Simulating Postbuckling Behaviour and Collapse of Stiffened CFRP Panels

Advanced composite materials are well known for their outstanding potential in weight-related stiffness and strength leading to an ever increasing share in aerospace structural components out of Carbon Fibre Reinforced Plastics (CFRP). In order to fully exploit the load-carrying capacity of such structures an accurate and reliable simulation is indispensable. Local buckling is not necessarily the load bearing limit for stiffened panels or shells; their full potential can be tapped only by utilizing the postbuckling region. That, however, requires fast tools which are capable of simulating the structural behaviour beyond bifurcation points including material degradation up to collapse. The most critical structural degradation mode is skin stringer separation; delamination, especially within the stringer, is a critical material degradation. A reliable prediction of collapse requires knowledge of degradation due to static as well as low cycle loading in the postbuckling region. Earlier projects have shown that it needs considerable experience in simulating the postbuckling behaviour. Though a great deal of knowledge about CFRP structural and material degradation is available its influence on collapse is not yet sufficiently investigated. It is the aim of the project COCOMAT (Improved MATerial exploitation at safe design of COmposite airframe structures by accurate simulation of COllapse) to develop means for and gain experience in fast and accurate simulation of the collapse load of stringer stiffened CFRP curved panels taking degradation and cyclic loading as well as geometric nonlinearity into account. COCOMAT is a Specific Targeted Research Project supported by the EU 6th Framework Programme; it started 2004 and runs for 4 years. Main deliverables are: • test results for buckling and collapse of undamaged and pre-damaged stiffened CFRP panels under static and cyclic loading, • improved material properties and degradation models, computational tools for design and certification of stiffened fibre composite panels which take postbuckling behaviour, degradation and collapse into account, • and finally design guidelines and industrial validation. The work will lead to an extended experimental data base, relevant degradation models and improved simulation tools for certification as well as for design. These results should allow setting up a future design scenario which exploits the existing reserves in primary fibre composite structures. The paper starts out from results provided by the forerunners of COCOMAT, describes the main objectives of the project, gives a general status of the progress reached so far and presents first results

Design and Analysis of Composite Panels

European aircraft industry demands for reduced development and operating costs, by 20% and 50% in the short and long term, respectively. Contributions to this aim are provided by the completed project POSICOSS (5thFP) and the running follow-up project COCOMAT (6thFP), both supported by the European Commission. As an important contribution to cost reduction a decrease in structural weight can be reached by exploiting considerable reserves in primary fibre composite fuselage structures through an accurate and reliable simulation of postbuckling up to collapse. The POSICOSS team developed fast procedures for postbuckling analysis of stiffened fibre composite panels, created comprehensive experimental data bases and derived design guidelines. COCOMAT builds up on the POSICOSS results and considers in addition the simulation of collapse by taking degradation into account. The results comprise an extended experimental data base, degradation models, improved certification and design tools as well as design guidelines. The projects POSICOSS and COCOMAT develop improved tools which are validated by experimental results obtained during the projects. Because the new tools must consider a wide range of different aspects a lot of different structures had to be tested. These structures were designed under different design objectives. For the design process the consortium applied already available simulation tools and brought in their own design experience. This paper deals with the design process within both projects and the analysis procedure applied within this task. It focuses on the experience of DLR on the design and analysis of stringer stiffened CFRP panels gained in the frame of these projects

Probabilistic Approach for better Buckling Knock-down Factors of CFRP Cylindrical Shells - Tests and Analyses

The industry in the fields of civil and mechanical engineering, and in particular of aerospace demands for significantly reduced development and operating costs. Reduction of structural weight at safe design is one avenue to achieve this objective. The running ESA (European Space Agency) study Probabilistic Aspects of Buckling Knock Down Factors – Tests and Analyses contributes to this goal by striving for an improved buckling knock-down factor (the ratio of buckling loads of imperfect and perfect structures) for unstiffened CFRP (carbon fiber reinforce plastics) cylindrical shells, and by validation of the linear and non-linear buckling simulations based on test results. DLR is acting as study contractor. The paper presents an overview about the DLR buckling tests, the measurement setup and the buckling simulations which are done so far, and gives an outlook to the results which are expected until the end of the running project

Studies of Impefection Sensitive Conical Composite Structures

The stability of shell structures has been an object of studies for more than a century. Thin walled cylindrical and conical structures are widely used in aerospace, offshore, marine, civil and other industries. Nowadays, with the growing application of composite materials a deep understanding of the influence of their properties and the laminate stacking sequence on the mechanical behaviour of shell structures is increasingly more important. As it is already known, one of the most significant sources of discrepancy between theoretical predictions and experimental results for the buckling load is the presence of geometric imperfections. Currently, imperfection sensitive shell structures are generally designed, at the preliminary design phase, according to the guideline NASA SP-8007 for cylinders and NASA SP-8019 for truncated cones using the conservative lower bound curve, which does not consider composite material characteristics. Hühne developed the Single Perturbation Load Approach (SPLA), a robust design method that stimulates a single buckle, which is assumed as a “worst-case” geometrical imperfection [1]. There have been carried out considerably more numerical, analytical and experimental studies on cylindrical shells than on conical shells. Currently typical composite launcher structures are investigated by 12 partners in the European project DESICOS [4]. The aim of this paper is to study the SPLA on a conical shell structure and compare it with the NASA design approach

Antibacterial Activity of Marine and Black Band Disease Cyanobacteria against Coral-Associated Bacteria

Black band disease (BBD) of corals is a cyanobacteria-dominated polymicrobial disease that contains diverse populations of heterotrophic bacteria. It is one of the most destructive of coral diseases and is found globally on tropical and sub-tropical reefs. We assessed ten strains of BBD cyanobacteria, and ten strains of cyanobacteria isolated from other marine sources, for their antibacterial effect on growth of heterotrophic bacteria isolated from BBD, from the surface mucopolysaccharide layer (SML) of healthy corals, and three known bacterial coral pathogens. Assays were conducted using two methods: co-cultivation of cyanobacterial and bacterial isolates, and exposure of test bacteria to (hydrophilic and lipophilic) cyanobacterial cell extracts. During co-cultivation, 15 of the 20 cyanobacterial strains tested had antibacterial activity against at least one of the test bacterial strains. Inhibition was significantly higher for BBD cyanobacteria when compared to other marine cyanobacteria. Lipophilic extracts were more active than co-cultivation (extracts of 18 of the 20 strains were active) while hydrophilic extracts had very limited activity. In some cases co-cultivation resulted in stimulation of BBD and SML bacterial growth. Our results suggest that BBD cyanobacteria are involved in structuring the complex polymicrobial BBD microbial community by production of antimicrobial compounds

Chimpanzees communicate to two different audiences during aggressive interactions

Conflict and aggressive interactions are common phenomena in group-living animals and vocal behaviour often plays an important role in determining their outcomes. In some species, vocal signals seem to provide bystanders with information about the nature of an ongoing aggressive interaction, which can be beneficial for the victims. For example, in chimpanzees and some other primates, victims adjust their screams depending on the composition of the by-standing audience, probably to solicit their support. Considerably less is known, however, about the role of other call types produced by victims of aggression. In this study, we focused on the fact that, immediately after screams, chimpanzee, Pan troglodytes schweinfurthii, victims often produce 'waa' barks, but little is known about their function. Our results showed that for screams, but not 'waa' barks, production was dependent on the audience composition with victims being more likely to scream when adult or late-adolescent males were in close proximity. We also found that after 'waa' barking, but not screaming, victims were more likely to retaliate against and less likely to reconcile with their aggressors, and that 'waa' barking was more common after victims had received support from other party members. These results suggest that, in chimpanzees, victims of aggression vocalize with a dual social strategy of attempting to recruit support from bystanders and to repel their attackers by signalling readiness to retaliate. We conclude that victim scream and 'waa' bark calls, although often produced during the same agonistic event, are directed at different audiences and fulfil different social functions, and that these calls can mediate both aggressive interactions and aggressor-victim relationships following aggression

Microbiome dynamics in the tissue and mucus of acroporid corals differ in relation to host and environmental parameters

Corals are associated with diverse microbial assemblages; however, the spatial-temporal dynamics of intra-species microbial interactions are poorly understood. The coral-associated microbial community varies substantially between tissue and mucus microhabitats; however, the factors controlling the occurrence, abundance, and distribution of microbial taxa over time have rarely been explored for different coral compartments simultaneously. Here, we test (1) differentiation in microbiome diversity and composition between coral compartments (surface mucus and tissue) of two Acropora hosts (A. tenuis and A. millepora) common along inshore reefs of the Great Barrier Reef, as well as (2) the potential linkage between shifts in individual coral microbiome families and underlying host and environmental parameters. Amplicon based 16S ribosomal RNA gene sequencing of 136 samples collected over 14 months, revealed significant differences in bacterial richness, diversity and community structure among mucus, tissue and the surrounding seawater. Seawater samples were dominated by members of the Synechococcaceae and Pelagibacteraceae bacterial families. The mucus microbiome of Acropora spp. was dominated by members of Flavobacteriaceae, Synechococcaceae and Rhodobacteraceae and the tissue was dominated by Endozoicimonaceae. Mucus microbiome in both Acropora species was primarily correlated with seawater parameters including levels of chlorophyll a, ammonium, particulate organic carbon and the sum of nitrate and nitrite. In contrast, the correlation of the tissue microbiome to the measured environmental (i.e., seawater parameters) and host health physiological factors differed between host species, suggesting host-specific modulation of the tissue-associated microbiome to intrinsic and extrinsic factors. Furthermore, the correlation between individual coral microbiome members and environmental factors provides novel insights into coral microbiome-by-environment dynamics and hence has potential implications for current reef restoration and management efforts (e.g. microbial monitoring and observatory programs).Portuguese Foundation for Science and Technology: UIDB/04326/2020/ SFRH/BDP/110285/2015 SFRH/BSAB/150485/2019info:eu-repo/semantics/publishedVersio

Development of Bacterial Biofilms on Artificial Corals in Comparison to Surface-Associated Microbes of Hard Corals

Numerous studies have demonstrated the differences in bacterial communities associated with corals versus those in their surrounding environment. However, these environmental samples often represent vastly different microbial micro-environments with few studies having looked at the settlement and growth of bacteria on surfaces similar to corals. As a result, it is difficult to determine which bacteria are associated specifically with coral tissue surfaces. In this study, early stages of passive settlement from the water column to artificial coral surfaces (formation of a biofilm) were assessed. Changes in bacterial diversity (16S rRNA gene), were studied on artificially created resin nubbins that were modelled from the skeleton of the reef building coral Acropora muricata. These models were dip-coated in sterile agar, mounted in situ on the reef and followed over time to monitor bacterial community succession. The bacterial community forming the biofilms remained significantly different (R = 0.864 p<0.05) from that of the water column and from the surface mucus layer (SML) of the coral at all times from 30 min to 96 h. The water column was dominated by members of the α-proteobacteria, the developed community on the biofilms dominated by γ-proteobacteria, whereas that within the SML was composed of a more diverse array of groups. Bacterial communities present within the SML do not appear to arise from passive settlement from the water column, but instead appear to have become established through a selection process. This selection process was shown to be dependent on some aspects of the physico-chemical structure of the settlement surface, since agar-coated slides showed distinct communities to coral-shaped surfaces. However, no significant differences were found between different surface coatings, including plain agar and agar enhanced with coral mucus exudates. Therefore future work should consider physico-chemical surface properties as factors governing change in microbial diversity