649 research outputs found

    Mechanical behaviour of high toughness steels in extreme environments : influence of hydrogen and low temperature

    Get PDF
    In presenza di H2S e CO2, materiali metallici, come acciai al carbonio e basso legati, spesso usati nella costruzione di pipeline, possono essere soggetti a danneggiamenti e infragilimenti da idrogeno. I più recenti impianti Oil&Gas spesso lavorano in condizioni estreme (condizioni “sour” e basse temperature) In questo lavoro vengono analizzati gli effetti dell’idrogeno e della bassa temperatura sul comportamento meccanico di due acciai per pipeline, il microlegato X65 e il basso legato F22. In particolare è stato esaminato come le proprietà meccaniche di questi due acciai dipendono e sono influenzate da un effetto combinato causato dalla presenza di idrogeno e bassa temperatura. Molte prove meccaniche sono state svolte in laboratorio simulando le effettive condizioni in cui questi acciai lavorano. I provini sono stati ricavati dai tubi e alcuni sono stati caricati di idrogeno tramite un innovativo metodo elettrochimico. Questa nuova tecnica di carica non pericolosa è stata sviluppata al dipartimento di Chimica, Materiali e Ingegneria Chimica CMIC “Giulio Natta” del Politecnico di Milano, per introdurre nel reticolo del materiale idrogeno atomico. Il contenuto di idrogeno diffusibile a circa 180°C presente nei provini è compreso tra 0.6 e 2ppm. Prove di impatto, tenacità e propagazione a fatica sono state svolte su provini caricati e non caricati variando la temperature di prova e, per i test di fatica, anche la frequenza di applicazione del carico. I risultati sperimentali mostrano un evidente effetto dovuto alla presenza di idrogeno specialmente nelle prove a lenta applicazione del carico. Il rateo di diffusione dell’idrogeno nella struttura dell’acciaio sembra essere il parametro più importante per spiegare l’influenza della temperatura riguardo al processo di infragilimento. Le osservazioni frattografiche forniscono interessanti dettagli per lo studio del fenomeno e confermano i risultati dei test meccanici. È stato sviluppato un modello di sovrapposizione capace di prevedere la propagazione in relazione a parametri di prova come: temperatura, frequenza, presenza di idrogeno e ΔK. Per mezzo di poche prove, svolte fissando temperatura e frequenza, è possibile stimare il comportamento del materiale per differenti condizioni di test. Il modello viene utilizzato per la valutazione di situazioni critiche in differenti condizioni.In presence of H2S and CO2, metallic materials, such as carbon and low alloy steels often used in pipelines, may be subjected to hydrogen damage and embrittlement. The most recent Oil and Gas plants often work in extreme conditions (sour condition and very low temperature). In this work hydrogen and low temperature effects, on mechanical behaviour of two pipeline steels, X65 microalloyed and F22 low alloy steels, are examined. In particular, it has been investigated how mechanical properties of these two steels depend and are affected by a combined effect induced by hydrogen and low temperature presence. A large number of mechanical tests have been performed in laboratory simulating real conditions in which these steels work. The specimens were cut from pipes and a part of them was hydrogen charged by a new electrochemical method. This new non-hazardous charging technique, was developed at the Chemistry, Material and Chemical Engineering Department CMIC “Giulio Natta” of the Politecnico di Milano, in order to introduce, in the material lattice, atomic hydrogen. Diffusible hydrogen content in specimens at about 180°C is in the range 0.6 to 2ppm. Impact, toughness and fatigue crack propagation tests were carried out on charged and uncharged specimens, by varying the test temperature and, for fatigue crack growth tests, also the load frequency. The experimental results show evident effects due to the hydrogen presence especially in slow load tests. The hydrogen diffusion rate in the steels structure seems to be the most important parameter in order to explain the temperature influence on the embrittlement process. Fracture surface examinations provide interesting details to study the phenomenon and confirms the mechanical testing results. A superposition model, able to predict the crack growth rate versus test parameters such as: temperature, frequency, presence of hydrogen and ΔK has been developed. By means of few tests, performed by fixing temperature and frequency, it is possible to estimate the material behaviour for different test conditions. The model is used for the evaluation of critical situations in different conditions.DIPARTIMENTO DI MECCANICA24GUAGLIANO, MARIOCOLOSIMO, BIANCA MARI

    Study of the BΛc+ΛˉcKB^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-} decay

    Full text link
    The decay BΛc+ΛˉcKB^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-} is studied in proton-proton collisions at a center-of-mass energy of s=13\sqrt{s}=13 TeV using data corresponding to an integrated luminosity of 5 fb1\mathrm{fb}^{-1} collected by the LHCb experiment. In the Λc+K\Lambda_{c}^+ K^{-} system, the Ξc(2930)0\Xi_{c}(2930)^{0} state observed at the BaBar and Belle experiments is resolved into two narrower states, Ξc(2923)0\Xi_{c}(2923)^{0} and Ξc(2939)0\Xi_{c}(2939)^{0}, whose masses and widths are measured to be m(Ξc(2923)0)=2924.5±0.4±1.1MeV,m(Ξc(2939)0)=2938.5±0.9±2.3MeV,Γ(Ξc(2923)0)=0004.8±0.9±1.5MeV,Γ(Ξc(2939)0)=0011.0±1.9±7.5MeV, m(\Xi_{c}(2923)^{0}) = 2924.5 \pm 0.4 \pm 1.1 \,\mathrm{MeV}, \\ m(\Xi_{c}(2939)^{0}) = 2938.5 \pm 0.9 \pm 2.3 \,\mathrm{MeV}, \\ \Gamma(\Xi_{c}(2923)^{0}) = \phantom{000}4.8 \pm 0.9 \pm 1.5 \,\mathrm{MeV},\\ \Gamma(\Xi_{c}(2939)^{0}) = \phantom{00}11.0 \pm 1.9 \pm 7.5 \,\mathrm{MeV}, where the first uncertainties are statistical and the second systematic. The results are consistent with a previous LHCb measurement using a prompt Λc+K\Lambda_{c}^{+} K^{-} sample. Evidence of a new Ξc(2880)0\Xi_{c}(2880)^{0} state is found with a local significance of 3.8σ3.8\,\sigma, whose mass and width are measured to be 2881.8±3.1±8.5MeV2881.8 \pm 3.1 \pm 8.5\,\mathrm{MeV} and 12.4±5.3±5.8MeV12.4 \pm 5.3 \pm 5.8 \,\mathrm{MeV}, respectively. In addition, evidence of a new decay mode Ξc(2790)0Λc+K\Xi_{c}(2790)^{0} \to \Lambda_{c}^{+} K^{-} is found with a significance of 3.7σ3.7\,\sigma. The relative branching fraction of BΛc+ΛˉcKB^{-} \to \Lambda_{c}^{+} \bar{\Lambda}_{c}^{-} K^{-} with respect to the BD+DKB^{-} \to D^{+} D^{-} K^{-} decay is measured to be 2.36±0.11±0.22±0.252.36 \pm 0.11 \pm 0.22 \pm 0.25, where the first uncertainty is statistical, the second systematic and the third originates from the branching fractions of charm hadron decays.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-028.html (LHCb public pages

    Multidifferential study of identified charged hadron distributions in ZZ-tagged jets in proton-proton collisions at s=\sqrt{s}=13 TeV

    Full text link
    Jet fragmentation functions are measured for the first time in proton-proton collisions for charged pions, kaons, and protons within jets recoiling against a ZZ boson. The charged-hadron distributions are studied longitudinally and transversely to the jet direction for jets with transverse momentum 20 <pT<100< p_{\textrm{T}} < 100 GeV and in the pseudorapidity range 2.5<η<42.5 < \eta < 4. The data sample was collected with the LHCb experiment at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 1.64 fb1^{-1}. Triple differential distributions as a function of the hadron longitudinal momentum fraction, hadron transverse momentum, and jet transverse momentum are also measured for the first time. This helps constrain transverse-momentum-dependent fragmentation functions. Differences in the shapes and magnitudes of the measured distributions for the different hadron species provide insights into the hadronization process for jets predominantly initiated by light quarks.Comment: All figures and tables, along with machine-readable versions and any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-013.html (LHCb public pages

    Measurement of the ratios of branching fractions R(D)\mathcal{R}(D^{*}) and R(D0)\mathcal{R}(D^{0})

    Full text link
    The ratios of branching fractions R(D)B(BˉDτνˉτ)/B(BˉDμνˉμ)\mathcal{R}(D^{*})\equiv\mathcal{B}(\bar{B}\to D^{*}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(\bar{B}\to D^{*}\mu^{-}\bar{\nu}_{\mu}) and R(D0)B(BD0τνˉτ)/B(BD0μνˉμ)\mathcal{R}(D^{0})\equiv\mathcal{B}(B^{-}\to D^{0}\tau^{-}\bar{\nu}_{\tau})/\mathcal{B}(B^{-}\to D^{0}\mu^{-}\bar{\nu}_{\mu}) are measured, assuming isospin symmetry, using a sample of proton-proton collision data corresponding to 3.0 fb1{ }^{-1} of integrated luminosity recorded by the LHCb experiment during 2011 and 2012. The tau lepton is identified in the decay mode τμντνˉμ\tau^{-}\to\mu^{-}\nu_{\tau}\bar{\nu}_{\mu}. The measured values are R(D)=0.281±0.018±0.024\mathcal{R}(D^{*})=0.281\pm0.018\pm0.024 and R(D0)=0.441±0.060±0.066\mathcal{R}(D^{0})=0.441\pm0.060\pm0.066, where the first uncertainty is statistical and the second is systematic. The correlation between these measurements is ρ=0.43\rho=-0.43. Results are consistent with the current average of these quantities and are at a combined 1.9 standard deviations from the predictions based on lepton flavor universality in the Standard Model.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://cern.ch/lhcbproject/Publications/p/LHCb-PAPER-2022-039.html (LHCb public pages

    A MODEL TO PREDICT THE CRACK GROWTH RATE IN HYDROGEN ENVINROMENT

    No full text
    In this paper, the attention is focussed on the mechanical fatigue behaviour of high-strength steels subjected to hydrogen embrittlement. An analytical model is introduced to interpolate experimental fatigue results, from tests carried out on hydrogen charged and not charged specimens, varying temperature and frequency. The aim is to find an useful tool able to describe the fatigue behaviour of the metals and to understand the crack growth mechanisms under these different test and environmental conditions. Good agreement is found between the estimations of the model and the experimental data: in this light, an application to a real case is proposed, to evaluate the residual fatigue life of the cracked pipe in presence or not of a corrosive environment

    The LHCb Upgrade I

    No full text

    Measurement of CP asymmetries in D(s)+ηπ+ {D}_{(s)}^{+}\to \eta {\pi}^{+} and D(s)+ηπ+ {D}_{(s)}^{+}\to {\eta}^{\prime }{\pi}^{+} decays

    No full text
    Searches for CP violation in the decays D(s)+ηπ+ {D}_{(s)}^{+}\to \eta {\pi}^{+} and D(s)+ηπ+ {D}_{(s)}^{+}\to {\eta}^{\prime }{\pi}^{+} are performed using pp collision data corresponding to 6 fb1^{−1} of integrated luminosity collected by the LHCb experiment. The calibration channels D(s)+ϕπ+ {D}_{(s)}^{+}\to \phi {\pi}^{+} are used to remove production and detection asymmetries. The resulting CP-violating asymmetries areACP=(D+ηπ+)=(0.34±0.66±0.16±0.05)%,ACP=(Ds+ηπ+)=(0.32±0.51±0.12)%,ACP=(D+ηπ+)=(0.49±0.18±0.06±0.05)%,ACP=(Ds+ηπ+)=(0.01±0.12±0.08)%, {\displaystyle \begin{array}{l}{\mathcal{A}}^{CP}=\left({D}^{+}\to \eta {\pi}^{+}\right)=\left(0.34\pm 0.66\pm 0.16\pm 0.05\right)\%,\\ {}{\mathcal{A}}^{CP}=\left({D}_s^{+}\to \eta {\pi}^{+}\right)=\left(0.32\pm 0.51\pm 0.12\right)\%,\\ {}\begin{array}{l}{\mathcal{A}}^{CP}=\left({D}^{+}\to {\eta}^{\prime }{\pi}^{+}\right)=\left(0.49\pm 0.18\pm 0.06\pm 0.05\right)\%,\\ {}{\mathcal{A}}^{CP}=\left({D}_s^{+}\to {\eta}^{\prime }{\pi}^{+}\right)=\left(0.01\pm 0.12\pm 0.08\right)\%,\end{array}\end{array}} where the first uncertainty is statistical, the second is systematic and the third, relevant for the D+^{+} channels, is due to the uncertainty on ACP=(D+ϕπ+) {\mathcal{A}}^{CP}=\left({D}^{+}\to \phi {\pi}^{+}\right) . These measurements, currently the most precise for three of the four channels considered, are consistent with the absence of CP violation. A combination of these results with previous LHCb measurements is presented.[graphic not available: see fulltext]Searches for CPCP violation in the decays D(s)+ηπ+D^+_{(s)}\rightarrow \eta \pi^+ and D(s)+ηπ+D^+_{(s)}\rightarrow \eta^{\prime} \pi^+ are performed using pppp collision data corresponding to 6 fb1^{-1} of integrated luminosity collected by the LHCb experiment. The calibration channels D(s)+ϕπ+D^+_{(s)}\rightarrow \phi \pi^+ are used to remove production and detection asymmetries. The resulting CPCP-violating asymmetries are ACP(D+ηπ+)=(0.34±0.66±0.16±0.05)%A^{CP}(D^+ \rightarrow \eta \pi^+) = (0.34 \pm 0.66 \pm 0.16 \pm 0.05)\%, ACP(Ds+ηπ+)=(0.32±0.51±0.12)%A^{CP}(D^+_s \rightarrow \eta \pi^+) = (0.32 \pm 0.51 \pm 0.12)\%, ACP(D+ηπ+)=(0.49±0.18±0.06±0.05)%A^{CP}(D^+ \rightarrow \eta^{\prime} \pi^+) = (0.49 \pm 0.18 \pm 0.06 \pm 0.05)\%, ACP(Ds+ηπ+)=(0.01±0.12±0.08)%A^{CP}(D^+_s \rightarrow \eta^{\prime} \pi^+) = (0.01 \pm 0.12 \pm 0.08)\%, where the first uncertainty is statistical, the second is systematic and the third, relevant for the D+D^+ channels, is due to the uncertainty on ACP(D+ϕπ+)A^{CP}(D^+ \to \phi \pi^+). These measurements, currently the most precise for three of the four channels considered, are consistent with the absence of CPCP violation. A combination of these results with previous LHCb measurements is presented

    Search for the doubly heavy baryon Ξbc+\it{\Xi}_{bc}^{+} decaying to J/ψΞc+J/\it{\psi} \it{\Xi}_{c}^{+}

    No full text
    A first search for the decay is performed by the LHCb experiment with a data sample of proton-proton collisions, corresponding to an integrated luminosity of 9 fb1^{−1} recorded at centre-of-mass energies of 7, 8, and 13 TeV. Two peaking structures are seen with a local (global) significance of and standard deviations at masses of 6571 and 6694 MeV/, respectively. Upper limits are set on the baryon production cross-section times the branching fraction relative to that of the decay at centre-of-mass energies of 8 and 13 TeV, in the and in the rapidity and transverse-momentum ranges from 2.0 to 4.5 and 0 to , respectively. Upper limits are presented as a function of the mass and lifetime.A first search for the Ξbc+J/ψΞc+\it{\Xi}_{bc}^{+}\to J/\it{\psi}\it{\Xi}_{c}^{+} decay is performed by the LHCb experiment with a data sample of proton-proton collisions, corresponding to an integrated luminosity of 9fb19\,\mathrm{fb}^{-1} recorded at centre-of-mass energies of 7, 8, and 13TeV13\mathrm{\,Te\kern -0.1em V}. Two peaking structures are seen with a local (global) significance of 4.3(2.8)4.3\,(2.8) and 4.1(2.4)4.1\,(2.4) standard deviations at masses of 6571MeV ⁣/c26571\,\mathrm{Me\kern -0.1em V\!/}c^2 and 6694MeV ⁣/c26694\,\mathrm{Me\kern -0.1em V\!/}c^2, respectively. Upper limits are set on the Ξbc+\it{\Xi}_{bc}^{+} baryon production cross-section times the branching fraction relative to that of the Bc+J/ψDs+B_{c}^{+}\to J/\it{\psi} D_{s}^{+} decay at centre-of-mass energies of 8 and 13TeV13\mathrm{\,Te\kern -0.1em V}, in the Ξbc+\it{\Xi}_{bc}^{+} and in the Bc+B_{c}^{+} rapidity and transverse-momentum ranges from 2.0 to 4.5 and 0 to 20GeV ⁣/c20\,\mathrm{Ge\kern -0.1em V\!/}c, respectively. Upper limits are presented as a function of the Ξbc+\it{\Xi}_{bc}^{+} mass and lifetime

    Observation of sizeable ω\omega contribution to χc1(3872)π+πJ/ψ\chi_{c1}(3872) \to \pi^+\pi^- J/\psi decays

    No full text
    Resonant structures in the dipion mass spectrum from χc1(3872)π+πJ/ψ\chi_{c1}(3872)\to\pi^+\pi^- J/\psi decays, produced via B+K+χc1(3872)B^+\to K^+\chi_{c1}(3872) decays, are analyzed using proton-proton collision data collected by the LHCb experiment, corresponding to an integrated luminosity of 9 fb1^{-1}. A sizeable contribution from the isospin conserving χc1(3872)ωJ/ψ\chi_{c1}(3872)\to\omega J/\psi decay is established for the first time, (21.4±2.3±2.0)%(21.4\pm2.3\pm2.0)\%, with a significance of more than 7.1σ7.1\sigma. The amplitude of isospin violating decay, χc1(3872)ρ0J/ψ\chi_{c1}(3872)\to\rho^0 J/\psi, relative to isospin conserving decay, χc1(3872)ωJ/ψ\chi_{c1}(3872)\to\omega J/\psi, is properly determined, and it is a factor of six larger than expected for a pure charmonium state.Resonant structures in the dipion mass spectrum from χc1(3872)→π+π-J/ψ decays, produced via B+→K+χc1(3872) decays, are analyzed using proton-proton collision data collected by the LHCb experiment, corresponding to an integrated luminosity of 9  fb-1. A sizeable contribution from the isospin conserving χc1(3872)→ωJ/ψ decay is established for the first time, (21.4±2.3±2.0)%, with a significance of more than 7.1σ. The amplitude of isospin violating decay, χc1(3872)→ρ0J/ψ, relative to isospin conserving decay, χc1(3872)→ωJ/ψ, is properly determined, and it is a factor of 6 larger than expected for a pure charmonium state.Resonant structures in the dipion mass spectrum from χc1(3872)π+πJ/ψ\chi_{c1}(3872)\to\pi^+\pi^- J/\psi decays, produced via B+K+χc1(3872)B^+\to K^+\chi_{c1}(3872) decays, are analyzed using proton-proton collision data collected by the LHCb experiment, corresponding to an integrated luminosity of 9 fb1fb^{-1}. A sizeable contribution from the isospin conserving χc1(3872)ωJ/ψ\chi_{c1}(3872)\to\omega J/\psi decay is established for the first time, (21.4±2.3±2.0)%(21.4\pm2.3\pm2.0)\%, with a significance of more than 7.1σ7.1\sigma. The amplitude of isospin violating decay, χc1(3872)ρ0J/ψ\chi_{c1}(3872)\to\rho^0 J/\psi, relative to isospin conserving decay, χc1(3872)ωJ/ψ\chi_{c1}(3872)\to\omega J/\psi, is properly determined, and it is a factor of six larger than expected for a pure charmonium state
    corecore