1,754 research outputs found
Measurement of Micro-bathymetry with a GOPRO Underwater Stereo Camera Pair
A GO-PRO underwater stereo camera kit has been used to measure the 3D topography (bathymetry) of a patch of seafloor producing a point cloud with a spatial data density of 15 measurements per 3 mm grid square and an standard deviation of less than 1 cm A GO-PRO camera is a fixed focus, 11 megapixel, still-frame (or 1080p high-definition video) camera, whose small form-factor and water-proof housing has made it popular with sports enthusiasts. A stereo camera kit is available providing a waterproof housing (to 61 m / 200 ft) for a pair of cameras. Measures of seafloor micro-bathymetrycapable of resolving seafloor features less than 1 cm in amplitude were possible from the stereoreconstruction. Bathymetric measurements of this scale provide important ground-truth data and boundary condition information for modeling of larger scale processes whose details depend on small-scale variations. Examples include modeling of turbulent water layers, seafloor sediment transfer and acoustic backscatter from bathymetric echo sounders
Uncertainty Modeling for AUV Acquired Bathymetry
Abstract
Autonomous Underwater Vehicles (AUVs) are used across a wide range of mission scenarios and from an increasingly diverse set of operators. Use of AUVs for shallow water (less than 200 meters) mapping applications is of increasing interest. However, an update of the total propagated uncertainty TPU model is required to properly attribute bathymetry data acquired from an AUV platform compared with surface platform acquired data. An overview of the parameters that should be considered for data acquired from an AUV platform is discussed. Data acquired in August 2014 using NOAA’s Remote Environmental Measuring UnitS (REMUS) 600 AUV in the vicinity of Portsmouth, NH were processed and analyzed through Leidos’ Survey Analysis and Area Based EditoR (SABER) software. Variability in depth and position of seafloor features observed multiple times from repeat passes of the AUV, and junctioning of the AUV acquired bathymetry with bathymetry acquired from a surface platform are used to evaluate the TPU model and to characterize the AUV acquired data
A New Method for Generation of Soundings from Phase-Difference Measurements
A desirable feature of bathymetric sonar systems is the production of statistically independent soundings allowing a system to achieve its full capability in resolution and object detection. Moreover gridding algorithms such as the Combined Uncertainty Bathymetric Estimator (CUBE) rely on the statistical independence of soundings to properly estimate depth and discriminate outliers. Common methods of filtering to mitigate uncertainty in the signal processing of both multibeam and phase-differencing sidescan systems (curve fitting in zero-crossing detections and differential phase filtering respectively) can produce correlated soundings. Here we propose an alternative method for the generation of soundings from differential phase measurements made by either sonar type to produce statistically independent soundings. The method extracts individual, non-overlapping and unfiltered, phase-difference measurements (from either sonar type) converting these to sonar-relative receive angle, estimates their uncertainty, fixes the desired depth uncertainty level and combines these individual measurements into an uncertainty-weighted mean to achieve the desired depth uncertainty, and no more. When the signal to noise ratio is sufficiently high such that the desired depth uncertainty is achieved with an individual measurement, bathymetric estimates are produced at the sonar’s full resolution capability. When multiple measurements are required, the filtering automatically adjusts to maintain the desired uncertainty level, degrading the resolution only as necessary. Because no two measurements contribute to a single reported sounding, the resulting estimated soundings are statistically independent and therefore better resolve adjacent objects, increase object detectability and are more suitable for statistical gridding methodologies
Underwater tracking of humpback whales (Megaptera novaeangliae) with high-frequency pingers and acoustic recording tags
A long-baseline acoustic system has been developed for the tracking of humpback whales (Megaptera novaeangliae) that have been tagged with digital acoustic recording devices, or DTAGs, providing quantitative observations of submerged whale behavior. The system includes three acoustic sources deployed from small-boats that follow the whale after the animal has been tagged. Integrated GPS provides positioning and synchronized operation of the sources. Time-encoded signals from the sources are recorded along with whale vocalizations and ambient noise on the whale tag. Time-of-flight measurements, as measured by the tag acoustic data, are converted to range from the whale to each source with a nominal sound speed. A non-linear least-squares solution is then solved for the whale\u27s position. The system is demonstrated with data collected from a tagged animal in the summer of 2007
Optimizing Resolution and Uncertainty in Bathymetric Sonar Systems
Bathymetric sonar systems (whether multibeam or phase-differencing sidescan) contain an inherent trade-off between resolution and uncertainty. Systems are traditionally designed with a fixed spatial resolution, and the parameter settings are optimized to minimize the uncertainty in the soundings within that constraint. By fixing the spatial resolution of the system, current generation sonars operate sub-optimally when the SNR is high, producing soundings with lower resolution than is supportable by the data, and inefficiently when the SNR is low, producing high-uncertainty soundings of little value. Here we propose fixing the sounding measurement uncertainty instead, and optimizing the resolution of the system within that uncertainty constraint. Fixing the sounding measurement uncertainty produces a swath with a variable number of bathymetric estimates per ping, in which each estimate’s spatial resolution is optimized by combining measurements only until the desired depth uncertainty is achieved. When the signal to noise ratio is sufficiently high such that the desired depth uncertainty is achieved with individual measurements, bathymetric estimates are produced at the sonar’s full resolution capability. Correspondingly, a sonar’s resolution is no-longer only considered as a property of the sonar (based on, for example, beamwidth and bandwidth,) but now incorporates geometrical aspects of the measurements and environmental factors (e.g., seafloor scattering strength). Examples are shown from both multibeam and phase- differencing sonar systems
Underwater radiated noise levels of a research icebreaker in the central Arctic Ocean
U.S. Coast Guard Cutter Healy\u27s underwater radiated noise signature was characterized in the central Arctic Ocean during different types of ice-breaking operations. Propulsion modes included transit in variable ice cover, breaking heavy ice with backing-and-ramming maneuvers, and dynamic positioning with the bow thruster in operation. Compared to open-water transit, Healy\u27s noise signature increased approximately 10 dB between 20 Hz and 2 kHz when breaking ice. The highest noise levels resulted while the ship was engaged in backing-and-ramming maneuvers, owing to cavitation when operating the propellers astern or in opposing directions. In frequency bands centered near 10, 50, and 100 Hz, source levels reached 190–200 dB re: 1 μPa at 1 m (full octave band) during ice-breaking operations
Modular Autonomous Biosampler (MAB)- A prototype system for distinct biological size-class sampling and preservation
Presently, there is a community wide deficiency in our ability to collect and preserve multiple size-class biologic samples across a broad spectrum of oceanographic platforms (e.g. AUVs, ROVs, and Ocean Observing System Nodes). This is particularly surprising in comparison to the level of instrumentation that now exists for acquiring physical and geophysical data (e.g. side-scan sonar, current profiles etc.), from these same platforms. We present our effort to develop a low-cost, high sample capacity modular,autonomous biological sampling device (MAB). The unit is designed for filtering and preserving 3 distinct biological size-classes (including bacteria), and is deployable in any aquatic setting from a variety of platform modalities (AUV, ROV, or mooring)
Correction of Bathymetric Survey Artifacts Resulting from Apparent Wave-Induced Vertical Position of an AUV
Recent increases in the capability and reliability of autonomous underwater vehicles (AUVs) have provided the opportunity to conduct bathymetric seafloor surveys in shallow water (\u3c 50 m). Unfortunately, surveys of this water depth may contain artifacts induced by large amplitude wave motion at the surface. The artifacts occur when an onboard pressure sensor determines the depth of the AUV. Waves overhead induce small pressure fluctuations at depth, which modulate the AUV’s pressure sensor output without causing actual vertical movement of the AUV. Since bathymetric measurements are made with respect to the AUV’s depth, these pressure fluctuations, in turn, modulate the measurement of the seafloor. The result is a periodic across-track, vertical offset of the seafloor profile (similar to a heave artifact sometimes common in surface vessel surveys). In this paper we describe our experience with the “Gavia” model AUV (Hafmynd EHF, Iceland) in a recent bathymetric survey during which wave action overhead induced such an artifact with a peak-to-peak amplitude as large as 1 meter. A method for removing the artifact as well as recommendations for modifications to the sonar, INS and AUV to mitigate the effect in the future are provided
Acoustic positioning and tracking in Portsmouth Harbour, New Hampshire
Portsmouth Harbor, New Hampshire, is frequently used as a testing area for multibeam and sidescan sonars, and is the location of numerous ground-truthing studies. Having the ability to accurately position underwater sensors is an important aspect of this type of work. However, underwater positioning in Portsmouth Harbor is challenging. It is relatively shallow, approximately one kilometer wide with depths of less than 25 meters. There is mixing between fresh river water and seawater, which is intensified by high currents and strong tides. This causes a very complicated spatial and temporal sound speed structure. Solutions that use the time-of-arrival of an acoustic pulse to estimate range will require very precise knowledge of the travel paths of the signal in order to separate out issues of multipath arrivals. An alternative solution is to use the phase measurements between closely spaced hydrophones to measure the bearing of an acoustic pinger. By using two bearing measurement devices that are widely separated, the intersection of the two bearings can be used to position the pinger. The advantage of this approach is that the sound speed only needs to be known at the location of the phase measurements. Both time-of-arrival and phase difference systems may encounter difficulties arising from horizontal refraction due to spatially varying sound speed. To ascertain which solution would be optimal in Portsmouth Harbor, the time-of-arrival and phase measurement approaches are being examined individually. Initial field tests have been conducted using a 40 kHz signal to look at bearing accuracy. Using hydrophones that are spaced 2/3 wavelengths apart, the bearing accuracy was found to be 1.25deg for angles up to 20deg from broadside with signal to noise ratios (SNR) greater than 15 dB. The results from the closely spaced hydrophones were used to resolve phase ambiguities, allowing finer bearing measurements to be made between hydrophones spaced 5 wavelengths apart. The fi- ne bearing measurements resulted in a bearing accuracy of 0.3deg for angles up to 20deg from broadside with SNR greater than 15 dB. Field tests planned for summer 2007 will include a more detailed investigation of how the environmental influences affect each of the measurement types including range, signal to noise ratio, currents, and sound speed structure
- …