261 research outputs found
Analytical method for the determination of trichlorobenzenes in marine biota (poster)
Trichlorobenzenes (TCBs) were intensively used in the last decades as essential components of dielectric fluids, intermediates in chemical synthesis, solvents, coolants, lubricants, heat-transfer medium; insecticide, additive in polyester dyeing and components of termite-control preparations (1, 2). Due to their widespread occurrence in the various environmental compartments they have been classified by OSPARCOM (Oslo and Paris Commissions) (3) as chemicals for priority action and have been proposed by the Marine Chemistry Working Group (MCWG) as chemical parameters in the Water Framework Directive (4). Based on their octanol-water partitioning coefficients (log Kow = 4.02-4.49) (5) and bioconcentration factors in fish (ranging from 182 to 3200, depending on the lipid content) (6), these chemicals are expected to bioaccumulate in aquatic organisms.Against their potential significance in the marine environment there is relatively little information available concerning the actual concentration levels and distribution of trichlorobenzenes in marine organisms (7, 8).The aim of this work was to develop an analytical method appropriate for the determination of TCBs in marine biota.The analytical method consists of saponification of the fish tissue with methanolic potassium hydroxide, liquid-liquid extraction of the solution with pentane, clean up of the concentrated extract on alumina column and analysis of the extract with gas chromatograph equipped with electron capture detector (ECD). The method proved to be appropriate for the detection of concentration levels typical of the organic contaminants in biota (7) (~1 ng /g wet weight of tissue). The relative standard deviation of the analysis of 1,3,5-, 1,2,4- and 1,2,3-trichlorobenzene was 8, 6 and 18% (n=4) respectively. Higher recoveries of the analytes were obtained with spiked fish samples than with standard solutions (88, 96 and 78 instead of 53, 50 and 32% of 1,3,5-, 1,2,4- and 1,2,3-trichlorobenzene respectively). One plausible explanation of the difference is that the proteins and glycerides of the fish tissue compete effectively with trichlorobenzenes for the base and their presence decrease their decomposition rate
Optimization of cylindrical textile organic field effect transistors using TCAD simulation tool
We used a commercial TCAD tool in order to simulate a cylindrical Textile Organic Field Effect Transistor (TOFET) and study the impact of different critical region sizes in its electrical characteristics. The simulation was based on models and parameters similar to those of previous simulations in Organic Thin Film Transistors. We have seen that it is potentially feasible to build transistors which can operate in low voltages by using typical materials. Even if some of the selected typical materials have to be replaced by others more suitable for practical use in the textile industry, the simulation is a good starting point for estimating the device typical operation and parameters. By optimizing critical region sizes of the device we conclude that the device should have an active layer thickness below 100 nm, channel length around 10 mu m and gate oxide thickness as small as possible (300 nm or less), in order to have optimum transistor performance
From the organic thin film transistor to the 3-D textile organic cylindrical transistors - perspectives, expectations and predictions
In this paper we examine the possibility to simulate and study the behaviour of a fiber-based Textile Transistor in a commercial TCAD system. We also examine the capability of such transistors to operate in sufficiently low voltages, aiming to the potential realization of low-voltage wearable textiles in the future. We have seen that it is potentially feasible to build transistors which can operate in low voltages by using typical materials. Even if some of the selected typical materials have to be replaced by others more suitable for practical use in the textile industry, the simulation is a good starting point for estimating the device typical operation and parameters
Biotechnological modification and functionalisation of PET surfaces
Synthetic fibres form an important part of the textile industry, the production of poly(ethylene terephthalate) (PET) alone surpassing that of cotton. A disadvantage of synthetic fibres is their low hydrophilicity. Polyester fibres are particularly hydrophobic. This affects the processability and functionalisation of the fibres. A novel and promising alternative is the use of enzymes in surface modification of synthetic fibres. Synthetic materials have generally been considered resistant to biological degradation; recent developments at different research groups demonstrate that enzymes are very well capable of hydrolysing synthetic materials
Control dependence for extended finite state machines
Though there has been nearly three decades of work on program slicing, there has been comparatively little work on slicing for state machines. One of the primary challenges that currently presents a barrier to wider application of state machine slicing is the problem of determining control dependence. We survey existing related definitions, introducing a new definition that subsumes one and extends another. We illustrate that by using this new definition our slices respect Weiser slicing’s termination behaviour. We prove results that clarify the relationships between our definition and older ones, following this up with examples to motivate the need for these differences
Biotechnological modification of polyester surfaces
Synthetic fibres form an important part of the textile industry, the production of poly(ethylene terephthalate) (PET) alone surpassing that of cotton. A disadvantage of synthetic fibres is their low hydrophilicity. Polyester fibres are particularly hydrophobic. This affects the processability and functionalisation of the fibres. A novel and promising alternative is the use of enzymes in surface modification of synthetic fibres. Synthetic materials have generally been considered resistant to biological degradation; recent developments at different research groups demonstrate that enzymes are very well capable of hydrolysing synthetic materials. Cutinase has been reported to increase hydrophilicity of polyesters by hydrolysis of ester bonds. Hydrolysis of PET by cutinase is via an endo-mechanism, resulting in new carboxyl and hydroxyl groups in the polymer surface. NaOH hydrolysis is via hydrolysis of end groups which results in little or no increase of new carboxyl and hydroxyl groups in the polymer surface. The enzymatic process therefore facilitates functionalisation processes. Enzymes will not penetrate into the material, and therefore not affect the favourable bulk properties contrary to chemical treatments. Manipulation of surface characteristics of textile materials is of fundamental importance in the production of advanced functional textiles. While a lot of research focuses on chemical modification or structuring of the surfaces, the introduction of functionalities using enzymes is a relatively unexplored and modern scientific area. The advantage of biotechnology or more specifically enzymes over other technologies is their high specificity towards a certain reaction or substrate. The general aim of our research is to functionalise (bio)polymeric textile materials using modern biotechnology. Enzymatic surface modification of textile materials involves processing of fibres or (bio)polymers to modify the physical chemical surface properties or the introduction of functional groups on the surface. The research presented focuses on specific enzymatic surface modification of PET to obtain functional structured surfaces. Control of enzymatic action at correct time and length scales is a prerequisite to achieve the desired functionalities. The research will result in new, specific knowledge and technologies to create biotechnologically modified textile materials with unique properties. The research contributes to bio-based economy through the development of novel processes for textiles exhibiting the desired functionalities and through development of novel enzyme technology for structuring and functionalisation of surfaces. Acknowledgements: This work is supported by a grant of the European Commission, FP7, Grant Agreement Number PIEF-GA-2008-219665
Uncomplicated moderate coronary artery dissections after balloon angioplasty: good outcome without stenting
OBJECTIVE: To study the relation between moderate coronary dissections, coronary flow velocity reserve (CFVR), and long term outcome. METHODS: 523 patients undergoing balloon angioplasty and sequential intracoronary Doppler measurements were examined as part of the DEBATE II trial (Doppler endpoints balloon angioplasty trial Europe). After successful balloon angioplasty, patients were randomised to stenting or no further treatment. Dissections were graded at the core laboratory by two observers and divided into four categories: none, mild (type A-B), moderate (type C), severe (types D to F). Patients with severe dissections (n = 128) or without available reference vessel CFVR (n = 139) were excluded. The remaining 256 patients were divided into two groups according to the presence (group A, n = 45) or absence (group B, n = 211) of moderate dissection. RESULTS: Following balloon angioplasty, there was no difference in CFVR between the two groups. At 12 months follow up, a higher rate of major adverse cardiac events was observed overall in group A than in group B (10 (22%) v 23 (11%), p = 0.041). However, the risk of major adverse events was similar in the subgroups receiving balloon angioplasty (group A, 6 (19%) v group B, 16 (16%), NS). Among group A patients, the adverse events risk was greater in those randomised to stenting (odds ratios 6.603 v 1.197, p = 0.046), whereas there was no difference in risk if the group was analysed according to whether the CFVR was /= 2.5 after balloon angioplasty. CONCLUSIONS: Moderate dissections left untreated result in no increased risk of major adverse cardiac events. Additional stenting does not improve the long term outcome
- …