A fluorescent, reagentless biosensor for ATP, based on malonyl-coenzyme A synthetase

A fluorescent reagentless biosensor for ATP has been developed, based on malonyl-coenzyme A synthetase from Rhodopseudomonas palustris as the protein scaffold and recognition element. Two 5-iodoacetamidotetramethylrhodamines were covalently bound to this protein to provide the readout. This adduct couples ATP binding to a 3.7-fold increase in fluorescence intensity with excitation at 553 nm and emission at 575 nm. It measures ATP concentrations with micromolar sensitivity and is highly selective for ATP relative to ADP. Its ability to monitor enzymatic ATP production or depletion was demonstrated in steady-state kinetic assays in which ATP is a product or substrate, respectively

Development of a range of fluorescent reagentless biosensors for ATP, based on malonyl-coenzyme A synthetase

The range of ATP concentrations that can be measured with a fluorescent reagentless biosensor for ATP has been increased by modulating its affinity for this analyte. The ATP biosensor is an adduct of two tetramethylrhodamines with MatB from Rhodopseudomonas palustris. Mutations were introduced into the binding site to modify ATP binding affinity, while aiming to maintain the concomitant fluorescence signal. Using this signal, the effect of mutations in different parts of the binding site was measured. This mutational analysis revealed three variants in particular, each with a single mutation in the phosphate-binding loop, which had potentially beneficial changes in ATP binding properties but preserving a fluorescence change of ~3-fold on ATP binding. Two variants (T167A and T303A) weakened the binding, changing the dissociation constant from the parent's 6 μM to 123 μM and 42 μM, respectively. Kinetic measurements showed that the effect of these mutations on affinity was by an increase in dissociation rate constants. These variants widen the range of ATP concentration that can be measured readily by this biosensor to >100 μM. In contrast, a third variant, S170A, decreased the dissociation constant of ATP to 3.8 μM and has a fluorescence change of 4.2 on binding ATP. This variant has increased selectivity for ATP over ADP of >200-fold. This had advantages over the parent by increasing sensitivity as well as increasing selectivity during ATP measurements in which ADP is present

Fluorescent single-stranded DNA-binding protein from Plasmodium falciparum as a biosensor for single-stranded DNA

Single-stranded DNA (ssDNA) is a product of many cellular processes that involve double-stranded DNA, for example during DNA replication and repair, and is formed transiently in many others. Measurement of ssDNA formation is fundamental for understanding many such processes. The availability of a fluorescent biosensor for the determination of single-stranded DNA provides an important route to achieve this. Single-stranded DNA binding proteins (SSBs) protect ssDNA from degradation, but can be displaced to allow processing of the ssDNA. Their tight binding of ssDNA means that they are very good candidates for the development of a biosensor. Previously, the single stranded DNA binding protein from Escherichia coli, labeled with a fluorophore, (DCC-EcSSB) was developed and used for this purpose. However, the multiple binding modes of this protein meant that interpretation of DCC-EcSSB fluorescence was potentially complex in terms of determining the amount of ssDNA. Here, we present an improved biosensor, developed using the tetrameric SSB from Plasmodium falciparum as a new scaffold for fluorophore attachment. Each subunit of this tetrameric SSB was labeled with a diethylaminocoumarin fluorophore at a single site on its surface, such that there is a very large, 20-fold, fluorescence increase when it binds to ssDNA. This adduct can be used as a biosensor to report ssDNA formation. Because SSB from this organism has a single mode of binding ssDNA, namely 65-70 bases per tetramer, over a wide range of conditions, the fluorescent SSB allows simple quantitation of ssDNA. The binding is fast, possibly diffusion controlled, and tight (dissociation constant for DCC-PfSSB <5 pM). Its suitability for real-time assays of ssDNA formation was demonstrated by measurement of AddAB helicase activity, unwinding double-stranded DNA

oriD structure controls RepD initiation during rolling-circle replication

Bacterial antibiotic resistance is often carried by circular DNA plasmids that are copied separately from the genomic DNA and can be passed to other bacteria, spreading the resistance. The chloramphenicol-resistance plasmid pC221 from Staphylococcus aureus is duplicated by a process called asymmetric rolling circle replication. It is not fully understood how the replication process is regulated but its initiation requires a plasmid-encoded protein called RepD that nicks one strand of the parent plasmid at the double-stranded origin of replication (oriD). Using magnetic tweezers to control the DNA linking number we found RepD nicking occurred only when DNA was negatively supercoiled and that binding of a non-nicking mutant (RepDY188F) stabilized secondary structure formation at oriD. Quenched-flow experiments showed the inverted complementary repeat sequence, ICRII, within oriD was most important for rapid nicking of intact plasmids. Our results show that cruciform formation at oriD is an important control for initiation of plasmid replication

A single-molecule approach to visualize the unwinding activity of DNA helicases.

Almost all aspects of DNA metabolism involve separation of double-stranded DNA catalyzed by helicases. Observation and measurement of the dynamics of these events at the single-molecule level provide important mechanistic details of helicase activity and give the opportunity to probe aspects that are not revealed in bulk solution measurements. The assay, presented here, provides information about helicase unwinding rates and processivity. Visualization is achieved by using a fluorescent single-stranded DNA-binding protein (SSB), which allows the time course of individual DNA unwinding events to be observed using total internal reflection fluorescence microscopy. Observation of a prototypical helicase, Bacillus subtilis AddAB, shows that the unwinding process consists of bursts of unwinding activity, interspersed with periods of pausing.</p

A single-molecule approach to visualize the unwinding activity of DNA helicases.

Almost all aspects of DNA metabolism involve separation of double-stranded DNA catalyzed by helicases. Observation and measurement of the dynamics of these events at the single-molecule level provide important mechanistic details of helicase activity and give the opportunity to probe aspects that are not revealed in bulk solution measurements. The assay, presented here, provides information about helicase unwinding rates and processivity. Visualization is achieved by using a fluorescent single-stranded DNA-binding protein (SSB), which allows the time course of individual DNA unwinding events to be observed using total internal reflection fluorescence microscopy. Observation of a prototypical helicase, Bacillus subtilis AddAB, shows that the unwinding process consists of bursts of unwinding activity, interspersed with periods of pausing.</p

Development of a reagentless biosensor for inorganic phosphate, applicable over a wide concentration range

A fluorescent reagentless biosensor for inorganic phosphate (Pi), based on the E. coli PstS phosphate binding protein, was redesigned to allow measurements of higher Pi concentrations and at low, substoichiometric concentrations of biosensor. This was achieved by weakening Pi binding of the previous biosensor, and different approaches are described that could enable this change in properties. The readout, providing response to the Pi concentration, is delivered by tetramethylrhodamine fluorescence. In addition to two cysteine mutations for rhodamine labeling at positions 17 and 197, the final variant had an I76G mutation in the hinge region between the two lobes that make up the protein. Upon Pi binding, the lobes rotate on this hinge and the mutation on the hinge lowers affinity ∼200-fold, with a dissociation constant now in the tens to hundreds micromolar range, depending on solution conditions. The signal change on Pi binding was up to 9-fold, depending on pH. The suitability of the biosensor for steady-state ATPase assays was demonstrated with low biosensor usage and its advantage in ability to cope with Pi contamination

Endogenous single-strand DNA breaks at RNA polymerase II promoters in Saccharomyces cerevisiae

Molecular combing and gel electrophoretic studies revealed endogenous nicks with free 3'OH ends at ∼100 kb intervals in the genomic DNA (gDNA) of unperturbed and G1-synchronized Saccharomyces cerevisiae cells. Analysis of the distribution of endogenous nicks by Nick ChIP-chip indicated that these breaks accumulated at active RNA polymerase II (RNAP II) promoters, reminiscent of the promoter-proximal transient DNA breaks of higher eukaryotes. Similar periodicity of endogenous nicks was found within the ribosomal rDNA cluster, involving every ∼10th of the tandemly repeated 9.1 kb units of identical sequence. Nicks were mapped by Southern blotting to a few narrow regions within the affected units. Three of them were overlapping the RNAP II promoters, while the ARS-containing IGS2 region was spared of nicks. By using a highly sensitive reverse-Southwestern blot method to map free DNA ends with 3'OH, nicks were shown to be distinct from other known rDNA breaks and linked to the regulation of rDNA silencing. Nicks in rDNA and the rest of the genome were typically found at the ends of combed DNA molecules, occasionally together with R-loops, comprising a major pool of vulnerable sites that are connected with transcriptional regulation

Deconvoluting AMP-activated protein kinase (AMPK) adenine nucleotide binding and sensing

AMP-activated protein kinase (AMPK) is a central cellular energy sensor that adapts metabolism and growth to the energy state of the cell. AMPK senses the ratio of adenine nucleotides (adenylate energy charge) by competitive binding of AMP, ADP, and ATP to three sites (CBS1, CBS3, and CBS4) in its γ-subunit. Because these three binding sites are functionally interconnected, it remains unclear how nucleotides bind to individual sites, which nucleotides occupy each site under physiological conditions, and how binding to one site affects binding to the other sites. Here, we comprehensively analyze nucleotide binding to wild-type and mutant AMPK protein complexes by quantitative competition assays and by hydrogen-deuterium exchange MS. We also demonstrate that NADPH, in addition to the known AMPK ligand NADH, directly and competitively binds AMPK at the AMP-sensing CBS3 site. Our findings reveal how AMP binding to one site affects the conformation and adenine nucleotide binding at the other two sites and establish CBS3, and not CBS1, as the high affinity exchangeable AMP/ADP/ATP-binding site. We further show that AMP binding at CBS4 increases AMP binding at CBS3 by 2 orders of magnitude and reverses the AMP/ATP preference of CBS3. Together, these results illustrate how the three CBS sites collaborate to enable highly sensitive detection of cellular energy states to maintain the tight ATP homeostastis required for cellular metabolism

Physiologically relevant orthogonal assays for the discovery of small-molecule modulators of WIP1 phosphatase in high-throughput screens.

Wildtype P53-induced phosphatase 1 (WIP1) is a member of the magnesium-dependent serine/threonine protein phosphatase (PPM) family and is induced by P53 in response to DNA damage. In several human cancers, the WIP1 protein is overexpressed, which is generally associated with a worse prognosis. Although WIP1 is an attractive therapeutic target, no potent, selective, and bioactive small-molecule modulator with favorable pharmacokinetics has been reported. Phosphatase enzymes are among the most challenging targets for small molecules because of the difficulty of achieving both modulator selectivity and bioavailability. Another major obstacle has been the availability of robust and physiologically relevant phosphatase assays that are suitable for high-throughput screening. Here, we describe orthogonal biochemical WIP1 activity assays that utilize phosphopeptides from native WIP1 substrates. We optimized an MS assay to quantify the enzymatically dephosphorylated peptide reaction product in a 384-well format. Additionally, a red-shifted fluorescence assay was optimized in a 1,536-well format to enable real-time WIP1 activity measurements through the detection of the orthogonal reaction product, inorganic phosphate. We validated these two optimized assays by quantitative high-throughput screening against the National Center for Advancing Translational Sciences (NCATS) Pharmaceutical Collection and used secondary assays to confirm and evaluate inhibitors identified in the primary screen. Five inhibitors were further tested with an orthogonal WIP1 activity assay and surface plasmon resonance binding studies. Our results validate the application of miniaturized physiologically relevant and orthogonal WIP1 activity assays to discover small-molecule modulators from high-throughput screens