6,021 research outputs found
Implementation of Particle Flow Algorithm and Muon Identification
We present the implementation of the Particle Flow Algorithm and the result
of the muon identification developed at the University of Iowa. We use Monte
Carlo samples generated for the benchmark LOI process with the Silicon Detector
design at the International Linear Collider. With the muon identification, an
improved jet energy resolution, good muon efficiency and purity are achieved.Comment: 4 pages, 2 figures, lcws08 at Chicag
Advanced characterization and simulation of SONNE: a fast neutron spectrometer for Solar Probe Plus
SONNE, the SOlar NeutroN Experiment proposed for Solar Probe Plus, is designed to measure solar neutrons from 1-20 MeV and solar gammas from 0.5-10 MeV. SONNE is a double scatter instrument that employs imaging to maximize its signal-to-noise ratio by rejecting neutral particles from non-solar directions. Under the assumption of quiescent or episodic small-flare activity, one can constrain the energy content and power dissipation by fast ions in the low corona. Although the spectrum of protons and ions produced by nanoflaring activity is unknown, we estimate the signal in neutrons and γ−rays that would be present within thirty solar radii, constrained by earlier measurements at 1 AU. Laboratory results and simulations will be presented illustrating the instrument sensitivity and resolving power
Design optimization and performance capabilities of the fast neutron imaging telescope (FNIT)
We describe the design optimization process and performance characterization of a next generation neutron telescope, with imaging and energy measurement capabilities, sensitive to neutrons in the 1-20 MeV energy range. The response of the Fast Neutron Imaging Telescope (FNIT), its efficiency in neutron detection, energy resolution and imaging capabilities were characterized through a combination of lab tests and Monte Carlo simulations. Monte Carlo simulations, together with experimental data, are also being used in the development and testing of the image reconstruction algorithm. FNIT was initially conceived to study solar neutrons as a candidate instrument for the Inner Heliosphere Sentinel (IHS) spacecraft. However, the design of this detector was eventually adapted to locate Special Nuclear Material (SNM) sources for homeland security purposes, by detecting fission neutrons. In either case, the detection principle is based on multiple elastic neutron-proton scatterings in organic scintillator. By reconstructing event locations and measuring the recoil proton energies, the direction and energy spectrum of the primary neutron flux can be determined and neutron sources identified. This paper presents the most recent results arising from our efforts and outlines the performance of the FNIT detector
The Presampler for the Forward and Rear Calorimeter in the ZEUS Detector
The ZEUS detector at HERA has been supplemented with a presampler detector in
front of the forward and rear calorimeters. It consists of a segmented
scintillator array read out with wavelength-shifting fibers. We discuss its
desi gn, construction and performance. Test beam data obtained with a prototype
presampler and the ZEUS prototype calorimeter demonstrate the main function of
this detector, i.e. the correction for the energy lost by an electron
interacting in inactive material in front of the calorimeter.Comment: 20 pages including 16 figure
Enhanced electrical resistivity before N\'eel order in the metals, RCuAs (R= Sm, Gd, Tb and Dy
We report an unusual temperature (T) dependent electrical resistivity()
behavior in a class of ternary intermetallic compounds of the type RCuAs
(R= Rare-earths). For some rare-earths (Sm, Gd, Tb and Dy) with negligible
4f-hybridization, there is a pronounced minimum in (T) far above
respective N\'eel temperatures (T). However, for the rare-earths which are
more prone to exhibit such a (T) minimum due to 4f-covalent mixing and
the Kondo effect, this minimum is depressed. These findings, difficult to
explain within the hither-to-known concepts, present an interesting scenario in
magnetism.Comment: Physical Review Letters (accepted for publication
Exploiting Inter- and Intra-Memory Asymmetries for Data Mapping in Hybrid Tiered-Memories
Modern computing systems are embracing hybrid memory comprising of DRAM and
non-volatile memory (NVM) to combine the best properties of both memory
technologies, achieving low latency, high reliability, and high density. A
prominent characteristic of DRAM-NVM hybrid memory is that it has NVM access
latency much higher than DRAM access latency. We call this inter-memory
asymmetry. We observe that parasitic components on a long bitline are a major
source of high latency in both DRAM and NVM, and a significant factor
contributing to high-voltage operations in NVM, which impact their reliability.
We propose an architectural change, where each long bitline in DRAM and NVM is
split into two segments by an isolation transistor. One segment can be accessed
with lower latency and operating voltage than the other. By introducing tiers,
we enable non-uniform accesses within each memory type (which we call
intra-memory asymmetry), leading to performance and reliability trade-offs in
DRAM-NVM hybrid memory. We extend existing NVM-DRAM OS in three ways. First, we
exploit both inter- and intra-memory asymmetries to allocate and migrate memory
pages between the tiers in DRAM and NVM. Second, we improve the OS's page
allocation decisions by predicting the access intensity of a newly-referenced
memory page in a program and placing it to a matching tier during its initial
allocation. This minimizes page migrations during program execution, lowering
the performance overhead. Third, we propose a solution to migrate pages between
the tiers of the same memory without transferring data over the memory channel,
minimizing channel occupancy and improving performance. Our overall approach,
which we call MNEME, to enable and exploit asymmetries in DRAM-NVM hybrid
tiered memory improves both performance and reliability for both single-core
and multi-programmed workloads.Comment: 15 pages, 29 figures, accepted at ACM SIGPLAN International Symposium
on Memory Managemen
Edge influence on vegetation at natural and anthropogenic edges of boreal forests in Canada and Fennoscandia
Although anthropogenic edges are an important consequence of timber harvesting, edges due to natural disturbances or landscape heterogeneity are also common. Forest edges have been well studied in temperate and tropical forests, but less so in less productive, disturbance-adapted boreal forests. We synthesized data on forest vegetation at edges of boreal forests and compared edge influence among edge types (fire, cut, lake/wetland; old vs. young), forest types (broadleaf vs. coniferous) and geographic regions. Our objectives were to quantify vegetation responses at edges of all types and to compare the strength and extent of edge influence among different types of edges and forests. Research was conducted using the same general sampling design in Alberta, Ontario and Quebec in Canada, and in Sweden and Finland. We conducted a meta-analysis for a variety of response variables including forest structure, deadwood abundance, regeneration, understorey abundance and diversity, and non-vascular plant cover. We also determined the magnitude and distance of edge influence (DEI) using randomization tests. Some edge responses (lower tree basal area, tree canopy and bryophyte cover; more logs; higher regeneration) were significant overall across studies. Edge influence on ground vegetation in boreal forests was generally weak, not very extensive (DEI usually < 20 m) and decreased with time. We found more extensive edge influence at natural edges, at younger edges and in broadleaf forests. The comparison among regions revealed weaker edge influence in Fennoscandian forests. Synthesis. Edges created by forest harvesting do not appear to have as strong, extensive or persistent influence on vegetation in boreal as in tropical or temperate forested ecosystems. We attribute this apparent resistance to shorter canopy heights, inherent heterogeneity in boreal forests and their adaptation to frequent natural disturbance. Nevertheless, notable differences between forest structure responses to natural (fire) and anthropogenic (cut) edges raise concerns about biodiversity implications of extensive creation of anthropogenic edges. By highlighting universal responses to edge influence in boreal forests that are significant irrespective of edge or forest type, and those which vary by edge type, we provide a context for the conservation of boreal forests. Edges created by forest harvesting do not appear to have as strong, extensive or persistent influence on vegetation in boreal as in tropical or temperate forested ecosystems. We attribute this apparent resistance to shorter canopy heights, inherent heterogeneity in boreal forests and their adaptation to frequent natural disturbance. Nevertheless, notable differences between forest structure responses to natural (fire) and anthropogenic (cut) edges raise concerns about biodiversity implications of extensive creation of anthropogenic edges. By highlighting universal responses to edge influence in boreal forests that are significant irrespective of edge or forest type, and those which vary by edge type, we provide a context for the conservation of boreal forests
Improving Phase Change Memory Performance with Data Content Aware Access
A prominent characteristic of write operation in Phase-Change Memory (PCM) is
that its latency and energy are sensitive to the data to be written as well as
the content that is overwritten. We observe that overwriting unknown memory
content can incur significantly higher latency and energy compared to
overwriting known all-zeros or all-ones content. This is because all-zeros or
all-ones content is overwritten by programming the PCM cells only in one
direction, i.e., using either SET or RESET operations, not both. In this paper,
we propose data content aware PCM writes (DATACON), a new mechanism that
reduces the latency and energy of PCM writes by redirecting these requests to
overwrite memory locations containing all-zeros or all-ones. DATACON operates
in three steps. First, it estimates how much a PCM write access would benefit
from overwriting known content (e.g., all-zeros, or all-ones) by
comprehensively considering the number of set bits in the data to be written,
and the energy-latency trade-offs for SET and RESET operations in PCM. Second,
it translates the write address to a physical address within memory that
contains the best type of content to overwrite, and records this translation in
a table for future accesses. We exploit data access locality in workloads to
minimize the address translation overhead. Third, it re-initializes unused
memory locations with known all-zeros or all-ones content in a manner that does
not interfere with regular read and write accesses. DATACON overwrites unknown
content only when it is absolutely necessary to do so. We evaluate DATACON with
workloads from state-of-the-art machine learning applications, SPEC CPU2017,
and NAS Parallel Benchmarks. Results demonstrate that DATACON significantly
improves system performance and memory system energy consumption compared to
the best of performance-oriented state-of-the-art techniques.Comment: 18 pages, 21 figures, accepted at ACM SIGPLAN International Symposium
on Memory Management (ISMM
CRIRES-POP: A library of high resolution spectra in the near-infrared
New instrumental capabilities and the wealth of astrophysical information
extractable from the near-infrared wavelength region have led to a growing
interest in the field of high resolution spectroscopy at 1-5 mu. We aim to
provide a library of observed high-resolution and high signal-to-noise-ratio
near-infrared spectra of stars of various types throughout the
Hertzsprung-Russell diagram. This is needed for the exploration of spectral
features in this wavelength range and for comparison of reference targets with
observations and models.
High quality spectra were obtained using the CRIRES near-infrared
spectrograph at ESO's VLT covering the range from 0.97 to 5.3 mu at high
spectral resolution. Accurate wavelength calibration and correction for of
telluric lines were performed by fitting synthetic transmission spectra for the
Earth's atmosphere to each spectrum individually. We describe the observational
strategy and the current status and content of the library which includes 13
objects. The first examples of finally reduced spectra are presented. This
publication will serve as a reference paper to introduce the library to the
community and explore the extensive amount of material.Comment: accepted for publication in A&A; see also the project webpage
http://www.univie.ac.at/crirespo
- …