15,302 research outputs found
Environmental test chamber for the support of learning and teaching in intelligent control
The paper describes the utility of a low cost, 1 m2 by 2 m forced ventilation, micro-climate test chamber, for the support of research and teaching in mechatronics. Initially developed for the evaluation of a new ventilation rate controller, the fully instrumented chamber now provides numerous learning opportunities and individual projects for both undergraduate and postgraduate research students
Multivariable proportional-integral-plus (PIP) control of the ALSTOM nonlinear gasifier simulation
Multivariable proportional-integral-plus (PIP) control methods are applied to the nonlinear ALSTOM Benchmark Challenge II. The approach utilises a data-based combined model reduction and linearisation step, which plays an essential role in satisfying the design specifications. The discrete-time transfer function models obtained in this manner are represented in a non-minimum state space form suitable for PIP control system design. Here, full state variable feedback control can be implemented directly from the measured input and output signals of the controlled process, without resorting to the design and implementation of a deterministic state reconstructor or a stochastic Kalman filter. Furthermore, the non-minimal formulation provides more design freedom than the equivalent minimal case, a characteristic that proves particularly useful in tuning the algorithm to meet the Benchmark specifications. The latter requirements are comfortably met for all three operating conditions by using a straightforward to implement, fixed gain, linear PIP algorithm
Multidisciplinary Expert-aided Analysis and Design (MEAD)
The MEAD Computer Program (MCP) is being developed under the Multidisciplinary Expert-Aided Analysis and Design (MEAD) Project as a CAD environment in which integrated flight, propulsion, and structural control systems can be designed and analyzed. The MCP has several embedded computer-aided control engineering (CACE) packages, a user interface (UI), a supervisor, a data-base manager (DBM), and an expert system (ES). The supervisor monitors and coordinates the operation of the CACE packages, the DBM; the ES, and the UI. The DBM tracks the control design process. Models created or installed by the MCP are tracked by date and version, and results are associated with the specific model version with which they were generated. The ES is used to relieve the control engineer from tedious and cumbersome tasks in the iterative design process. The UI provides the capability for a novice as well as an expert to utilize the MCP easily and effectively. The MCP version 2(MCP-2.0) is fully developed for flight control system design and analysis. Propulsion system modeling, analysis, and simulation is also supported; the same is true for structural models represented in state-space form. The ultimate goal is to cover the integration of flight, propulsion, and structural control engineering, including all discipline-specific functionality and interfaces. The current MCP-2.0 components and functionality are discussed
System identification, time series analysis and forecasting:The Captain Toolbox handbook.
CAPTAIN is a MATLAB compatible toolbox for non stationary time series analysis, system identification, signal processing and forecasting, using unobserved components models, time variable parameter models, state dependent parameter models and multiple input transfer function models. CAPTAIN also includes functions for true digital control
Proportional-Integral-Plus Control Strategy of an Intelligent Excavator
This article considers the application of Proportional-Integral-Plus (PIP) control to the Lancaster University Computerised Intelligent Excavator (LUCIE), which is being developed to dig foundation trenches on a building site. Previous work using LUCIE was based on the ubiquitous PI/PID control algorithm, tuned on-line, and implemented in a rather ad hoc manner. By contrast, the present research utilizes new hardware and advanced model-based control system design methods to improve the joint control and so provide smoother, more accurate movement of the excavator arm. In this article, a novel nonlinear simulation model of the system is developed for MATLAB/SIMULINK, allowing for straightforward refinement of the control algorithm and initial evaluation. The PIP controller is compared with a conventionally tuned PID algorithm, with the final designs implemented on-line for the control of dipper angle. The simulated responses and preliminary implementation results demonstrate the feasibility of the approach
Controllable forms for stabilising pole assignment design of generalised bilinear systems
Bilinear structures are able to represent nonlinear phenomena more accurately than linear models, and thereby help to extend the range of satisfactory control performance. However, closed loop characteristics are typically designed by simulation and stability is not guaranteed. In this reported work, it is shown how bilinear systems are a special case of the more general state dependent parameter (SDP) model, which can subsequently be utilised to design stabilising feedback controllers using a special form of nonlinear pole assignment. To establish the link, however, an important generalisation of the SDP pole assignment method is developed
Nonminimal state space approach to multivariable ramp metering control of motorway bottlenecks
The paper discusses the automatic control of motorway traffic flows utilising ramp metering, i.e. traffic lights on the on-ramp entrances. A multivariable ramp metering system is developed, based on the nonminimal state space (NMSS) approach to control system design using adaptive proportional-integral-plus, linear quadratic (PIPâLQ) optimal controllers. The controller is evaluated on a nonlinear statistical traffic model (STM) simulation of the Amsterdam motorway ring road near the Coen Tunnel
Proportional-integral-plus (PIP) control of the ALSTOM gasifier problem
Although it is able to exploit the full power of optimal state variable feedback within a non-minimum state-space (NMSS) setting, the proportional-integral-plus (PIP) controller is simple to implement and provides a logical extension of conventional proportional-integral and proportional-integral-derivative (PI/PID) controllers, with additional dynamic feedback and input compensators introduced automatically by the NMSS formulation of the problem when the process is of greater than first order or has appreciable pure time delays. The present paper applies the PIP methodology to the ALSTOM benchmark challenge, which takes the form of a highly coupled multi-variable linear model, representing the gasifier system of an integrated gasification combined cycle (IGCC) power plant. In particular, a straightforwardly tuned discrete-time PIP control system based on a reduced-order backward-shift model of the gasifier is found to yield good control of the benchmark, meeting most of the specified performance requirements at three different operating points
Proportional-integral-plus control applications of state-dependent parameter models
This paper considers proportional-integral-plus (PIP) control of non-linear systems defined by state-dependent parameter models, with particular emphasis on three practical demonstrators: a microclimate test chamber, a 1/5th-scale laboratory representation of an intelligent excavator, and a full-scale (commercial) vibrolance system used for ground improvement on a construction site. In each case, the system is represented using a quasi-linear state-dependent parameter (SDP) model structure, in which the parameters are functionally dependent on other variables in the system. The approach yields novel SDP-PIP control algorithms with improved performance and robustness in comparison with conventional linear PIP control. In particular, the new approach better handles the large disturbances and other non-linearities typical in the application areas considered
PMOS Standard Cell Library
To allow for a quicker, more efficient design process, a PMOS standard cell library has been designed. The cells designed include; NAND, AND, OR, NOR and Exclusive OR gates, Output Pad Driver, RS Flip-Flop, D-type Flip-Flop, Shift Register, Up-Down Counter, Multiplexor, Decoder, Encoder, Inverter, and a Serial Adder. These cells were all simulated using SPICE, and laid out with ten micron metal gate PMOS design rules
- âŠ