6,292 research outputs found

    Journey of water in pine cones

    Get PDF
    Pine cones fold their scales when it rains to prevent seeds from short-distance dispersal. Given that the scales of pine cones consist of nothing but dead cells, this folding motion is evidently related to structural changes. In this study, the structural characteristics of pine cones are studied on micro-/macro-scale using various imaging instruments. Raindrops fall along the outer scales to the three layers (bract scales, fibers and innermost lignified structure) of inner pine cones. However, not all the layers but only the bract scales get wet and then, most raindrops move to the inner scales. These systems reduce the amount of water used and minimize the time spent on structural changes. The result shows that the pine cones have structural advantages that could influence the efficient motion of pine cones. This study provides new insights to understand the motion of pine cones and would be used to design a novel water transport system.119Ysciescopu

    Electrical property improvements of high-k gate oxide by in situ nitrogen incorporation during atomic layer deposition

    Get PDF
    Atomic layer deposition (ALD) process for oxynitrides of high-k gate dielectrics employing NH4OH as a single source for reactants, water and NH3, was studied. By this method, nitrogen was incorporated up to 1-3 at. % for ALD Al2O3 and Ta2O5 films from metal organic precursors. A comparative study with water based ALD showed that the electrical properties were improved. The leakage current of oxide films from NH4OH based ALD had been reduced and, more importantly, the dielectric strength was found to be enhanced by more than two orders of magnitude from a time dependent dielectric breakdown measurement. (c) 2007 American Institute of Physics.X119sciescopu

    High performance thin film transistor with low temperature atomic layer deposition nitrogen-doped ZnO

    Get PDF
    High performance thin film transistor (TFT) with atomic layer deposition (ALD) nitrogen doped ZnO (ZnO:N) as an active layer is demonstrated. The electrical properties of ZnO thin films were effectively controlled by in situ nitrogen doping using NH4OH as a source for reactants. Especially, the electron concentration in ZnO was lowered to below 10(15) cm(-3). Good device characteristics were obtained from the inverted staggered type TFTs with ZnO:N channel and ALD Al2O3 gate insulator; mu(sat)=6.7 cm(2)/V s, I-off=2.03x10(-12) A, I-on/off=9.46x10(7), and subthreshold swing=0.67 V/decade. The entire TFT fabrication processes were carried out at below 150 degrees C, which is a favorable process for plastic based flexible display. (C) 2007 American Institute of Physics.X11126sciescopu

    Association between activities related to routes of infection and clinical manifestations of melioidosis.

    Get PDF
    We sought associations between route of infection by Burkholderia pseudomallei and clinical manifestations in 330 cases of melioidosis in northeast Thailand using bivariate multivariable logistic regression models. Activities related to skin inoculation were negatively associated with bacteraemia, activities related to ingestion were associated with bacteraemia, and activities related to inhalation were associated with pneumonia. Our study suggests that route of infection is one of the factors related to clinical manifestations of melioidosis

    Measurement of real pulsatile blood flow using x-ray PIV technique with CO2 microbubbles

    Get PDF
    Synchrotron X-ray imaging technique has been used to investigate biofluid flows in a non-destructive manner. This study aims to investigate the feasibility of the X-ray PIV technique with CO2 microbubbles as flow tracer for measurement of pulsatile blood flows under in vivo conditions. The traceability of CO2 microbubbles in a pulsatile flow was demonstrated through in vitro experiment. A rat extracorporeal bypass loop was used by connecting a tube between the abdominal aorta and jugular vein of a rat to obtain hemodynamic information of actual pulsatile blood flows without changing the hemorheological properties. The decrease in image contrast of the surrounding tissue was also investigated for in vivo applications of the proposed technique. This technique could be used to accurately measure whole velocity field information of real pulsatile blood flows and has strong potential for hemodynamic diagnosis of cardiovascular diseases.1155Ysciescopu

    Journey of water in pine cones

    Get PDF
    1

    High yield synthesis of graphene quantum dots from biomass waste as a highly selective probe for Fe3+ sensing

    Get PDF
    Graphene quantum dots (GQDs), a novel type of zero-dimensional fluorescent materials, have gained considerable attention owing to their unique optical properties, size and quantum confinement. However, their high cost and low yield remain open challenges for practical applications. In this work, a low cost, green and renewable biomass resource is utilised for the high yield synthesis of GQDs via microwave treatment. The synthesis approach involves oxidative cutting of short range ordered carbon derived from pyrolysis of biomass waste. The GQDs are successfully synthesised with a high yield of over 84%, the highest value reported to date for biomass derived GQDs. As prepared GQDs are highly hydrophilic and exhibit unique excitation independent photoluminescence emission, attributed to their single-emission fluorescence centre. As prepared GQDs are further modified by simple hydrothermal treatment and exhibit pronounced optical properties with a high quantum yield of 0.23. These modified GQDs are used for the highly selective and sensitive sensing of ferric ions (Fe3+). A sensitive sensor is prepared for the selective detection of Fe3+ ions with a detection limit of as low as 2.5 × 10–6 M. The utilisation of renewable resource along with facile microwave treatment paves the way to sustainable, high yield and cost-effective synthesis of GQDs for practical applications

    Synthesis of horizontally aligned ZnO nanowires localized at terrace edges and application for high sensitivity gas sensor

    Get PDF
    We developed step edge decoration method for the fabrication of semiconductor ZnO nanodots and nanowires using pulsed laser deposition. We synthesized high quality ZnO nanowires with the small diameter of about 20 nm and the uniform interval of about 80 nm between each nanowire, which has a simple structure for the formation of contact electrodes. The ZnO nanowire-based sensor was prepared only with the simple process of a gold electrode formation. The ZnO nanowire-based sensor exhibited the high surface-to-volume ratio of 58.6 mu m(-1) and the significantly high sensitivity of about 10 even for the low ethanol concentration of 0.2 ppm.open115860sciescopu

    Evaluation of the discrete energy levels of individual ZnO nanorod single-quantum-well structures using near-field ultraviolet photoluminescence spectroscopy

    Get PDF
    Spatially and spectrally resolved photoluminescence imaging of individual ZnO/ZnMgO nanorod single-quantum-well structures (SQWs) with a spatial resolution of 55 nm was performed using the optical near-field technique with a metallized UV fiber probe. Using excitation power density-dependent photoluminescence spectra of a ZnO/ZnMgO SQW nanorod, we observed the discrete energy levels in a ZnO quantum-well layer. (C) 2004 American Institute of Physics.open112930sciescopu
    corecore