Development and challenges in finite element modelling of post-installed anchors in concrete

Finite element analysis (FEA) has been used as a successful supplement to experimental testing in various studies for simulation of anchorage behaviour. Throughout the years, researchers have employed different modelling techniques in various FEA packages to capture the behaviour of post-installed anchors. However, the vast amount of knowledge accrued is yet to be reviewed. This article critically reviews all aspects of FEA from pre-processing to post-processing and provides a comprehensive review of published literature on FEA studies for predicting the behaviour of post-installed anchorage systems. Most current efforts focus on investigating failure mechanism of anchors in uncracked concrete under tensile loading. Findings show that developing finite element model for post-installed anchorage in concrete is very challenging due to complex geometrical configuration of anchors, difficulty in modelling concrete–anchor interface and lack of reliable information on selecting material properties and parameters. The analysis identified key gaps in research related to the effect of geometrical simplification, anchor subjected to dynamic loading and anchor performance in cracked concrete which needs attention in future research. This review article is a valuable resource in facilitating future research on assessing the performance of post-installed anchorage in concrete with FEA.</p

Experimental and numerical investigation of screw anchors in large crack width

In predicting the capacity of screw anchors under static tensile loading, the Concrete Capacity (CC) method is the state-of-the-art prediction model which covers concrete cone capacities in uncracked and cracked concrete up to 0.3 mm crack width. However, in seismic applications, anchors may be subjected to large crack widths of up to 0.8 mm. With large crack width, the behaviour of small-sized (typically 6 mm) screw anchors has not been studied. In this study, experimental investigations were conducted for a total of 29 anchors in uncracked and cracked concrete with large crack widths up to 0.8 mm. The experimental results showed that the load-carrying capacity of screw anchors significantly dropped resulting in a reduction factor of 0.13–0.47 for cracked concrete with 0.8 mm crack width (significantly lower than 0.7 assumed by the CC method for a crack width of up to 0.3 mm). This paper focused on developing modelling technique for predicting the performance of screw anchors in cracked concrete with a crack width of up to 0.8 mm since screw anchor in cracked concrete has not been studied using finite element analysis. Three-dimensional finite element models were developed for screw anchors in uncracked and cracked concrete and validated by the experimental results. Further, parametric analysis showed that dilation angle and shape factor are the two most influencing parameters among other of the concrete damage plasticity model.</p

Development and challenges in finite element modelling of post-installed anchors in concrete

Finite element analysis (FEA) has been used as a successful supplement to experimental testing in various studies for simulation of anchorage behaviour. Throughout the years, researchers have employed different modelling techniques in various FEA packages to capture the behaviour of post-installed anchors. However, the vast amount of knowledge accrued is yet to be reviewed. This article critically reviews all aspects of FEA from pre-processing to post-processing and provides a comprehensive review of published literature on FEA studies for predicting the behaviour of post-installed anchorage systems. Most current efforts focus on investigating failure mechanism of anchors in uncracked concrete under tensile loading. Findings show that developing finite element model for post-installed anchorage in concrete is very challenging due to complex geometrical configuration of anchors, difficulty in modelling concrete–anchor interface and lack of reliable information on selecting material properties and parameters. The analysis identified key gaps in research related to the effect of geometrical simplification, anchor subjected to dynamic loading and anchor performance in cracked concrete which needs attention in future research. This review article is a valuable resource in facilitating future research on assessing the performance of post-installed anchorage in concrete with FEA.</p

Tensile Behavior of Small Screw Anchors under Cyclic Crack Openings

Small-sized anchors (typically 6 mm [0.24 in.]) are commonly used for nonstructural applications. There has been increasing demand for seismic performance of fastenings for nonstructural applications; however, there have been no 6 mm (0.24 in.) size screw anchors with seismic prequalification for large crack width. This study investigated the feasibility of small-sized screw anchors to perform under tension loading in crack widths of up to 0.8 mm (0.03 in.). Tension tests were conducted in cracked concrete with varying crack widths (0.3, 0.5, and 0.8 mm [0.01, 0.02, and 0.03 in.]) under monotonic, pulsating, and varying crack width load protocol. Based on the findings of this study, 6 mm (0.24 in.) screw anchors exhibited load drop and slip behavior in large crack width during the residual capacity test, even for anchors with a deeper embedment. Finite element analysis was conducted to investigate the feasibility of a larger-sized thread width to perform in 0.8 mm (0.03 in.) crack width.</p