Design education: collaboration and cross-disciplinarity [front matter]

The 18th International Conference on Engineering and Product Design Education (E&PDE) was held at the University of Aalborg on the 8th and 9th September 2016. The conference was hosted by the Department of Architecture, Design and Media Technology at the University of Aalborg, Denmark, in close collaboration with the Design Education Special Interest Group (DESIG) of the Design Society, and the Institution of Engineering Designers (IED). The E&PDE conference was initiated in 1999 in the United Kingdom and was consolidated as an international conference in 2004; alternately taking place in the UK and abroad. Its objective is to facilitate the bringing together of people from within education and industry who are interested in sharing expertise on the implementation and analysis of contemporary and developing methodologies in engineering and design education. It provides educators and researchers from product development, engineering and industrial design, together with industry and government representatives, with a platform for discussion on topical educational issues in design education and its future direction

Life cycle assessment comparison of point-of-use water treatment technologies: solar water disinfection (SODIS), boiling water, and chlorination

Numerous different point-of-use (POU) water treatment technologies exist that can remove, reduce or inactivate microbial pathogens present in untreated drinking water. However, there have been uncertainties as to which technology is best suited to rural populations. Environmental impacts of these technologies can bring further threats to rural communities, so the life cycle assessment (LCA) approach is frequently used to compare different POU water treatment technologies. The present study uses LCA to compare three treatment options: solar water disinfection (SODIS) using a Transparent Jerrycan (TJC), boiling, and chlorination. A life cycle inventory database is created for each stage, calculating the embodied energy and transportation energy considering daily reliance for all the technologies. Direct carbon dioxide emission at the point of use of energy/fuel, particulate matter formation and smog formation analysis can help to implement the most appropriate technology. The lifecycle assessment in this study indicates that when considering the environmental impact associated with providing sufficient safe drinking water for a family of six over a period of 6 months, SODIS has been found to have better sustainability credentials as a water treatment technology (6.0 kg CO2e per functional unit) with low contribution in all the three impact categories, followed by chlorination (9.8 kg CO2 e per functional unit) and boiling water (6808 kg CO2e per functional unit).</p

Microbiological evaluation of 5 L- and 20 L-transparent polypropylene buckets for solar water disinfection (SODIS)

Solar water disinfection (SODIS) is an appropriate technology for household treatment of drinking water in low-to-middle-income communities, as it is effective, low cost and easy to use. Nevertheless, uptake is low due partially to the burden of using small volume polyethylene terephthalate bottles (1.5-2 L). A major challenge is to develop a low-cost transparent container for disinfecting larger volumes of water. (2) Methods: This study examines the capability of transparent polypropylene (PP) buckets of 5 L- and 20 L- volume as SODIS containers using three waterborne pathogen indicators: Escherichia coli, MS2-phage and Cryptosporidium parvum. (3) Results: Similar inactivation kinetics were observed under natural sunlight for the inactivation of all three organisms in well water using 5 L- and 20 L-buckets compared to 1.5 L-polyethylene-terephthalate (PET) bottles. The PP materials were exposed to natural and accelerated solar ageing (ISO-16474). UV transmission of the 20 L-buckets remained stable and with physical integrity even after the longest ageing periods (9 months or 900 h of natural or artificial solar UV exposure, respectively). The 5 L-buckets were physically degraded and lost significant UV-transmission, due to the thinner wall compared to the 20 L-bucket. (4) Conclusion: This work demonstrates that the 20 L SODIS bucket technology produces excellent bacterial, viral and protozoan inactivation and is obtained using a simple transparent polypropylene bucket fabricated locally at very low cost ($2.90 USD per unit). The increased bucket volume of 20 L allows for a ten-fold increase in treatment batch volume and can thus more easily provide for the drinking water requirements of most households. The use of buckets in households across low to middle income countries is an already accepted practice.</div