure proton transfer from water to oil, and not anion transfer from oil to water, in order to maintain electroneutrality after electron transfer. The design, testing and successful optimisation of the operation of the biphasic electrolysis cell under dark conditions with Cp2*Fe(II) lays the foundation for the achievement of photo-induced biphasic water electrolysis at low overpotentials using another metallocene, decamethylrutheneocene (Cp2*Ru(II)). Critically, Cp2*Ru(II) may be recycled at a potential more positive than that of proton reduction in DCE

Revealing and Accelerating Slow Electron Transport in Amorphous Molybdenum Sulphide Particles for Hydrogen Evolution Reaction

Electrochemical impedance spectroscopy is used to identify a slow electron transport process in hydrogen evolution catalysed by amorphous molybdenum sulphides on glassy carbon. A new chemical synthesis leads to an amorphous molybdenum sulfide catalyst with a higher electronic conductivity

Easily-prepared dinickel phosphide (Ni2P) nanoparticles as an efficient and robust electrocatalyst for hydrogen evolution

Polydispersed dinickel phosphide (Ni2P) nanoparticles were synthesized by a simple and scalable solid-state reaction. These nanoparticles are an excellent and robust catalyst for the electrochemical hydrogen evolution reaction, operating in both acidic and basic solutions

Electrochemical reduction of CO2 in organic solvents catalyzed by MoO2

MoO2 microparticles act as an active catalyst for the electrochemical reduction of CO2 in organic solvents such as acetonitrile and dimethylformamide. The catalytic activity and product selectivity depend on temperature and water content of the solvent

Amorphous Molybdenum Sulfide Films as Catalysts for Electrochemical Hydrogen Production in Water

Amorphous molybdenum sulfide films are efficient hydrogen evolution catalysts in water. The films are prepared via simple electro-polymerization procedures and are characterized by XPS, electron microscopy and electronic absorption spectroscopy. Whereas the precatalysts could be MoS3 or MoS2, the active form of the catalysts is identified as amorphous MoS2. Significant geometric current densities are achieved at low overpotentials (e.g., 15 mA cm−2 at η = 200 mV) using these catalysts. The catalysis is compatible with a wide range of pHs (e.g., 0 to 13). The current efficiency for hydrogen production is quantitative. A 40 mV Tafel slope is observed, suggesting a rate-determining ion+atom step. The turnover frequency per active site is calculated. The amorphous molybdenum sulfide films are among the most active non-precious hydrogen evolution catalysts

Fe, Co, and Ni Ions Promote the Catalytic Activity of Amorphous Molybdenum Sulfide Films for Hydrogen Evolution

Molybdenum sulfide materials had been shown as promising non-precious catalysts for hydrogen evolution. This paper describes the study of the promotional effect of certain transition metal ions on the activity of amorphous MoS3 films. Ternary metal sulfide films, M-MoS3 (M = Mn, Fe, Co, Ni, Cu, Zn), have been prepared by cyclic voltammetry of aqueous solutions containing MCl2 and (NH4)2[MoS4]. Whereas the Mn-, Cu-, and Zn-MoS3 films show similar or only slightly higher catalytic activity as the MoS3 film, the Fe-, Co-, and Ni-MoS3 films are significantly more active. The promotional effects of Fe, Co, and Ni ions exist under both acidic and neutral conditions, but the effects are more pronounced under neutral conditions. Up to a 12-fold increase in exchange current density and a 10-fold increase in the current density at an overpotential of 150 mV are observed at pH = 7. It is shown that Fe, Co, and Ni ions promote the growth of the MoS3 films, resulting a high surface area and a higher catalyst loading. These changes are the main contributor to the enhanced activity at pH = 0. However, at pH = 7, Fe, Co, and Ni ions appear to also increase the intrisinc activity of the MoS3 film