Optical and structural properties of cadmium sulphide quantum dots based thin films as potential sensing material for dengue virus E-protein

In this work, cadmium sulfide quantum dots composited with polyamidoamine dendrimer (CdSQDs-PAMAM) thin film had been successfully developed for use in the detection of dengue virus (DENV) E-proteins. Studies involving XRD, EDX, UV–Vis-NIR, and AFM analyses proved the presence of CdSQDs and PAMAM nanoparticles. The mechanism of sensor surface functionalization was confirmed using FTIR spectra. The SPR responses showed a significant shift in resonance angle after exposure to different concentrations of DENV E-protein solution. From this observation, the Au/CdSQDs-PAMAM/IgM sensor film obtained a quantification limit of 0.0001 nM with the association constant of 2.53 × 103 M−1, which was better compared to the Au/IgM and Au/PAMAM/IgM sensor films. The matrix analysis was successfully performed using spiked bovine serum albumin obtaining excellent recovery values in the results. The enhancement of the SPR responses thus showing the high potential of CdSQDs-PAMAM thin film as dengue sensing material in SPR techniques for the future development of dengue diagnostic

Optical properties of chitosan/hydroxyl-functionalized graphene quantum dots thin film for potential optical detection of ferric (III) ion

In this research, the preparation of chitosan and hydroxyl-functionalized graphene quantum dots (HGQDs) composite has been described. The spin coating technique was used to prepare the chitosan/hydroxyl-functionalized graphene quantum dots (Cs/HGQDs) thin film. The Cs/HGQDs thin film was then characterized using the Fourier transform infrared spectroscopy which confirmed the existence of amino groups, carboxylic acid groups, carboxyl groups and hydroxyl groups in Cs/HGQDs. UV–Vis absorption spectroscopy and photoluminescence (PL) were used to study the optical properties of the thin film. The absorption of Cs/HGQDs thin film was high with optical band gap of 3.797 eV. The intensity of PL spectra of the thin film was observed around wavelength of 420 nm. The incorporation of Cs/HGQDs thin film with surface plasmon resonance spectroscopy produced positive responses towards the Fe³⁺ ion solutions of different concentration and it was found that Cs/HGQDs thin film able to detect Fe³⁺ as low as 0.5 ppm with a sensitivity of 0.11396° ppm⁻¹. Subsequently, Cs/HGQDs layer have high potential as sensing layer to detect Fe³⁺ due to high affinity of Fe³⁺ ion towards the thin film with a value of binding affinity constant, K equals to 5.79 ppm⁻¹. Atomic force microscopy was used to observe the surface morphology of the thin film and the result indicates that the thin film is relatively smooth and homogenous which also confirmed the interaction of Fe³⁺ with the thin film. Thus, Cs/HGQDs thin film shows potential for the detection of Fe³⁺ in solution

Highly sensitive surface plasmon resonance optical detection of ferric ion using CTAB/hydroxylated graphene quantum dots thin film

The development of optical sensors for heavy metal ion detection has been rapidly growing; unfortunately, the current methods suffer limitations that led to the emergence of an outstanding technique called surface plasmon resonance (SPR) spectroscopy. In this paper, the performance of the SPR optical sensor in detecting ferric ions (Fe3+) was successfully enhanced by depositing novel cetyltrimethylammonium bromide modified hydroxylated graphene quantum dots (CTAB/HGQDs) onto a gold (Au) thin film using the spin coating technique. Upon exposure to Fe3+, the SPR responses of both CTAB/HGQDs thin film and bare Au thin film were compared and studied, emphasizing the sensitivity, binding affinity, full width at half maxima, signal-to-noise ratio, and data accuracy. The CTAB/HGQDs thin film achieved a high sensitivity value of 29.886° ppm−1 for Fe3+ up to 0.1 ppm. The strong binding affinity was confirmed using the Langmuir isotherm model calculation. To the end, the CTAB/HGQDs thin film was characterized using atomic force microscopy for morphological study, confirming its interaction with Fe3+

Exploration on structural and optical properties of nanocrystalline cellulose/Poly(3,4-Ethylenedioxythiophene) thin film for potential plasmonic sensing application

There are extensive studies on the development of composite solutions involving various types of materials. Therefore, this works aims to incorporate two polymers of nanocrystalline cellulose (NCC) and poly(3,4-ethylenethiophene) (PEDOT) to develop a composite thin film via the spin-coating method. Then, Fourier transform infrared (FTIR) spectroscopy is employed to confirm the functional groups of the NCC/PEDOT thin film. The atomic force microscopy (AFM) results revealed a relatively homogeneous surface with the roughness of the NCC/PEDOT thin film being slightly higher compared with individual thin films. Meanwhile, the ultraviolet/visible (UV/vis) spectrometer evaluated the optical properties of synthesized thin films, where the absorbance peaks can be observed around a wavelength of 220 to 700 nm. An optical band gap of 4.082 eV was obtained for the composite thin film, which is slightly lower as compared with a single material thin film. The NCC/PEDOT thin film was also incorporated into a plasmonic sensor based on the surface plasmon resonance principle to evaluate the potential for sensing mercury ions in an aqueous medium. Resultantly, the NCC/PEDOT thin film shows a positive response in detecting the various concentrations of mercury ions. In conclusion, this work has successfully developed a new sensing layer in fabricating an effective and potential heavy metal ions sensor

Development of biopolymer-poly(3,4-Ethylenedioxythiophene) based thin films and the potential for mercury ion detection using surface plasmon resonance

The global issue caused by agricultural and industrial waste products has driven researchers to develop heavy metal ion sensors for the detection of water pollution. There are numerous works on the development of sensing layers involving different types of materials. Apart from the novelty of material, the effectiveness and efficiency of materials as sensing layers also should be emphasized. Therefore, this works aims to incorporate the biopolymer and conducting polymer materials with surface plasmon resonance sensors for better sensing properties toward heavy metal ions. This thesis suggests two different sensing thin films, chitosan/poly(3,4-ethylenethiophene) (Cs/PEDOT) and nanocrystalline cellulose/poly(3,4-ethylenethiophene) (NCC/PEDOT) for the detection of mercury ions. The structural properties of both thin films were confirmed by Fourier transform infrared (FTIR) spectroscopy by the presence of functional groups of the composites. Moreover, the atomic force microscopy (AFM) shows that the roughness of thin films increased for Cs/PEDOT and NCC/PEDOT thin films, which shows that the surface roughness is influenced by the presence of chitosan and nanocrystalline cellulose. Meanwhile, the optical properties of synthesized thin films were investigated using ultraviolet-visible (UV-Vis) spectroscopy where the absorbance peaks for the thin films can be observed at a wavelength around 220–700 nm. Based on the band gap energy analysis, the values obtained for both thin films are 4.093 eV and 4.082 eV for Cs/PEDOT and NCC/PEDOT thin films, respectively. Next, the proposed thin films have been incorporated with a surface plasmon resonance sensor (SPR) to evaluate the effectiveness and efficiency of sensing mercury ions in an aqueous solution. For Cs/PEDOT thin film, the detection performance showed the sensitivity of 21.9607° ppm–1 and the binding affinity constant value of 204.4990 ppm–1. Meanwhile, the NCC/PEDOT thin film showed higher sensitivity of 48.5193° ppm–1 and the Langmuir isotherm model yielded a higher binding affinity constant with values of 211.8644 ppm–1. The results indicate NCC/PEDOT thin film has a better sensing property compared to Cs/PEDOT thin film in detecting mercury ions. In conclusion, this work has successfully developed a new sensing layer in fabricating an effective and potential heavy metal ions sensor

Development of Biopolymer and Conducting Polymer-Based Optical Sensors for Heavy Metal Ion Detection

Great efforts have been devoted to the invention of environmental sensors as the amount of water pollution has increased in recent decades. Chitosan, cellulose and nanocrystalline cellulose are examples of biopolymers that have been intensively studied due to their potential applications, particularly as sensors. Furthermore, the rapid use of conducting polymer materials as a sensing layer in environmental monitoring has also been developed. Thus, the incorporation of biopolymer and conducting polymer materials with various methods has shown promising potential with sensitively and selectively toward heavy metal ions. In this feature paper, selected recent and updated investigations are reviewed on biopolymer and conducting polymer-based materials in sensors aimed at the detection of heavy metal ions by optical methods. This review intends to provide sufficient evidence of the potential of polymer-based materials as sensing layers, and future outlooks are considered in developing surface plasmon resonance as an excellent and valid sensor for heavy metal ion detection

Development of biopolymer and conducting polymer-based optical sensors for heavy metal ion detection

Great efforts have been devoted to the invention of environmental sensors as the amount of water pollution has increased in recent decades. Chitosan, cellulose and nanocrystalline cellulose are examples of biopolymers that have been intensively studied due to their potential applications, particularly as sensors. Furthermore, the rapid use of conducting polymer materials as a sensing layer in environmental monitoring has also been developed. Thus, the incorporation of biopolymer and conducting polymer materials with various methods has shown promising potential with sensitively and selectively toward heavy metal ions. In this feature paper, selected recent and updated investigations are reviewed on biopolymer and conducting polymer-based materials in sensors aimed at the detection of heavy metal ions by optical methods. This review intends to provide sufficient evidence of the potential of polymer-based materials as sensing layers, and future outlooks are considered in developing surface plasmon resonance as an excellent and valid sensor for heavy metal ion detection

A Review on Carbon Dots: Synthesis, Characterization and Its Application in Optical Sensor for Environmental Monitoring

The development of carbon dots (CDs), either using green or chemical precursors, has inevitably led to their wide range application, from bioimaging to optoelectronic devices. The reported precursors and properties of these CDs have opened new opportunities for the future development of high-quality CDs and applications. Green precursors were classified into fruits, vegetables, flowers, leaves, seeds, stem, crop residues, fungi/bacteria species, and waste products, while the chemical precursors were classified into acid reagents and non-acid reagents. This paper quickly reviews ten years of the synthesis of CDs using green and chemical precursors. The application of CDs as sensing materials in optical sensor techniques for environmental monitoring, including the detection of heavy metal ions, phenol, pesticides, and nitroaromatic explosives, was also discussed in this review. This profound review will offer knowledge for the upcoming community of researchers interested in synthesizing high-quality CDs for various applications

Development of graphene quantum dots-based optical sensor for toxic metal ion detection

About 71% of the Earth’s surface is covered with water. Human beings, animals, and plants need water in order to survive. Therefore, it is one of the most important substances that exist on Earth. However, most of the water resources nowadays are insufficiently clean, since they are contaminated with toxic metal ions due to the improper disposal of pollutants into water through industrial and agricultural activities. These toxic metal ions need to be detected as fast as possible so that the situation will not become more critical and cause more harm in the future. Since then, numerous sensing methods have been proposed, including chemical and optical sensors that aim to detect these toxic metal ions. All of the researchers compete with each other to build sensors with the lowest limit of detection and high sensitivity and selectivity. Graphene quantum dots (GQDs) have emerged as a highly potential sensing material to incorporate with the developed sensors due to the advantages of GQDs. Several recent studies showed that GQDs, functionalized GQDs, and their composites were able to enhance the optical detection of metal ions. The aim of this paper is to review the existing, latest, and updated studies on optical sensing applications of GQDs-based materials toward toxic metal ions and future developments of an excellent GQDs-based SPR sensor as an alternative toxic metal ion sensor