Synergetic Effects of Alcohol/Water Mixing on the Catalytic Reductive Fractionation of Poplar Wood

One of the foremost challenges in lignocellulose conversion encompasses the integration of effective lignin valorization in current carbohydrate-oriented biorefinery schemes. Catalytic reductive fractionation (CRF) of lignocellulose offers a technology to simultaneously produce lignin-derived platform chemicals and a carbohydrate-enriched pulp via the combined action of lignin solvolysis and metal-catalyzed hydrogenolysis. Herein, the solvent (composition) plays a crucial role. In this contribution, we study the influence of alcohol/water mixtures by processing poplar sawdust in varying MeOH/water and EtOH/water blends. The results show particular effects that strongly depend on the applied water concentration. Low water concentrations enhance the removal of lignin from the biomass, while the majority of the carbohydrates are left untouched (scenario A). Contrarily, high water concentrations favor the solubilization of both hemicellulose and lignin, resulting in a more pure cellulosic residue (scenario B). For both scenarios, an evaluation was made to determine the most optimal solvent composition, based on two earlier introduced empirical efficiency descriptors (denoted LFDE and LFFE). According to these measures, 30 (A) and 70 vol % water (B) showed to be the optimal balance for both MeOH/water and EtOH/water mixtures. This successful implementation of alcohol/water mixtures allows operation under milder processing conditions in comparison to pure alcohol solvents, which is advantageous from an industrial point of view

Influence of Acidic (H₃PO₄) and Alkaline (NaOH) Additives on the Catalytic Reductive Fractionation of Lignocellulose

Reductive catalytic fractionation of lignocellulose is a promising “lignin-first” biorefinery strategy wherein lignin is solvolytically extracted from the cell wall matrix and simultaneously disassembled, resulting in a stable lignin oil and a solid carbohydrate-rich residue. Herein, we report on the different influence of acidic (H₃PO₄) and alkaline (NaOH) additives on the Pd/C-catalyzed reductive processing of poplar wood in methanol (MeOH). It was found that the addition of small quantities of H₃PO₄ results in three rather than two product streams, since under acidic conditions both delignification and alcoholysis of hemicellulose are promoted, leaving behind a cellulose-rich pulp. The simultaneous acid-catalyzed fractionation of the carbohydrates into separate cellulose and hemicellulose streams provides opportunities for more efficient downstream conversion, as processing parameters can be tailored to the needs of both streams. Alkaline conditions, on the other hand, also enhance delignification, but additionally cause (i) the formation of lignin products other than those obtained under neutral and acidic conditions, (ii) a hampered degree of lignin depolymerization, and (iii) substantial loss of cellulose from the pulp. Further on, a modified process descriptor (LFFE: <i>lignin first fractionation efficiency</i>) was applied to evaluate the fractionation efficiency of lignocellulose in its three major constituents. According to this new efficiency measure, mildly acidic conditions performed best

Data_Sheet_1_Engineering Curcumin Biosynthesis in Poplar Affects Lignification and Biomass Yield.docx

Lignocellulosic biomass is recalcitrant toward deconstruction into simple sugars mainly due to the presence of lignin. By engineering plants to partially replace traditional lignin monomers with alternative ones, lignin degradability and extractability can be enhanced. Previously, the alternative monomer curcumin has been successfully produced and incorporated into lignified cell walls of Arabidopsis by the heterologous expression of DIKETIDE-CoA SYNTHASE (DCS) and CURCUMIN SYNTHASE2 (CURS2). The resulting transgenic plants did not suffer from yield penalties and had an increased saccharification yield after alkaline pretreatment. Here, we translated this strategy into the bio-energy crop poplar. Via the heterologous expression of DCS and CURS2 under the control of the secondary cell wall CELLULOSE SYNTHASE A8-B promoter (ProCesA8-B), curcumin was also produced and incorporated into the lignified cell walls of poplar. ProCesA8-B:DCS_CURS2 transgenic poplars, however, suffered from shoot-tip necrosis and yield penalties. Compared to that of the wild-type (WT), the wood of transgenic poplars had 21% less cellulose, 28% more matrix polysaccharides, 23% more lignin and a significantly altered lignin composition. More specifically, ProCesA8-B:DCS_CURS2 lignin had a reduced syringyl/guaiacyl unit (S/G) ratio, an increased frequency of p-hydroxyphenyl (H) units, a decreased frequency of p-hydroxybenzoates and a higher fraction of phenylcoumaran units. Without, or with alkaline or hot water pretreatment, the saccharification efficiency of the transgenic lines was equal to that of the WT. These differences in (growth) phenotype illustrate that translational research in crops is essential to assess the value of an engineering strategy for applications. Further fine-tuning of this research strategy (e.g., by using more specific promoters or by translating this strategy to other crops such as maize) might lead to transgenic bio-energy crops with cell walls more amenable to deconstruction without settling in yield.</p

Lignin-Based Additives for Improved Thermo-Oxidative Stability of Biolubricants

There is an environmental concern regarding the use of petroleum-based lubricants, which are generally toxic and nonbiodegradable. Biobased lubricants, such as vegetable oils, are the alternative: they show excellent lubricity, are readily biodegradable and nontoxic. However, a major disadvantage of using vegetable oils in lubricant applications is their lack of thermo-oxidative stability, which can be improved by antioxidant additives. Here, we propose the use of lignin-based additives in biolubricant formulations to improve this feature, based on lignin’s known antioxidant properties. To ensure a stable dispersion in vegetable oil, lignin was partially esterified. Antioxidant properties of lignin before and after palmitoylation were demonstrated in a 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay. Four different lignin-based fractions, commercial Protobind P1000 soda lignin from straw, solvolytically fractionated Protobind P1000 lignin and two lignin fractions from reductively catalyzed fractionation (RCF) of native birch wood, were tested in biolubricant formulations with castor oil as base oil. Those lignin fractions exhibited excellent performance compared to butylated hydroxytoluene (BHT), a commonly used petroleum-based antioxidant. Formulations of modified lignin in castor oil possess improved thermo-oxidative stability, as illustrated by their increased oxidation induction time. Additionally, rheological and tribological tests demonstrate similar, or in some cases improved, lubricating properties compared to castor oil. This study showcases the successful incorporation of lignin-based antioxidants in biolubricant formulations, tackling the major disadvantage of vegetable oils as environment-friendly lubricants