101 research outputs found

    Surveillance et instrumentation des monuments historiques

    Get PDF
    Les sites et monuments historiques, comme tous les ouvrages naturels et humains, évoluent avec le temps du fait de l'action des éléments naturels ou de site. Cela amène donc la collectivité à se poser la question des moyens à mettre en oeuvre pour assurer la pérennité des ouvrages qu'elle souhaite conserver dans son patrimoine et la sécurité des personnes susceptibles de les visiter. En effet le risque principal auquel il faut faire face est celui de la " ruine " du site ou monument. Cette ruine résulte d'une instabilité qui peut brusquement mettre en péril l'édifice et ses visiteurs. La surveillance est le meilleur moyen d'obtenir à la fois un diagnostic juste et précis et de préconiser un traitement adapté au monument et à sa valeur historique. L'auscultation doit toujours être une opération limitée dans le temps et bien ciblée suite à l'analyse du phénomène étudié. En outre la surveillance doit employer des techniques simples et de grande sensibilité

    Comparison of building damage assessment methods for risk analysis in mining subsidence regions

    Get PDF
    The occurrence of subsidence phenomena in urban regions may induce small to severe damage to buildings. Many methods are provided in the literature to assess buildings damage. Most of these methods are empirical and use the horizontal ground strain as a subsidence intensity in the vicinity of a building. Application and comparison of these methods with a case study is the main objective of this paper. This comparison requires some harmonization of the existing methods and the development of a software, which combines the subsidence hazard prediction, the damage evaluation methods and a database of buildings with structural parameters as well as the geographical coordinates of the buildings An additional results is the development of a method for the prediction of the horizontal ground strain in the vicinity of each building. Results are given as a map of damaged buildings for the case study and the different existing methods with some statistical calculations such as the mean and the standard deviation of damage in the city. Comparison of these results allows identification of the ‚Äúsafer‚ÄĚ method that give the higher mean of damage. The comparison of the calculated results and observed damage in Lorrain region show that, the Dzegeniuk et al. methods is more realistic in comparison of the other empirical methods

    Development of building vulnerability functions in subsidence regions from empirical methods

    Get PDF
    The extraction of ores and minerals by underground mining often causes ground subsidence phenomena. In urban regions, these phenomena may induce small to severe damage to buildings. To evaluate this damage, several empirical and analytical methods have been developed in different countries. However, these methods are difficult to use and compare due to differences in the number of criteria used (from 1 to 12). Furthermore, the results provided by damage evaluation may be significantly different from one method to another. The present paper develops vulnerability functions based on a concept that has been applied in other areas, such as earthquake engineering, and that appears to be a more efficient way to assess building vulnerability in undermined cities. A methodology is described for calculating vulnerability functions in subsidence zones using empirical methods. The first part of the paper focuses on existing empirical methods for damage evaluation, and selected necessary improvements or modifications are justified. The second part focuses on the development of a building typology in subsidence zones and its application in the Lorraine region, where many villages are subject to subsidence problems due to iron-ore mining. The third section describes and discusses the adopted methodology for determining vulnerability and fragility functions or curves. Finally, vulnerability functions are tested and validated with a set of three subsidences that occurred in Lorraine between 1996 and 1999

    Vulnerability assessment for mining subsidence hazard

    Get PDF
    International audienceAfter the last mining subsidence events, which occurred in the iron-ore field in Lorraine (France) in 1996, 1997 and 1999, and because of the thousand hectares of undermined areas, the assessment of vulnerability of buildings and territories became necessary for risk management. The ten last years highlight evolutions of the vulnerability concept and its assessment method between the first risk management decisions and current risk assessment. These evolutions reveal a lot about the complexity of the vulnerability concept and about difficulties to develop simple and relevant methods for its assessment. The objective of this paper is to present this evolution and to suggest different improvements compared to other concepts and methods developed in other countries (USA, Poland...) and for other hazards (flood, industrial...). These improvements take into account more various kinds of elements in the vulnerability meaning (buildings, people, roads, public facilities and public functions) as well as they deal with method of assessment in relation to the subsidence intensity and vulnerable elements.Depuis les affaissements miniers survenus en Lorraine en 1996, 1997 et 1999, et en raison des milliers d'hectars sous-min√©s, l'√©valuation de la vuln√©rabilit√© des habitations et des territoires est devenu une n√©cessit√© pour permettre une meilleure pr√©vention des risques. Les dix ann√©es √©coul√©es depuis les premi√®res d√©cisions prises en r√©action au risque d'affaissement minier montrent une √©volution importante des m√©thodes employ√©es. Ces √©volutions sont r√©v√©latrices de la complexit√© du concept de vuln√©rabilit√© et de la difficult√© √† trouver des m√©thodes pertinentes et op√©rationnelles pour l'√©valuer. Cet article a pour objectif de pr√©senter cette √©volution et de donner des perspectives d'am√©lioration au vu des m√©thodes employ√©es dans d'autres pays (Etats-unis, Pologne) et vis-√†-vis d'autres al√©as (sismique, inondation, accidents industriels). Ces perspectives portent sur les diff√©rents enjeux qui contribuent √† la vuln√©rabilit√© (personnes, b√Ętiments, infrastructures, √©quipements publics...) et sur les m√©thodes de caract√©risation de la vuln√©rabilit√© en fonction des enjeux et de l'intensit√© de l'affaissement

    An extension of analytical methods for building damage evaluation in subsidence regions to anisotropic beams

    Get PDF
    Ore and mineral extraction by underground mining often causes ground subsidence phenomena, and may induce severe damage to buildings. Analytical methods based on the Timoshenko beam theory is widely used to assess building damage in subsidence regions. These methods are used to develop abacus that allow the damage assessment in relation to the ground curvature and the horizontal ground strain transmitted to the building. These abacuses are actually developed for building with equivalent length and height and they suppose that buildings can be modelled by a beam with isotropic properties while many authors suggest that anisotropic properties should be more representative. This paper gives an extension of analytical methods to transversely anisotropic beams. Results are first validated with finite elements methods models. Then 72 abacuses are developed for a large set of geometries and mechanical properties

    Modelling uncertainties in pillar stability analysis

    Get PDF
    International audienceMany countries are now facing problems related to their past mining activities. One of the greatest problems they have to deal with concerns the potential surface instability. In areas where a bord-and-pillar extraction method was used, deterministic methodologies are generally used to assess the risk of surface collapses. However those methodologies suffer from not being able to take into account all the uncertainties existing in any risk analysis. Through the practical example of the assessment of a single pillar stability in a very simple mining layout, this paper introduces a logical framework that can be used to incorporate the different kinds of uncertainties related to data, models as well as to specific expert's choices in the risk analysis process. Practical recommendations and efficient tools are also provided to help engineers and experts in their daily work.De nombreux pays se trouvent aujourd'hui confrontés à des problèmes liés à leur histoire minière passée, et notamment à celui de l'instabilité des terrains de surface. Des méthodes déterministes sont généralement utilisées dans les zones anciennement exploitées par la méthode des chambres et piliers, pour évaluer le risque d'effondrement de surface. Cependant, ces méthodes ne permettent pas de prendre en compte les différentes incertitudes qui existent dans toute analyse de risque. Cette étude, à travers l'exemple du calcul de stabilité d'un pilier de mine extrait d'un environnement très simple, présente une démarche logique pouvant être utilisée pour incorporer les incertitudes, liées aux données aussi bien qu'aux modèles ou aux choix spécifiques des experts, dans les processus d'analyse de risque. Des recommandations pratiques et des outils efficaces pouvant permettre d'aider les ingénieurs et les experts dans leur travail de tous les jours sont également présentés

    Development of building vulnerability functions in subsidence regions from analytical methods

    Get PDF
    Ore and mineral extraction by underground mining often causes ground subsidence phenomena, and may induce severe damage to buildings. This paper develops vulnerability and fragility functions to assess building damage in the context of mining subsidence hazards, comparable to functions used for other hazards. These functions are based on existing analytical methods for damage assessment. They take into account both the uncertainty of the geometric and mechanical parameters of the building and the soil‚Äďstructure interaction phenomena that may have a critical influence on the building loading. The present paper discusses the methodology used to determine these functions, and the analytical method for damage evaluation is described. The second part is a detailed application of the methodology for a masonry building with or without reinforcement, for which both vulnerability and fragility functions are calculated. Finally, vulnerability functions are tested and validated with a set of three subsidences that occurred in Lorraine (France) between 1996 and 1999

    Fuzzy Reasoning for the analysis of risks in geotechnical engineering Application to a French Case

    Get PDF
    The analysis of risks induced by unstable cliffs is one of the major and important tasks in geotechnieal engineering, This analysis should take into account the fact that some engineering parameters that are necessary for any risk analysts around unstable eliffs are difficult to be quantified and/or they are vague and imprecise. That is why such risk analysis should depend meagerly on the experience of the geotechnical engineer in charge for measurements

    Computer Simulation and Risk Analysis around Abandoned Underground Excavations Application to a French Case

    Get PDF
    International audienceThe Analysis of risks induced by Underground opening or unstable eliffs is one of the major and important tasks in earth science engineering. This analysis should take into account the effect of randomness, it should account also for the probability distributions of different parameters, and above all, the experience of the geotechnical engmeer
    • ‚Ķ
    corecore