Tuning Morphology of Nanostructured ZIF‑8 on Silica Microspheres and Applications in Liquid Chromatography and Dye Degradation

Zeolitic imidazolate framework-8 (ZIF-8) is one type of metal–organic framework (MOF) with excellent thermal and solvent stability and has been used extensively in separation, catalysis, and gas storage. Supported ZIF-8 structures can offer additional advantages beyond the MOF-only materials. Here, spheres-on-spheres (SOS) silica microspheres are used as support for the nucleation and growth of ZIF-8 nanocrystals. The surface functionalities (−SH, −COOH, and −NH₂) of silica and reaction conditions are investigated for their effects on the ZIF-8 morphology. The use of SOS microspheres results in the formation of highly crystalline ZIF-8 nanostructured shell with varied sizes and shapes, ranging from spherical to cubic and to needle crystals. The SOS@ZIF-8 microspheres are packed into a column and utilized for separation of aromatic molecules on the basis of π–π interaction in high-performance liquid chromatography (HPLC). Furthermore, by thermal treatment in air, ZIF-8 nanocrystals can be transformed into ZnO coating on SOS silica microspheres. The SOS@ZnO microspheres show excellent photocatalytic activity, as measured by degradation of methyl orange in water, when compared to ZnO nanoparticles. This study has demonstrated the facile way of using SOS microspheres to prepare core–shell microspheres and their applications

Zero-gap bipolar membrane electrolyzer for carbon dioxide reduction using acid-tolerant molecular electrocatalysts

The scaling-up of electrochemical CO2 reduction requires circumventing the CO2 loss as carbonates under alkaline conditions. Zero-gap cell configurations with a reverse-bias bipolar membrane (BPM) represent a possible solution, but the catalyst layer in direct contact with the acidic environment of a BPM usually leads to H2 evolution dominating. Here we show that using acid-tolerant Ni molecular electrocatalysts selective (>60%) CO2 reduction can be achieved in a zero-gap BPM device using a pure water and CO2 feed. At a higher current density (100 mA cm-2), CO selectivity decreases, but was still >30%, due to reversible product inhibition. This study demonstrates the importance of developing acid-tolerant catalysts for use in large-scale CO2 reduction devices.</p

Chemical Composition of Aerosol from an E‑Cigarette: A Quantitative Comparison with Cigarette Smoke

There is interest in the relative toxicities of emissions from electronic cigarettes and tobacco cigarettes. Lists of cigarette smoke priority toxicants have been developed to focus regulatory initiatives. However, a comprehensive assessment of e-cigarette chemical emissions including all tobacco smoke Harmful and Potentially Harmful Constituents, and additional toxic species reportedly present in e-cigarette emissions, is lacking. We examined 150 chemical emissions from an e-cigarette (Vype ePen), a reference tobacco cigarette (Ky3R4F), and laboratory air/method blanks. All measurements were conducted by a contract research laboratory using ISO 17025 accredited methods. The data show that it is essential to conduct laboratory air/method measurements when measuring e-cigarette emissions, owing to the combination of low emissions and the associated impact of laboratory background that can lead to false-positive results and overestimates. Of the 150 measurands examined in the e-cigarette aerosol, 104 were not detected and 21 were present due to laboratory background. Of the 25 detected aerosol constituents, 9 were present at levels too low to be quantified and 16 were generated in whole or in part by the e-cigarette. These comprised major e-liquid constituents (nicotine, propylene glycol, and glycerol), recognized impurities in Pharmacopoeia-quality nicotine, and eight thermal decomposition products of propylene glycol or glycerol. By contrast, approximately 100 measurands were detected in mainstream cigarette smoke. Depending on the regulatory list considered and the puffing regime used, the emissions of toxicants identified for regulation were from 82 to >99% lower on a per-puff basis from the e-cigarette compared with those from Ky3R4F. Thus, the aerosol from the e-cigarette is compositionally less complex than cigarette smoke and contains significantly lower levels of toxicants. These data demonstrate that e-cigarettes can be developed that offer the potential for substantially reduced exposure to cigarette toxicants. Further studies are required to establish whether the potential lower consumer exposure to these toxicants will result in tangible public health benefits

Chemical Composition of Aerosol from an E‑Cigarette: A Quantitative Comparison with Cigarette Smoke

There is interest in the relative toxicities of emissions from electronic cigarettes and tobacco cigarettes. Lists of cigarette smoke priority toxicants have been developed to focus regulatory initiatives. However, a comprehensive assessment of e-cigarette chemical emissions including all tobacco smoke Harmful and Potentially Harmful Constituents, and additional toxic species reportedly present in e-cigarette emissions, is lacking. We examined 150 chemical emissions from an e-cigarette (Vype ePen), a reference tobacco cigarette (Ky3R4F), and laboratory air/method blanks. All measurements were conducted by a contract research laboratory using ISO 17025 accredited methods. The data show that it is essential to conduct laboratory air/method measurements when measuring e-cigarette emissions, owing to the combination of low emissions and the associated impact of laboratory background that can lead to false-positive results and overestimates. Of the 150 measurands examined in the e-cigarette aerosol, 104 were not detected and 21 were present due to laboratory background. Of the 25 detected aerosol constituents, 9 were present at levels too low to be quantified and 16 were generated in whole or in part by the e-cigarette. These comprised major e-liquid constituents (nicotine, propylene glycol, and glycerol), recognized impurities in Pharmacopoeia-quality nicotine, and eight thermal decomposition products of propylene glycol or glycerol. By contrast, approximately 100 measurands were detected in mainstream cigarette smoke. Depending on the regulatory list considered and the puffing regime used, the emissions of toxicants identified for regulation were from 82 to >99% lower on a per-puff basis from the e-cigarette compared with those from Ky3R4F. Thus, the aerosol from the e-cigarette is compositionally less complex than cigarette smoke and contains significantly lower levels of toxicants. These data demonstrate that e-cigarettes can be developed that offer the potential for substantially reduced exposure to cigarette toxicants. Further studies are required to establish whether the potential lower consumer exposure to these toxicants will result in tangible public health benefits