Tailoring of Textural Properties of 3D Reduced Graphene Oxide Composite Monoliths by Using Highly Crosslinked Polymer Particles toward Improved CO₂ Sorption

The main constraint on developing a full potential for CO2 adsorption of 3D composite monoliths made of reduced graphene oxide (rGO) and polymer materials is the lack of control of their textural properties, along with the diffusional limitation to the CO2 adsorption due to the pronounced polymers’ microporosity. In this work, the textural properties of the composites were altered by employing highly crosslinked polymer particles, synthesized by emulsion polymerization in aqueous media. For that aim, waterborne methyl methacrylate (MMA) particles were prepared, in which the crosslinking was induced by using different quantities of divinyl benzene (DVB). Afterward, these particles were combined with rGO platelets and subjected to the reduction-induced self-assembly process. The resulting 3D monolithic porous materials certainly presented improved textural properties, in which the porosity and BET surface area were increased up to 100% with respect to noncrosslinked composites. The crosslinked density of MMA polymer particles was a key parameter controlling the porous properties of the composites. Consequently, higher CO2 uptake than that of neat GO structures and composites made of noncrosslinked MMA polymer particles was attained. This work demonstrates that a proper control of the microstructure of the polymer particles and their facile introduction within rGO self-assembly 3D structures is a powerful tool to tailor the textural properties of the composites toward improved CO2 capture performance

Resembling Graphene/Polymer Aerogel Morphology for Advancing the CO₂/N₂ Selectivity of the Postcombustion CO₂ Capture Process

The separation of CO2 from N2 remains a highly challenging task in postcombustion CO2 capture processes, primarily due to the relatively low CO2 content (3–15%) compared to that of N2 (70%). This challenge is particularly prominent for carbon-based adsorbents that exhibit relatively low selectivity. In this study, we present a successfully implemented strategy to enhance the selectivity of composite aerogels made of reduced graphene oxide (rGO) and functionalized polymer particles. Considering that the CO2/N2 selectivity of the aerogels is affected on the one hand by the surface chemistry (offering more sites for CO2 capture) and fine-tuned microporosity (offering molecular sieve effect), both of these parameters were affected in situ during the synthesis process. The resulting aerogels exhibit improved CO2 adsorption capacity and a significant reduction in N2 adsorption at a temperature of 25 °C and 1 atm, leading to a more than 10-fold increase in selectivity compared to the reference material. This achievement represents the highest selectivity reported thus far for carbon-based adsorbents. Detailed characterization of the aerogel surfaces has revealed an increase in the quantity of surface oxygen functional groups, as well as an augmentation in the fractions of micropores (<2 nm) and small mesopores (<5 nm) as a result of the modified synthesis methodology. Additionally, it was found that the surface morphology of the aerogels has undergone important changes. The reference materials feature a surface rich in curved wrinkles with an approximate diameter of 100 nm, resulting in a selectivity range of 50–100. In contrast, the novel aerogels exhibit a higher degree of oxidation, rendering them stiffer and less elastic, resembling crumpled paper morphology. This transformation, along with the improved functionalization and augmented microporosity in the altered aerogels, has rendered the aerogels almost completely N2-phobic, with selectivity values ranging from 470 to 621. This finding provides experimental evidence for the theoretically predicted relationship between the elasticity of graphene-based adsorbents and their CO2/N2 selectivity performance. It introduces a new perspective on the issue of N2-phobicity. The outstanding performance achieved, including a CO2 adsorption capacity of nearly 2 mmol/g and the highest selectivity of 620, positions these composites as highly promising materials in the field of carbon capture and sequestration (CCS) postcombustion technology

Effect of Chain Architecture on the Compatibility of Block Copolymer/Nanoparticle Blends

The effect of block copolymer chain connectivity on the structure formation in binary blends comprising block copolymer hosts and enthalpically neutralized particle fillers is investigated for linear diblock (AB) and triblock (ABA and BAB) as well as four-arm star copolymer architectures (AB3 and A3B). For particles with approximately constant effective size (defined here as the ratio of filler particle diameter to host polymer radius of gyration), miscibility was observed only within diblock copolymers and within the domains formed by the end blocks of triblock copolymers. The limitation of particle miscibility within the triblock mid-domain is interpreted as a consequence of the entropy loss associated with particle deposition due to the stretched configuration of bridged midblock chains. Particle aggregation was observed in both star copolymer samples irrespective of the architecture of the particle-loaded polymer domain. In the case of particle loading of the branched copolymer domain, this is rationalized as a consequence of the increased effective particle size, whereas the incompatibility of particle fillers in the linear block domain of miktoarm copolymer hosts is interpreted as a result of the coupling of dimensional changes within the microstructure along with the reduced axial compressibility of the particle-free branched domain. The sensitive dependence of the particle compatibility on the chain architecture of the polymer host illustrates a yet unexplored parameter space that will need to be taken into account if particle blends are to be designed with branched or multiblock host copolymer architectures

<i>In vivo</i> toxicological evaluation of polymer brush engineered nanoceria: impact of brush charge

Nanoceria has a broad variety of industrial and pharmacological applications due to its antioxidant activity. Nanoceria can be modified by surface coating with polyelectrolyte brushes. Brushes can increase the surface charge of nanoceria, providing greater aqueous stability while reducing agglomeration. However, surface-coating also behaves as a barrier around nanoceria, affecting its redox equilibrium and, hence, its biological and toxicological properties. In the present study, we examined whether bare nanoceria (CeO2; 80–150 nm) and nanoceria modified by surface polymer brush, using negatively charged polyacrylic acid (CeO2@PAA) and positively charged poly (2-(methacryloyloxy)ethyl-trimethyl-ammonium chloride (CeO2@PMETAC), could induce systemic toxicity. As CeO2 has limited colloidal stability, which might result in vascular occlusion, intraperitoneal injection was used instead of intravenous administration. C57Bl/6 mice were four times injected with three different doses of each nanoceria-based sample (corresponding to 1.8, 5.3 and 16 mg Ce/kg BW/administration) for a total period of 14 days. CeO2@PMETAC induced a significant dose-dependent neutrophilia. Histopathological evaluation showed inflammatory processes in the capsule of liver, kidney, and spleen of animals at all doses of CeO2@PMETAC, and with the highest dose of CeO2@PAA and CeO2. However, none of the nanoceria-based samples tested increased the level of DNA damage or micronuclei in blood cells, even though Ce was detected by inductively coupled plasma mass spectrometry analyses in the bone marrow. Only CeO2@PMETAC induced the presence of megakaryocytes in the spleen. A higher accumulation of Ce in mononuclear phagocyte system organs (liver, spleen and bone marrow) was observed after CeO2@PMETAC treatment compared with CeO2@PAA and CeO2.</p