23 research outputs found
DC/DC converter for offshore DC collection network
Large wind farms, especially large offshore wind farms, present a challenge for the electrical networks that will provide interconnection of turbines and onward transmission to the onshore power network. High wind farm capacity combined with a move to larger wind turbines will result in a large geographical footprint requiring a substantial sub-sea power network to provide internal interconnection. While advanced HVDC transmission has addressed the issue of long-distance transmission, internal wind farm power networks have seen relatively little innovation. Recent studies have highlighted the potential benefits of DC collection networks. First with appropriate selection of DC voltage, reduced losses can be expected. In addition, the size and weight of the electrical plant may also be reduced through the use of medium- or high-frequency transformers to step up the generator output voltage for connection to a medium-voltage network suitable for wide-area interconnection. However, achieving DC/DC conversion at the required voltage and power levels presents a significant challenge for wind-turbine power electronics.This thesis first proposes a modular DC/DC converter with input-parallel output-series connection, consisting of full-bridge DC/DC modules. A new master-slave control scheme is developed to ensure power sharing under all operating conditions, including during failure of a master module by allowing the status of master module to be reallocated to another healthy module. Secondly, a novel modular DC/DC converter with input-series-input-parallel output-series connection is presented. In addition, a robust control scheme is developed to ensure power sharing between practical modules even where modules have mismatched parameters or when there is a faulted module. Further, the control strategy is able to isolate faulted modules to ensure fault ride-through during internal module faults, whilst maintaining good transient performance. The ISIPOS connection is then applied to a converter with bidirectional power flow capability, realised using dual-active bridge modules.The small- and large-signal analyses of the proposed converters are performed in order to deduce the control structure for the converter input and output stages. Simulation and experimental results demonstrate and validate the proposed converters and associated control schemes.Large wind farms, especially large offshore wind farms, present a challenge for the electrical networks that will provide interconnection of turbines and onward transmission to the onshore power network. High wind farm capacity combined with a move to larger wind turbines will result in a large geographical footprint requiring a substantial sub-sea power network to provide internal interconnection. While advanced HVDC transmission has addressed the issue of long-distance transmission, internal wind farm power networks have seen relatively little innovation. Recent studies have highlighted the potential benefits of DC collection networks. First with appropriate selection of DC voltage, reduced losses can be expected. In addition, the size and weight of the electrical plant may also be reduced through the use of medium- or high-frequency transformers to step up the generator output voltage for connection to a medium-voltage network suitable for wide-area interconnection. However, achieving DC/DC conversion at the required voltage and power levels presents a significant challenge for wind-turbine power electronics.This thesis first proposes a modular DC/DC converter with input-parallel output-series connection, consisting of full-bridge DC/DC modules. A new master-slave control scheme is developed to ensure power sharing under all operating conditions, including during failure of a master module by allowing the status of master module to be reallocated to another healthy module. Secondly, a novel modular DC/DC converter with input-series-input-parallel output-series connection is presented. In addition, a robust control scheme is developed to ensure power sharing between practical modules even where modules have mismatched parameters or when there is a faulted module. Further, the control strategy is able to isolate faulted modules to ensure fault ride-through during internal module faults, whilst maintaining good transient performance. The ISIPOS connection is then applied to a converter with bidirectional power flow capability, realised using dual-active bridge modules.The small- and large-signal analyses of the proposed converters are performed in order to deduce the control structure for the converter input and output stages. Simulation and experimental results demonstrate and validate the proposed converters and associated control schemes
DC collection networks for offshore generation
Onshore wind farms can now be regarded as a mature technology, capable of providing increasing levels of clean energy. The development of offshore wind technology will provide the ability to harness much larger wind energy resource. Offshore wind arrays present many new challenges including the electrical power system which provides the internal collection system and the connection to the on-shore power network. For remote offshore wind farms, high voltage direct current (HVDC) transmission will be required to transmit power from the wind farm to the shore. The use of HVDC has the effect of decoupling the wind farms internal collection network from the rest of the power grid, thereby removing the requirement for a conventional alternating current (AC) network. This paper discusses the use of a direct current (DC) collection system for offshore wind farms, with particulars emphasis of DC-DC converter requirements. The proposed converter is validated by the simulation model and the performances e.g. switching losses, conduction losses are investigated
Modular input-parallel-output-series DC/DC converter control with fault detection and redundancy
Large offshore wind farms will require an extensive sub-sea power network to provide internal interconnection. Present solutions are based around conventional medium-voltage AC architectures. This paper proposes an alternative DC collection network based around modular DC/DC converters with input-parallel-output-series (IPOS) connection. Small-signal analysis of the converter is presented, to assist in control scheme development for the converter input and output stages. A Lyapunov controller is embedded within the conventional output voltage sharing control loop. A master-slave control scheme is proposed to ensure power sharing under a range of operating conditions, and provides fault-tolerant operation since the status of 'master' can be reallocated in the event that the present 'master' module fails
Active power sharing in input-series-input-parallel output-series connected DC/DC converters
A high-capacity DC/DC converter with novel input-series-input-parallel output-series connection and with autonomous power sharing between modules is proposed. The proposed scheme is well suited for large-scale wind farm DC collection networks, as it avoids the charging current issues associated with its AC counterpart, and offers lower losses and reduced size and weight when a medium- or high-frequency transformer is used. Small-signal analysis is used to derive the control structures for the converter input and output stages. The proposed control scheme is validated through simulation and experimentation, including demonstration of autonomous power sharing between modules under several operating conditions
Modular input-series-input-parallel output-series DC/DC converter control with fault detection and redundancy
A novel high-power modular input-series-input-parallel output-series connected DC/DC converter for medium-voltage application is proposed. Emphasis has been placed on power sharing control to compensate parameter mismatches and achieve equal power distribution between modules. Converter control is extended to achieve fault-tolerant operation by exploiting modularity to provide redundancy in the event of any failure. The proposed control scheme is validated through application-level simulations and scaled-down experiments to testify the reliability of the proposed control for ensuring power sharing between modules under a range of operating conditions. The results validate the proposed converter and associated control scheme indicating this to be a promising topology for high-power medium-voltage applications
Wind turbine gearbox ice sensing and condition monitoring for fault prognosis and diagnosis
The gearbox is seen as one of the most important assets of a wind turbine, so a major concern is how to keep it running smoothly to maximise its service time and reduce the cost. However, wind turbines are often located at remote locations where icing is possible and likely, e.g. high altitudes or cold regions. This challenges the wind turbine stability and causes a variety of problems. Furthermore, rapid expansion of wind energy, along with high operation and maintenance costs, all lead to the need for a condition monitoring system which can offer diagnostics of present condition and prognostics of future condition to improve the reliability of wind turbine and reduce the cost of unscheduled maintenances and unexpected failures. The proposed approach is demonstrated by using a Bayesian Belief Network and Dynamic Bayesian Network under LabVIEW and GeNIe respectively. The proposed procedure is applied on a wind turbine gearbox model to show its feasibility
Modular inputāparallel outputāseries DC/DC converter control with fault detection and redundancy
Medium-voltage DC/DC converter for offshore wind collection grid
A novel modular DC/DC converter with input-series-input-parallel output-series connection to realise a DC collection power network for large-scale wind farms is presented. The proposed topology uses interconnection of multiple modular cells with low rated voltage and power to enable operation with high voltage at the input and output. Low rated power of individual modules in the proposed DC/DC converter permits the use of a high-frequency ac link, resulting in a significant reduction in transformer size and weight, which makes deployment of DC collection networks in offshore wind farm applications more feasible and effective. In addition, a robust control scheme is developed to ensure power sharing between practical modules with parameter mismatch and during transient conditions. Small- and large-signal analyses are performed in order to deduce the control structure for the converter input and output stages. Simulation and experimental results demonstrate and validate the proposed converter and associated control scheme
Earthquake prediction from China's mobile gravity data
The relation between plate tectonics and earthquake evolution is analyzed systematically on the basis of 1998ā2010 absolute and relative gravity data from the Crustal Movement Observation Network of China. Most earthquakes originated in the plate boundary or within the fault zone. Tectonic deformation was most intense and exhibited discontinuity within the tectonically active fault zone because of the differential movement; the stress accumulation produced an abrupt gravity change, which was further enhanced by the earthquake. The gravity data from mainland China since 2000 obviously reflected five major earthquakes (MsĀ >Ā 7), all of which were better reflected than before 2000. Regional gravity anomalies and a gravity gradient change were observed in the area around the epicenter about 2 or 3 years before the earthquake occurred, suggesting that gravity change may be a seismic precursor. Furthermore, in this study, the medium-term predictions of the Ms7.3 Yutian, Ms8.0 Wenchuan, and Ms7.0 Lushan earthquakes are analytically presented and evaluated, especially to estimate location of earthquake
Effects of dietary polyherbal mixtures on growth performance, antioxidant capacity, immune function and jejunal health of yellow-feathered broilers
ABSTRACT: This study aimed to investigate the effects of polyherbal mixtures (PHM) on growth performance, antioxidant capacities, immune function, and intestinal health in yellow-feathered broilers. PHM is composed of five traditional Chinese medicine herbs (Portulaca oleracea L., Radix Sophora flavescens, Thalictrum glandulosissimum, Terra flava usta, and Pogostemon cablin). A total of 270 one-day-old yellow-feathered broilers were randomly allotted into 3 treatments for a 42-d feeding trial, each with 6 replicates of 15 birds. The dietary treatments consisted of a basal diet (CON), a basal diet supplemented with 50āmg/kg chlortetracycline (CTC), and a basal diet supplemented with 1000āmg/kg PHM. The results showed that dietary PHM supplementation increased body weight, ADG, and decreased F/G compared to the CON. PHM also increased spleen index and mRNA expression of IL-4 (d 21), and thymus index, serum IgA (d 42) and IgG, IL-4 and sIgA in jejunal mucosa (d 21 and 42), but decreased serum IFN-Ī³ and mRNA expression of IFN-Ī³ (d 21 and 42). In addition, PHM increased serum SOD, GSH-Px (d 21 and 42) and T-AOC (d 42), but decreased the content of serum MDA (d 21), the up-regulated mRNA expression of GSH-Px, CAT (d 21), SOD and CAT (d 42). Furthermore, PHM also improved the intestinal epithelial barrier indicators by the up-regulated mRNA expression of CLDN-1, OCLN (d 21 and 42) and ZO-1 (d 21), and the increased of villus height and villus height to crypt depth in jejunum (d 42). The high-throughput sequencing results showed that dietary PHM supplementation increased the alpha diversity and relative abundance of Oscillospira and Ruminococcus (d 21) and Lactobacillus (d 42), whereas decreasing that of Enterococcus (d 21) compared with CON. PICRUSt analysis revealed that metabolic pathways of carbohydrate, energy, lipid, cofactors, and vitamins were significantly enriched in the PHM group. Spearman's correlation analysis revealed that the genera Lactobacillus, Enterococcus, Ruminococcus, Oscillospira, and Faecalibacterium were related to growth performance, intestinal integrity, immune-related factors, antioxidant indices, and tight junction proteins. In conclusion, the results indicated that dietary PHM supplementation improved growth performance and immune status of yellow-feathered broilers by enhancing antioxidant capacities, barrier function, and modulated jejunal microbial communities. PHM used in our study has the potential to replace prophylactic antibiotic use in poultry production systems