4 research outputs found

    Shock Wave Structure in Particulate Composites

    Get PDF
    An experimental study of shock wave profiles in particulate composites of various compositions is undertaken to determine how shock width and rise times depend on the mean particulate size. The composites under examination serve as a model for concrete or polymer bonded explosives, based upon the impedance mismatch between the relatively stiff particulates and compliant matrix. Polymethyl Methacrylate (PMMA) and glass spheres ranging in size from 100 μm to 1000 μm are used in concentrations of 30% and 40% glass by volume for experiments with a single bead size, and up to 50% glass by volume for multi-mode particle size distributions. A linear change in shock wave rise time is observed as a function of mean particulate diameter

    Shock Wave Response of Iron-based In Situ Metallic Glass Matrix Composites

    Get PDF
    The response of amorphous steels to shock wave compression has been explored for the first time. Further, the effect of partial devitrification on the shock response of bulk metallic glasses is examined by conducting experiments on two iron-based in situ metallic glass matrix composites, containing varying amounts of crystalline precipitates, both with initial composition Fe_(49.7)Cr_(17.7)Mn_(1.9)Mo_(7.4)W_(1.6)B_(15.2)C_(3.8)Si_(2.4). The samples, designated SAM2X5-600 and SAM2X5-630, are X-ray amorphous and partially crystalline, respectively, due to differences in sintering parameters during sample preparation. Shock response is determined by making velocity measurements using interferometry techniques at the rear free surface of the samples, which have been subjected to impact from a high-velocity projectile launched from a powder gun. Experiments have yielded results indicating a Hugoniot Elastic Limit (HEL) to be 8.58 ± 0.53 GPa for SAM2X5-600 and 11.76 ± 1.26 GPa for SAM2X5-630. The latter HEL result is higher than elastic limits for any BMG reported in the literature thus far. SAM2X5-600 catastrophically loses post-yield strength whereas SAM2X5-630, while showing some strain-softening, retains strength beyond the HEL. The presence of crystallinity within the amorphous matrix is thus seen to significantly aid in strengthening the material as well as preserving material strength beyond yielding
    corecore