3,327 research outputs found
Distinguishing RBL-like objects and XBL-like objects with the peak emission frequency of the overall energy spectrum
We investigate quantitatively how the peak emission frequency of the overall
energy spectrum is at work in distinguishing RBL-like and XBL-like objects. We
employ the sample of Giommi et al. (1995) to study the distribution of BL
Lacertae objects with various locations of the cutoff of the overall energy
spectrum. We find that the sources with the cutoff located at lower frequency
are indeed sited in the RBL region of the plane,
while those with the cutoff located at higher frequency are distributed in the
XBL region. For a more quantitative study, we employ the BL Lacertae samples
presented by Sambruna et al. (1996), where, the peak emission frequency, , of each source is estimated by fitting the data with a parabolic function.
In the plot of we find that, in the four different
regions divided by the line and the line,
all the RBL-like objects are inside the upper left region, while most XBL-like
objects are within the lower right region. A few sources are located in the
lower left region. No sources are in the upper right region. This result is
rather quantitative. It provides an evidence supporting what Giommi et al.
(1995) suggested: RBL-like and XBL-like objects can be distinguished by the
difference of the peak emission frequency of the overall energy spectrum.Comment: 7 pages, 2 figure
Distribution of power requirements during yarn winding in ring spinning
A model of a yam package is established for a ring spinning system. The yarn layer, surface area, and mass of the yam package are formulated with respect to the diameters of the empty bobbin and full yarn package, yarn count, and yarn winding-on time. Based on the principles of dynamics and aerodynamics, models of the power requirements for overcoming the skin friction drag, increasing the kinetic energy of the yarn package (bobbin and wound yarn), and overcoming the yarn wind-on tension are developed. The skin friction coefficient on the surface of a rotating yam package is obtained from experiment. The power distribution during yam packaging is discussed based on a case study. The results indicate that overcoming the skin friction drag during yarn winding consumes the largest amount of energy. The energy required to overcome the yarn wind-on tension is also significant
Recent studies on yarn tension and energy consumption in ring spinning
High energy consumption remains a key challenge for the widely used ring spinning system. Tackling this challenge requires a full understanding of the various factors that contribute to yarn tension and energy consumption during ring spinning. In this paper, we report our recent experimental and theoretical research on air drag, yarn tension and energy consumption in ring spinning. A specially constructed rig was used to simulate the ring spinning process; and yarn tension at the guide-eye was measured for different yarns under different conditions. The effect of yarn hairiness on the air drag acting on a rotating yarn package and on a ballooning yarn was examined. Models of the power requirements for overcoming the air drag, increasing the kinetic energy of the yarn package (bobbin and wound yarn) and overcoming the yarn wind-on tension were developed. The ratio of energy-consumption to yarn-production over a full yarn package was discussed. A program to simulate yarn winding in ring spinning was implemented, which can generate the balloon shape and predict yarn tension under a given spinning condition. The simulation results were verified with experimental results obtained from spinning cotton and wool yarns.<br /
Aeroacoustic noise reduction design of a landing gear structure based on wind tunnel experiment and simulation
In the process of aircraft landing, the aerodynamic noise of the landing gear constitutes an appreciable part of the airframe noise. Therefore it is important to dedicate research efforts to study of aerodynamic noise of landing gear and its structural parts. Acoustic wind tunnel test on landing gear is designed to measure aerodynamic noise of structural parts of landing gear such as pillar and torque arm. Aerodynamic noise spectrum characteristic and radiation directive characteristic of structural parts in different velocities are established. The effect of flow velocity to noise is analyzed. Two noise reduction designs are proposed in the paper. The effect of the relative position of pillar and torque arm to structural noise is considered based on simulations and testing. Simulation method to assess the noise reduction effect of torque arm shape modification is adopted. The results demonstrate that structural noise can be appreciably reduced by placing torque arm behind the pillar as well as by modifying the shape of the torque arm. In total, the study holds reference value to the ongoing research activities on aerodynamic noise of landing gear and design method for low noise operation of the gear
Skin friction coefficient on a yarn package surface in ring spinning
The skin friction coefficient on the surface of a rotating yarn package affects the power required to drive the package. This paper examines the relationship between the skin friction coefficient on the package surface and its diameter and rotating speed, based on the fundamentals of aerodynamics and the experimental results of power consumption. Skin friction coefficients on the surfaces of an airplane, car top, and yarn package are discussed. The results indicate that the skin friction coefficient on the package surface without hairiness depends on the package diameter and spindle speed only. The skin friction coefficient on the yarn package surface is about three times that on the top surface of a car, and is about twenty times that on an airplane surface. The power consumed to overcome skin friction drag is more than that consumed to drive the spindle if the spindle speed is very slow. However, the situation reverses when the spindle speed is fast
An investigation of yarn snarling and balloon flutter instabilities in ring spinning
This article reports theoretical and experimental investigation on yarn snarling and balloon fluttering in ring spinning. Yarn snarling and balloon fluttering affect yarn breakage in ring spinning. The theoretical model has incorporated the tangential component of air drag on a ballooning yarn, which was ignored in previous models. The results show that yarn snarling happens in the balloon when the ratio of yarn length in the balloon to balloon height is greater than a specific value that depends on the yarn type and count. Yarn tension experiences an obvious change before and after yarn snarling. The balloon flutter appears between normal balloons while the balloon loops are changing. Fluttering balloon shapes that oscillate periodically between two and three loop configurations as yarn tension varies periodically have also been observed experimentally. <br /
- …