Electrically Conductive, Tough Hydrogels with pH Sensitivity

Electrically conductive, mechanically tough hydrogels based on a double network (DN) comprised of poly­(ethylene glycol) methyl ether methacrylate (PPEGMA) and poly­(acrylic acid) (PAA) were produced. Poly­(3,4-ethylenedioxythiophene) (PEDOT) was chemically polymerized within the tough DN gel to provide electronic conductivity. The effects of pH on the tensile and compressive mechanical properties of the fully swollen hydrogels, along with their electrical conductivity and swelling ratio were determined. Compressive and tensile strengths as high as 11.6 and 0.6 MPa, respectively, were obtained for hydrogels containing PEDOT with a maximum conductivity of 4.3 S cm^–1. This conductivity is the highest yet reported for hydrogel materials of high swelling ratios. These hydrogels may be useful as soft strain sensors because their electrical resistance changed significantly when cyclically loaded in compression

Liquid Crystalline Behavior of Graphene Oxide in the Formation and Deformation of Tough Nanocomposite Hydrogels

In this paper, we report the formation and transformation of graphene oxide (GO) liquid crystalline (LC) structures in the synthesis and deformation of tough GO nanocomposite hydrogels. GO aqueous dispersions form a nematic LC phase, while the addition of poly­(<i>N</i>-vinylpyrrolidone) (PVP) and acrylamide (AAm), which are capable of forming hydrogen bonding with GO nanosheets, shifts the isotropic/nematic transition to a lower volume fraction of GO and enhances the formation of nematic droplets. During the gelation process, a phase separation of the polymers and GO nanosheets is accompanied by the directional assembly of GO nanosheets, forming large LC tactoids with a radial GO configuration. The shape of the large tactoids evolves from a sphere to a toroid as the tactoids increase in size. Interestingly, during cyclic uniaxial tensile deformation a reversible LC transition is observed in the very tough hydrogels. The isolated birefringent domains and the LC domains in the tactoids in the gels are highly oriented under a high tensile strain

Facile Fabrication of Tough Hydrogels Physically Cross-Linked by Strong Cooperative Hydrogen Bonding

Novel hydrogels with excellent mechanical properties have prompted applications in biomedical and other fields. The reported tough hydrogels are usually fabricated by complicated chemical and/or physical methods. To develop more facile fabrication methods is very important for the practical applications of tough hydrogels. We report a very simple yet novel method for fabricating tough hydrogels that are totally physically cross-linked by cooperative hydrogen bonding between a pre-existing polymer and an <i>in situ</i> polymerized polymer. In this work, tough hydrogels are prepared by heating aqueous acrylamide (AAm) solution in the presence of poly­(<i>N</i>-vinylpyrrolidone) (PVP) but without any chemical initiators or covalent bonding cross-linking agents. Mechanical tests of the as-prepared and swollen PVP-<i>in situ</i>-PAAm hydrogels show that they exhibit very high tensile strengths, high tensile extensibility, high compressive strengths, and low moduli. Comparative synthesis experiments, DSC characterization, and molecular modeling indicate that the formation of strong cooperative hydrogen bonding between the pre-existing PVP and the <i>in situ</i> formed PAAm chains contributes to the gel formation and the toughening of the hydrogels. The unique microstructure of the gels with evenly distributed flexible cross-linking sites and long polymer chains attached to them endow the hydrogels with an excellent mechanism of distributing the applied load