The Dynamics of Liquid Drops Coalescing in the Inertial Regime

We examine the dynamics of two coalescing liquid drops in the `inertial regime', where the effects of viscosity are negligible and the propagation of the bridge front connecting the drops can be considered as `local'. The solution fully computed in the framework of classical fluid-mechanics allows this regime to be identified and the accuracy of the approximating scaling laws proposed to describe the propagation of the bridge to be established. It is shown that the scaling law known for this regime has a very limited region of accuracy and, as a result, in describing experimental data it has frequently been applied outside its limits of applicability. The origin of the scaling law's shortcoming appears to be the fact that it accounts for the capillary pressure due only to the longitudinal curvature of the free surface as the driving force for the process. To address this deficiency, the scaling law is extended to account for both the longitudinal and azimuthal curvatures at the bridge front which, fortuitously, still results in an explicit analytic expression for the front's propagation speed. This new expression is then shown to offer an excellent approximation for both the fully-computed solution and for experimental data from a range of flow configurations for a remarkably large proportion of the coalescence process. The derived formula allows one to predict the speed at which drops coalesce for the duration of the inertial regime which should be useful for the analysis of experimental data.Comment: Accepted for publication in Physical Review

The Formation of a Bubble from a Submerged Orifice

The formation of a single bubble from an orifice in a solid surface, submerged in an in- compressible, viscous Newtonian liquid, is simulated. The finite element method is used to capture the multiscale physics associated with the problem and to track the evolution of the free surface explicitly. The results are compared to a recent experimental analysis and then used to obtain the global characteristics of the process, the formation time and volume of the bubble, for a range of orifice radii; Ohnesorge numbers, which combine the material parameters of the liquid; and volumetric gas flow rates. These benchmark calculations, for the parameter space of interest, are then utilised to validate a selection of scaling laws found in the literature for two regimes of bubble formation, the regimes of low and high gas flow rates.Comment: Accepted for publication in the European Journal of Mechanics B/Fluid

Anomalous dynamics of capillary rise in porous media

The anomalous dynamics of capillary rise in a porous medium discovered experimentally more than a decade ago [T. Delker et al., Phys. Rev. Lett. 76, 2902 (1996)] is described. The developed theory is based on considering the principal modes of motion of the menisci that collectively form the wetting front on the Darcy scale. These modes, which include (i) dynamic wetting mode, (ii) threshold mode, and (iii) interface depinning process, are incorporated into the boundary conditions for the bulk equations formulated in the regular framework of continuum mechanics of porous media, thus allowing one to consider a general case of three-dimensional flows. The developed theory makes it possible to describe all regimes observed in the experiment, with the time spanning more than four orders of magnitude, and highlights the dominant physical mechanisms at different stages of the process

Moving contact lines and dynamic contact angles: a ‘litmus test’ for mathematical models, accomplishments and new challenges

AbstractAfter a brief overview of the ‘moving contact-line problem’ as it emerged and evolved as a research topic, a ‘litmus test’ allowing one to assess adequacy of the mathematical models proposed as solutions to the problem is described. Its essence is in comparing the contact angle, an element inherent in every model, with what follows from a qualitative analysis of some simple flows. It is shown that, contrary to a widely held view, the dynamic contact angle is not a function of the contact-line speed as for different spontaneous spreading flows one has different paths in the contact angle-versus-speed plane. In particular, the dynamic contact angle can decrease as the contact-line speed increases. This completely undermines the search for the ‘right’ velocity-dependence of the dynamic contact angle, actual or apparent, as a direction of research. With a reference to an earlier publication, it is shown that, to date, the only mathematical model passing the ‘litmus test’ is the model of dynamic wetting as an interface formation process. The model, which was originated back in 1993, inscribes dynamic wetting into the general physical context as a particular case in a wide class of flows, which also includes coalescence, capillary breakup, free-surface cusping and some other flows, all sharing the same underlying physics. New challenges in the field of dynamic wetting are discussed.</jats:p

A unified activities-based approach to the modelling of viral epidemics and COVID-19 as an illustrative example

AbstractA new approach to formulating mathematical models of increasing complexity to describe the dynamics of viral epidemics is proposed. The approach utilizes a map of social interactions characterizing the population and its activities and, unifying the compartmental and the stochastic viewpoints, offers a framework for incorporating both the patterns of behaviour studied by sociological surveys and the clinical picture of a particular infection, both for the virus itself and the complications it causes. The approach is illustrated by taking a simple mathematical model developed in its framework and applying it to the ongoing pandemic of SARS-CoV-2 (COVID-19), with the UK as a representative country, to assess the impact of the measures of social distancing imposed to control its course.</jats:p