4,698 research outputs found

    Prospects and progress of high Tc superconductivity for space applications

    Get PDF
    Current research in the area of high temperature superconductivity is organized around four key areas: communications and data, sensors and cryogenics, propulsion and power, and space materials technology. Recently, laser ablated YBa2Cu3O(7-x) films on LaAlO3 produced far superior RF characteristics when compared to metallic films on the same substrate. The achievement has enabled a number of unique microwave device applications, such as low insertion loss phase shifters and high-Q filters. Melt texturing and melt-quenched techniques are being used to produce bulk material with optimized magnetic properties. These yttrium-enriched materials possess enhanced flux pinning characteristics and could lead to prototype cryocooler bearings. Significant progress has also occurred in bolometer and current lead technology. Studies were conducted to evaluate the effect of high temperature superconducting materials on the performance and life of high power magnetoplasma-dynamic thrusters. Extended studies were also performed to evaluate the benefit of superconducting magnetic energy storage for LEO space station, lunar, and Mars mission applications

    Habitat Use and Effects of Prescribed Fire on Black Bears in Northwestern Florida

    Get PDF
    I determined food habits, habitat use, and the effects of fire on habitat use by Florida black bears (Ursus americanus floridanus) on Eglin Air Force Base (Eglin), Florida from November 1994 to October 1996. I determined the annual and seasonal diet of bears from 259 scats collected on Eglin. Annual diet was dominated by shrub/vine fruit (38%) and tree fruit (34%). Spring diets were dominated by debris, fleshy material (hearts) of saw palmetto (Serenoa repens) beetles (Coleoptera), and yellow jackets (Hymenoptera). Blueberries (Vaccinium spp.) dominated the early summer diet, whereas sweet gallberry (Ilex coriacea) and acorns (Quercus spp.) dominated the late summer diet. Acorns and saw palmetto berries dominated the fall diet accounting for 93% of the diet by volume. Winter scats were dominated by saw palmetto and greenbriar berries (Smilax spp.). Vegetation, primarily the hearts of saw palmetto and gallberry leaves accounted for 27% by volume. The dominance of saw palmetto berries in the 1994 fall diet indicates that bears selected saw palmetto over acorns as the primary fall food whenavailable. I used a GIS and compositional analysis to determine annual habitat use from 1,891 location estimates of 9 bears (3F, 6M). To determine seasonal habitat use, 1,049 location estimates of 10 bears (3F, 7M) for summer and 794 location estimates of 10 bears (3F, 7M) for fall were used. Nonrandom use was detected for annual (P ≤ 0.0027), summer (P ≤ 0.0002), and fall (P ≤ 0.0006) habitat use. Compositional analysis ranked habitats for annual use in the following order: riparian zones \u3e swamps \u3e pine plantations \u3e sandhills \u3e open areas. There was a difference (P ≤ 0.025) in annual use between riparian zones and swamps and each showed greater use than the remaining habitat associations. Riparian zones and swamps also ranked highest for summer and fall seasons. Riparian zones provided an abundant food supply, escape cover, and denning habitat. The decrease in vegetation density along the edges of riparian zones allowed bears to travel more efficiently within their home range. Pine plantations containing slash pine (Pinus elliottii) were used more than sandhills during the summer season. The 3-5 year burning cycle in pine habitats allowed many soft mast species to reach maximum production. The lower use of sandhills during the summer was attributed to the higher frequency of fire. Frequent burning in sandhills reduced the amount of soft mast available to bears. The use of sandhills was highest during the fall season, ranking third in use. This coincided with the availability of oak hard mast and saw palmetto berries. Open areas were used significantly less than all other habitat associations during the summer and fall seasons. The low use of open areas was attributed to the lack of sufficient cover. I used a GIS and compositional analysis to determined the annual and seasonal use of prescribed burns conducted from 1988 to 1996 by black bears on Eglin. Nonrandom use (P ≤ 0.05) was detected in all years except 1991 and 1995 for annual habitat use. Burned areas ranked highest for years 1989 ( 6-year-old burns) and 1993 (2-year-old burns), ranking 3rd and 4th, respectively. Burned areas generally ranked higher than open areas but lower than all other habitat types. Seasonal habitat use of burned areas ranked 1993 (2-year-old burns) and 1995 ( The most frequently used burned areas were those adjacent to riparian zones and swamps. The strong dependence on these areas for escape cover may have outweighed any deleterious effects burns may have caused. Prescribed burning can be detrimental to bears during the winter denning season. An adult female bear abandoned her den following a prescribed burn. In light of the above results management strategies are discussed that may increase the availability of soft and hard mast and improve habitat quality for black bears on Eglin

    Five Poems

    Get PDF

    Religion, The Constitution, and Modern Rivals: Our Founders and Theirs

    Get PDF

    Ni abundance in the core of the Perseus Cluster: an answer to the significance of resonant scattering

    Get PDF
    Using an XMM-Newton observation of the Perseus cluster we show that the excess in the flux of the 7-8 keV line complex previously detected by ASCA and BeppoSAX is due to an overabundance of Nickel rather than to an anomalously high Fe Heβ\beta/Fe Heα\alpha ratio. This observational fact leads to the main result that resonant scattering, which was assumed to be responsible for the supposed anomalous Fe Heβ\beta/Fe Heα\alpha ratio, is no longer required. The absence of resonant scattering points towards the presence of significant gas motions (either turbulent or laminar) in the core of the Perseus cluster.Comment: 29 pages, 10 bw figures, accepted for publication in the Astrophysical Journa

    Lead-tellurium oxysalts from Otto Mountain near Baker, California: IV. Markcooperite, Pb(UO_2)Te^(6+)O_6, the first natural uranyl tellurate

    Get PDF
    Markcooperite, Pb_2(UO_2)Te^(6+)O_6, is a new tellurate from Otto Mountain near Baker, California, named in honor of Mark A. Cooper of the University of Manitoba for his contributions to mineralogy. The new mineral occurs on fracture surfaces and in small vugs in brecciated quartz veins. Markcooperite is directly associated with bromian chlorargyrite, iodargyrite, khinite-4O, wulfenite, and four other new tellurates: housleyite, thorneite, ottoite, and timroseite. Various other secondary minerals occur in the veins, including two other new secondary tellurium minerals: paratimroseite and telluroperite. Markcooperite is monoclinic, space group P2_1/c, a = 5.722(2), b = 7.7478(2), c = 7.889(2) Å, β = 90.833(5)°, V = 349.7(2) Å^3, and Z = 2. It occurs as pseudotetragonal prisms to 0.2 mm with the forms {100} and {011} and as botryoidal intergrowths to 0.3 mm in diameter; no twinning was observed. Markcooperite is orange and transparent, with a light orange streak and adamantine luster, and is non-fluorescent. Mohs hardness is estimated at 3. The mineral is brittle, with an irregular fracture and perfect {100} cleavage. The calculated density is 8.496 g/cm3 based on the empirical formula. Markcooperite is biaxial (+), with indices of refraction α= 2.11, β = 2.12, γ= 2.29 calculated using the Gladstone-Dale relationship, measured α-β birefringence of 0.01 and measured 2V of 30(5)°. The optical orientation is X = c, Y = b, Z = a. The mineral is slightly pleochroic in shades of orange, with absorption: X > Y = Z. No dispersion was observed. Electron microprobe analysis provided PbO 50.07, TeO_3 22.64, UO_3 25.01, Cl 0.03, O≡Cl –0.01, total 97.74 wt%; the empirical formula (based on O+Cl = 8) is Pb_(2.05)U_(0.80)Te^(6+)_(1.18)O_(7.99)Cl_(0.01). The strongest powder X-ray diffraction lines are [d_(obs) in Å (hkl) I]: 3.235 (120, 102, 1[overbar]02) 100, 2.873 (200) 40, 2.985 (1[overbar]21, 112, 121) 37, 2.774 (022) 30, 3.501 (021, 012) 29, 2.220 (221, 2[overbar]21, 212) 23, 1.990 (222, 2[overbar]22) 21, and 1.715 (320) 22. The crystal structure (R_1 = 0.052) is based on sheets of corner-sharing uranyl square bipyramids and tellurate octahedra, with Pb atoms between the sheets. Markcooperite is the first compound to show Te^(6+) substitution for U^(6+) within the same crystallographic site. Markcooperite is structurally related to synthetic Pb(UO_2)O_2

    Lead-tellurium oxysalts from Otto Mountain near Baker, California: V. Timroseite, Pb_2Cu_5^(2+)(Te^(6+)O_6)_2(OH)_2, and paratimroseite, Pb_2Cu_4^(2+)(Te^(6+)O_6)_2(H_2O)_2, two new tellurates with Te-Cu polyhedral sheets

    Get PDF
    Timroseite, Pb_2Cu_5^(2+)(Te^(6+)O_6)_2(OH)_2, and paratimroseite, Pb_2Cu_4^(2+)(Te^(6+)O_6)_2(H_2O)_2, are two new tellurates from Otto Mountain near Baker, California. Timroseite is named in honor of Timothy (Tim) P. Rose and paratimroseite is named for its relationship to timroseite. Both new minerals occur on fracture surfaces and in small vugs in brecciated quartz veins. Timroseite is directly associated with acanthite, cerussite, bromine-rich chlorargyrite, chrysocolla, gold, housleyite, iodargyrite, khinite-4O, markcooperite, ottoite, paratimroseite, thorneite, vauquelinite, and wulfenite. Paratimroseite is directly associated with calcite, cerussite, housleyite, khinite-4O, markcooperite, and timroseite. Timroseite is orthorhombic, space group P2_1nm, a = 5.2000(2), b = 9.6225(4), c = 11.5340(5) Å, V = 577.13(4) Å^3, and Z = 2. Paratimroseite is orthorhombic, space group P2_12_12_1, a = 5.1943(4), b = 9.6198(10), c = 11.6746(11) Å, V = 583.35(9) Å^3, and Z = 2. Timroseite commonly occurs as olive to lime green, irregular, rounded masses and rarely in crystals as dark olive green, equant rhombs, and diamond-shaped plates in subparallel sheaf-like aggregates. It has a very pale yellowish green streak, dull to adamantine luster, a hardness of about 2 1/2 (Mohs), brittle tenacity, irregular fracture, no cleavage, and a calculated density of 6.981 g/cm^3. Paratimroseite occurs as vibrant "neon" green blades typically intergrown in irregular clusters and as lime green botryoids. It has a very pale green streak, dull to adamantine luster, a hardness of about 3 (Mohs), brittle tenacity, irregular fracture, good {001} cleavage, and a calculated density of 6.556 g/cm^3. Timroseite is biaxial (+) with a large 2V, indices of refraction > 2, orientation X = b, Y = a, Z = c and pleochroism: X = greenish yellow, Y = yellowish green, Z = dark green (Z > Y > X). Paratimroseite is biaxial (–) with a large 2V, indices of refraction > 2, orientation X = c, Y = b, Z = a and pleochroism: X = light green, Y = green, Z = green (Y = Z >> X). Electron microprobe analysis of timroseite provided PbO 35.85, CuO 29.57, TeO_3 27.75, Cl 0.04, H_2O 1.38 (structure), O≡Cl –0.01, total 94.58 wt%; the empirical formula (based on O+Cl = 14) is Pb_(2.07) Cu^(2+)_(4.80)Te^(6+)_(2.04)O_(12)(OH)_(1.98)Cl_(0.02). Electron microprobe analysis of paratimroseite provided PbO 36.11, CuO 26.27, TeO_3 29.80, Cl 0.04, H_2O 3.01 (structure), O≡Cl –0.01, total 95.22 wt%; the empirical formula (based on O+Cl = 14) is Pb_(1.94)Cu^(2+)_(3.96)Te^(6+)_(2.03)O_(12)(H_2O)_(1.99)Cl_(0.01). The strongest powder X-ray diffraction lines for timroseite are [d_(obs) in Å (hkl) I]: 3.693 (022) 43, 3.578 (112) 44, 3.008 (023) 84, 2.950 (113) 88, 2.732 (130) 100, 1.785 (multiple) 33, 1.475 (332) 36; and for paratimroseite 4.771 (101) 76, 4.463 (021) 32, 3.544 (120) 44, 3.029 (023,122) 100, 2.973 (113) 48, 2.665 (131) 41, 2.469 (114) 40, 2.246 (221) 34. The crystal structures of timroseite (R_1 = 0.029) and paratimroseite (R_1 = 0.039) are very closely related. The structures are based upon edge- and corner-sharing sheets of Te and Cu polyhedra parallel to (001) and the sheets in both structures are identical in topology and virtually identical in geometry. In timroseite, the sheets are joined to one another along c by sharing the apical O atoms of Cu octahedra, as well as by sharing edges and corners with an additional CuO_5 square pyramid located between the sheets. The sheets in paratimroseite are joined only via Pb-O and H bonds

    Lead-tellurium oxysalts from Otto Mountain near Baker, California: VI. Telluroperite, Pb_3Te^(4+)O_4Cl_2, the Te analog of perite and nadorite

    Get PDF
    Telluroperite, Pb_3Te^(4+)O_4Cl_2, is a new tellurite from Otto Mountain near Baker, California. The new mineral occurs on fracture surfaces and in small vugs in brecciated quartz veins in direct association with acanthite, bromine-rich chlorargyrite, caledonite, cerussite, galena, goethite, and linarite. Various other secondary minerals occur in the veins, including six new tellurates, housleyite, markcooperite, paratimroseite, ottoite, thorneite, and timroseite. Telluroperite is orthorhombic, space group Bmmb, a = 5.5649(6), b = 5.5565(6), c = 12.4750(14) Å, V = 386.37(7) Å^3, and Z = 2. The new mineral occurs as rounded square tablets and flakes up to 0.25 mm on edge and 0.02 mm thick. The form {001} is prominent and is probably bounded by {100}, {010}, and {110}. It is bluish-green and transparent, with a pale bluish-green streak and adamantine luster. The mineral is non-fluorescent. Mohs hardness is estimated to be between 2 and 3. The mineral is brittle, with a curved fracture and perfect {001} cleavage. The calculated density based on the empirical formula is 7.323 g/cm^3. Telluroperite is biaxial (–), with very small 2V (~10°). The average index of refraction is 2.219 calculated by the Gladstone-Dale relationship. The optical orientation is X = c and the mineral exhibits moderate bluish-green pleochrosim; absorption: X < Y = Z. Electron microprobe analysis provided PbO 72.70, TeO_2 19.26, Cl 9.44, O≡Cl –2.31, total 99.27 wt%. The empirical formula (based on O+Cl = 6) is Pb_(2.79)Te_(1.03)^(4+)O_(3.72)Cl_(2.28). The six strongest powder X-ray diffraction lines are [d_(obs) in Å (hkl) I]: 3.750 (111) 58, 2.857 (113) 100, 2.781 (020, 200) 43, 2.075 (024, 204) 31, 1.966 (220) 30, and 1.620 (117, 313, 133) 52. The crystal structure (R_1 = 0.056) is based on the Sillén X_1 structure-type and consists of a three-dimensional structural topology with lead-oxide halide polyhedra linked to tellurium/lead oxide groups. The mineral is named for the relationship to perite and the dominance of Te (with Pb) in the Bi site of perite
    • …
    corecore