255,562 research outputs found
Production of regional 1 km x 1 km water vapor fields through the integration of GPS and MODIS data
<p>Atmospheric water vapor is a crucial element in weather, climate and hydrology. With the recent advance in Global Positioning System (GPS) Meteorology, ground-based GPS has become an operational tool that can measure precipitable water vapor (PWV) with high accuracy (1~1.5mm) during all-weathers, and with high temporal resolution (e.g. 5 minutes) at low cost. But the spatial coverage of GPS receivers is limited, and restricts its applications. At present, two NASA Moderate Resolution Imaging Spectroradiometer (MODIS) can provide global coverage 2D water vapor field with a spatial resolution of 1 km × 1 km (at nadir) every 2 days, and at many latitudes can provide water vapor fields every 90 minutes, 4 times a day. The disadvantages of MODIS water vapor products are: 1). A systematic uncertainty of 5-10% is expected [Gao et al., 2003; Li et al., 2003]; 2). Since the MODIS water vapor retrieval relies on observations of water vapor attenuation of near Infrared (IR) solar radiation reflected by surfaces and clouds, it is sensitive to the presence of clouds. The frequency and the percentage of cloud free conditions at mid-latitudes is only 15-30% on average [Li et al., 2004]. Therefore, in order to extract a water vapor field above the Earth’s surface, an attempt needs to be made to fill in the cloudy pixels.</p>
<p>In this paper, an inter-comparison between MODIS (collection 4) and GPS PWV products was performed in the region of the Southern California Integrated GPS Network (SCIGN). It is shown that MODIS appeared to overestimate PWV against GPS with a scale factor of 1.05 and a zero-offset of –0.7 mm. Taking into account the small standard deviation of the linear fit model, a GPS-derived correction linear fit model was proposed to calibrate MODIS PWV products, and a better agreement was achieved. In order to produce regional 1 km × 1 km water vapor fields, an integration approach was proposed: Firstly, MODIS near IR water vapor was calibrated using GPS data; secondly, an improved inverse distance weighted interpolation method (IIDW) was applied to fill in the cloudy pixels; thirdly, the densified water vapor field was validated using GPS data. It is shown that the integration approach was promising. After correction, MODIS and GPS PWV agreed to within 1.6 mm in terms of standard deviations using appropriate extent and power parameters of IIDW, and the coverage of water vapor fields increased by up to 21.6%.
In addition, for the first time, spatial structure functions were derived from MODIS near IR water vapor, and large water vapor variations were observed from time to time.</p>
Light Hadron Physics at the B Factories
We report measurements of hadronic final states produced in
annihilations from the BaBar and Belle experiments. In particular, we present
cross sections measured in several different processes, including two-photon
physics, Initial-State Radiation, and exclusive hadron productions at
center-of-mass energies near 10.58 GeV. Results are compared with theoretical
predictions.Comment: Parallel talk at ICHEP08, Philadelphia, USA, July 2008. 4 pages,
LaTeX, 12 eps figure
Anisotropy and interaction effects of strongly strained SrIrO3 thin films
Magneto-transport properties of SrIrO thin films epitaxially grown on
SrTiO, using reactive RF sputtering, are investigated. A large anisotropy
between the in-plane and the out-of-plane resistivities is found, as well as a
signature of the substrate cubic to tetragonal transition. Both observations
result from the structural distortion associated to the epitaxial strain. The
low-temperature and field dependences of the Hall number are interpreted as due
to the contribution of Coulomb interactions to weak localization, evidencing
the strong correlations in this material. The introduction of a contribution
from magnetic scatters, in the analysis of magnetoconductance in the weakly
localized regime, is proposed as an alternative to an anomalously large
temperature dependence of the Land\'{e} coefficient
Error Patterns
In coding theory the problem of decoding focuses on error vectors. In the simplest situation code words are -vectors, as are the received messages and the error vectors. Comparison of a received word with the code words yields a set of error vectors. In deciding on the original code word, usually the one for which the error vector has minimum Hamming weight is chosen. In this note some remarks are made on the problem of the elements 1 in the error vector, that may enable unique decoding, in case two or more code words have the same Hamming distance to the received message word, thus turning error detection into error correction. The essentially new aspect is that code words, message words and error vectors are put in one-one correspondence with graphs
Discussion on `Characterization of 1-3 piezoelectric polymer composites - a numerical and analytical evaluation procedure for thickness mode vibrations' by C.V. Madhusudhana Rao, G. Prasad, Condens. Matter Phys., 2010, Vol.13, No.1, 13703
In the paper entitled "Characterization of 1-3 piezoelectric polymer
composites - a numerical and analytical evaluation procedure for thickness mode
vibrations", the dependence of the thickness electromechanical coupling
coefficient on the aspect ratio of piezoceramic fibers is studied by finite
element simulation for various volume fractions of piezoceramic fibers in a 1-3
composite. The accuracy of the results is questionable because the boundary
condition claiming that `predefined displacements are applied perpendicularly
on plane on all nodes' is not suitable for the analysis of 1-3 composite
with comparatively large aspect ratio from 0.2 to 1. A discussion regarding
this problem and the suggested corrections are presented in this paper.Comment: 4 pages, 3 figure
- …