TPC tracking and particle identification in high-density environment

Track finding and fitting algorithm in the ALICE Time projection chamber (TPC) based on Kalman-filtering is presented. Implementation of particle identification (PID) using d$E$/d$x$ measurement is discussed. Filtering and PID algorithm is able to cope with non-Gaussian noise as well as with ambiguous measurements in a high-density environment. The occupancy can reach up to 40% and due to the overlaps, often the points along the track are lost and others are significantly displaced. In the present algorithm, first, clusters are found and the space points are reconstructed. The shape of a cluster provides information about overlap factor. Fast spline unfolding algorithm is applied for points with distorted shapes. Then, the expected space point error is estimated using information about the cluster shape and track parameters. Furthermore, available information about local track overlap is used. Tests are performed on simulation data sets to validate the analysis and to gain practical experience with the algorithm.Comment: 9 pages, 5 figure

Magnetically modified Posidonia oceanica biomass as an adsorbent for organic dyes removal

Magnetically modified Posidonia oceanica sea grass dead biomass was employed as an adsorbent of organic dyes. The adsorption of seven water-soluble organic dyes was characterized using Langmuir adsorption model. The highest calculated maximum adsorption capacity was found for Bismarck brown Y (233.5 mg g-1), while the lowest capacity value was obtained for safranin O (88.1 mg g-1). The adsorption processes followed the pseudo-second-order kinetic model and the thermodynamic studies indicated spontaneous and endothermic adsorption

Magnetically modified Posidonia oceanica biomass as an adsorbent for organic dyes removal

Magnetically modified Posidonia oceanica sea grass dead biomass was employed as an adsorbent of organic dyes. The adsorption of seven water-soluble organic dyes was characterized using Langmuir adsorption model. The highest calculated maximum adsorption capacity was found for Bismarck brown Y (233.5 mg g-1), while the lowest capacity value was obtained for safranin O (88.1 mg g-1). The adsorption processes followed the pseudo-second-order kinetic model and the thermodynamic studies indicated spontaneous and endothermic adsorption

Band structure of SnTe studied by Photoemission Spectroscopy

We present an angle-resolved photoemission spectroscopy study of the electronic structure of SnTe, and compare the experimental results to ab initio band structure calculations as well as a simplified tight-binding model of the p-bands. Our study reveals the conjectured complex Fermi surface structure near the L-points showing topological changes in the bands from disconnected pockets, to open tubes, and then to cuboids as the binding energy increases, resolving lingering issues about the electronic structure. The chemical potential at the crystal surface is found to be 0.5eV below the gap, corresponding to a carrier density of p =1.14x10^{21} cm^{-3} or 7.2x10^{-2} holes per unit cell. At a temperature below the cubic-rhombohedral structural transition a small shift in spectral energy of the valance band is found, in agreement with model predictions.Comment: 4 figure

Tin telluride: a weakly co-elastic metal

We report resonant ultrasound spectroscopy (RUS), dilatometry/magnetostriction, magnetotransport, magnetization, specific heat, and $^{119}$Sn M\"ossbauer spectroscopy measurements on SnTe and Sn$_{0.995}$Cr$_{0.005}$Te. Hall measurements at $T=77$ K indicate that our Bridgman-grown single crystals have a $p$-type carrier concentration of $3.4 \times 10^{19}$ cm$^{-3}$ and that our Cr-doped crystals have an $n$-type concentration of $5.8 \times 10^{22}$ cm$^{-3}$. Although our SnTe crystals are diamagnetic over the temperature range $2\, \text{K} \leq T \leq 1100\, \text{K}$, the Cr-doped crystals are room temperature ferromagnets with a Curie temperature of 294 K. For each sample type, three-terminal capacitive dilatometry measurements detect a subtle 0.5 micron distortion at $T_c \approx 85$ K. Whereas our RUS measurements on SnTe show elastic hardening near the structural transition, pointing to co-elastic behavior, similar measurements on Sn$_{0.995}$Cr$_{0.005}$Te show a pronounced softening, pointing to ferroelastic behavior. Effective Debye temperature, $\theta_D$, values of SnTe obtained from $^{119}$Sn M\"ossbauer studies show a hardening of phonons in the range 60--115K ($\theta_D$ = 162K) as compared with the 100--300K range ($\theta_D$ = 150K). In addition, a precursor softening extending over approximately 100 K anticipates this collapse at the critical temperature, and quantitative analysis over three decades of its reduced modulus finds $\Delta C_{44}/C_{44}=A|(T-T_0)/T_0|^{-\kappa}$ with $\kappa = 0.50 \pm 0.02$, a value indicating a three-dimensional softening of phonon branches at a temperature $T_0 \sim 75$ K, considerably below $T_c$. We suggest that the differences in these two types of elastic behaviors lie in the absence of elastic domain wall motion in the one case and their nucleation in the other

Superconductivity in the Heusler Family of Intermetallics

Several physical properties of the superconducting Heusler compounds, focusing on two systems (Y, Lu, Sc)Pd2Sn and APd2M, where A=Hf, Zr and M=Al, In, are summarized and compared. The analysis of the data shows the importance of the electron-phonon coupling for superconductivity in this family. We report the superconducting parameters of YPd2Sn, which has the highest Tc among all known Heusler superconductors.Comment: Accepted for publication in Phys. Rev.

Particle dependence of elliptic flow in Au+Au collisions at sNN=\sqrt{s_{NN}}= 200 GeV

The elliptic flow parameter ($v_2$) for $K_S^0$ and $\Lambda+\bar{\Lambda}$ has been measured at mid-rapidity in Au + Au collisions at $\sqrt{s_{_{NN}}}=200$ GeV by the STAR collaboration. The $v_2$ values for both $K_S^{0}$ and $\Lambda+\bar{\Lambda}$ saturate at moderate $p_T$, deviating from the hydrodynamic behavior observed in the lower $p_T$ region. The saturated $v_2$ values and the $p_T$ scales where the deviation begins are particle dependent. The particle-type dependence of $v_2$ shows features expected from the hadronization of a partonic ellipsoid by coalescence of co-moving quarks. These results will be discussed in relation to the nuclear modification factor ($R_{CP}$) which has also been measured for $K_S^0$ and $\Lambda+\bar{\Lambda}$ by the STAR collaboration.Comment: 6 pages, 3 figures, Strange Quark Matter 2003 Conference (SQM 2003): updated with 2 figures from original talk that did not appear in the journa

New results from the NA57 experiment

We report results from the experiment NA57 at CERN SPS on hyperon production at midrapidity in Pb-Pb collisions at 158 $A$ GeV/$c$ and 40 $A$ GeV/$c$. $\Lambda$, $\Xi$ and $\Omega$ yields are compared with those from the STAR experiment at the higher energy of the BNL RHIC. $\Lambda$, $\Xi$, $\Omega$\ and preliminary $K_S^0$ transverse mass spectra are presented and interpreted within the framework of a hydro-dynamical blast wave model.Comment: 8 pages, 3 figures, contribution to the proceedings of The XXXVIIIth Rencontres de Moriond "QCD and High Energy Hadronic Interactions

Strange particle production in 158 and 40 AA GeV/cc Pb-Pb and p-Be collisions

Results on strange particle production in Pb-Pb collisions at 158 and 40 $A$ GeV/$c$ beam momentum from the NA57 experiment at CERN SPS are presented. Particle yields and ratios are compared with those measured at RHIC. Strangeness enhancements with respect to p-Be reactions at the same beam momenta have been also measured: results about their dependence on centrality and collision energy are reported and discussed.Comment: Contribution to the proceedings of the "Hot Quarks 2004" Conference, July 18-24 2004, New Mexico, USA, submitted to Journal of Physics G 7 pages, 5 figure