Special Issue: Biochemical and thermochemical conversion processes of lignocellulosic biomass fractionated streams

Global consumption of materials such as forest resources, fossil fuels, earth metals and minerals are expected to double in the next 30 years, while annual waste production is estimated to increase by approximately 70% by 2050 [1]. Keeping the resource consumption within planetary boundaries, we strive to minimize the carbon and environmental footprint and concurrently double the waste material use in the coming decades. Preventing food waste from being generated could have a major impact on waste collection systems and on the capacity of bio-waste management facilities worldwide [2]. Therefore, sustainable food waste management is a key part of any green business strategy to convert food waste into green fuels

Investigation of different pretreatment methods of Mediterranean-type ecosystem agricultural residues: characterisation of pretreatment products, high-solids enzymatic hydrolysis and bioethanol production

<p>Agricultural and agro-industrial lignocellulosic residues represent an important renewable resource for the production of fuels and chemicals towards a bio-based economy. Olive pruning, vineyard pruning and almond shells are important residues from agricultural activities in Mediterranean-type ecosystems. In the current work, bioethanol production from the above three types of agro-residues was studied, focusing on the effect of different pretreatment methods on enzymatic saccharrification efficiency of cellulose and production of second-generation bioethanol. Dilute acid, hydrothermal and steam explosion pretreatments were compared in order to remove hemicellulose and facilitate the subsequent enzymatic hydrolysis of the hemicellulose-deficient biomass to glucose. Enzymatic hydrolysis was performed in a free-fall mixing reactor enabling high solids loading of 23% w/w. This allowed hydrolysis of up to 67% of available cellulose in almond shells and close to 50% in olive pruning samples, and facilitated high ethanol production in the subsequent fermentation step; the highest ethanol concentrations achieved were 47.8 g/L for almond shells after steam explosion and 42 g/L for hydrothermally pretreated olive pruning residue.</p

DataSheet1_Fine-Tuned Enzymatic Hydrolysis of Organosolv Pretreated Forest Materials for the Efficient Production of Cellobiose.DOCX

<p>Non-digestible oligosaccharides (NDOs) are likely prebiotic candidates that have been related to the prevention of intestinal infections and other disorders for both humans and animals. Lignocellulosic biomass is the largest carbon source in the biosphere, therefore cello-oligosacharides (COS), especially cellobiose, are potentially the most widely available choice of NDOs. Production of COS and cellobiose with enzymes offers numerous benefits over acid-catalyzed processes, as it is milder, environmentally friendly and produces fewer by-products. Cellobiohydrolases (CBHs) and a class of endoglucanases (EGs), namely processive EGs, are key enzymes for the production of COS, as they have higher preference toward glycosidic bonds near the end of cellulose chains and are able to release soluble products. In this work, we describe the heterologous expression and characterization of two CBHs from the filamentous fungus Thermothelomyces thermophila, as well as their synergism with proccessive EGs for cellobiose release from organosolv pretreated spruce and birch. The properties, inhibition kinetics and substrate specific activities for each enzyme are described in detail. The results show that a combination of EGs belonging to Glycosyl hydrolase families 5, 6, and 9, with a CBHI and CBHII in appropriate proportions, can enhance the production of COS from forest materials, underpinning the potential of these biocatalysts in the production of NDOs.</p

MOESM1 of A comparative study of the enzymatic hydrolysis of batch organosolv-pretreated birch and spruce biomass

Additional file 1: Figure S1. Effects of the individual pretreatment variables on the saccharification yields. Ethanol concentration (50 or 60%), size of the wood chips employed (<1 mm or <4 mm), the presence or the absence of an acid catalyst (H2SO4) (0 or 1%), and the duration of pretreatment (60 min or 103 min). Open symbols: birch; filled symbols: spruce. Table S1. Hydrolytic yields reported in the literature using Cellic CTec2 for various pretreatment methods

Prediction of yields and composition of char from fast pyrolysis of commercial lignocellulosic materials, organosolv fractionated and torrefied olive stones

This study investigated the fast pyrolysis behaviour of torrefied olive stones, fractionated olive stones and lignocellulosic commercial compounds. Olive stones were reacted in a continuous industrial torrefaction unit. The olive stones were also fractionated into their main components in an organosolv reactor at temperatures from 170 to 190 ◦C in both the presence and absence of an acidic catalyst. All samples were reacted in a wire mesh reactor at different temperatures (800–1150 ◦C) and heating rates (400–1150 ◦C/s), and the solid product was characterised for its yield, morphology, and elemental composition. The char yields from fast pyrolysis of commercially available cellulose, hemicelluloses, and lignin were compared with yields of fractionated olive stones. A model was developed to compare the measured yields of olive stones with the predicted yields using fractionated or commercial components. The presence of acid during fractionation had a stronger effect than the temperature, particularly on the lignin fraction. The fractionated lignocellulosic compounds provided more accurate predictions of the char yields of olive stones, as compared to the commercial lignocellulosic compounds. The fractionation at 180 ◦C without acid catalyst gave the cellulose, hemicellulose, and lignin with highest degree of purity and resulted in the most accurate predictions of the experimental yields of olive stones. The results showed that interactions between the lignocellulosic components were not significant. The char yield of each fractioned compound and non-treated olive stones could be accurately predicted from the lignocellulosic content which has importance for biorefinery applications in which each fraction is used as a value-added product

Structural and thermal characterization of novel organosolv lignins from wood and herbaceous sources

This study demonstrates the effects of structural variations of lignins isolated via an organosolv process from different woody and herbaceous feedstocks on their thermal stability profiles. The organosolv lignins were first analysed for impurities, and structural features were determined using the default set of gel permeation chromatography, FT-IR spectroscopy, quantitative 31P NMR spectroscopy and semi-quantitative 1H-13C HSQC analysis. Pyrolysis-, O2- and CO2-reactivity of the organosolv lignins were investigated by thermogravimetric analysis (TGA), and volatile formation in various heating cycles was mapped by head-space GC-MS analysis. Revealed reactivities were correlated to the presence of identified impurities and structural features typical for the organosolv lignins. Data suggest that thermogravimetric analysis can eventually be used to delineate a lignin character when basic information regarding its isolation method is available

A strong enhancement of corrosion and wear resistance of polyurethane-based coating by chemically grafting of organosolv lignin

Corrosion and wear pose significant challenges to equipment operating in harsh environments. Thus, protective coatings are needed. Anti-corrosion and anti-wear coatings are traditionally fossil-based and often contain environmentally harmful additives. Achieving anti-corrosion and anti-wear coatings based on environmentally benign and sustainable materials is important and a significant challenge. This work focused on the development of organosolv lignin-based polyurethane (OS_lignin-PU) coatings. The coatings were synthesised and evaluated for corrosion protection using electrochemical impedance spectroscopy (EIS) and for wear properties using nanoindentation and nano scratch measurements. EIS revealed that the optimal lignin content for corrosion protection purposes in the OS_lignin-PU coatings was 15 wt%. Moreover, addition of 15 wt% lignin to the OS_lignin-PU coatings also enhanced their wear resistance, as evidenced by reduced thickness loss during tribometer tests. The nano scratch measurements revealed that OS_lignin-PU coatings containing 15 wt% lignin exhibited the lowest scratch depth and friction coefficient. It is found that the developed lignin-containing coating exhibits remarkable corrosion and wear resistance, making it a promising sustainable material in various applications for pursuing sustainable development.</p