Potential-Dependent Ionomer Rearrangement on the Pt Surface in Polymer Electrolyte Membrane Fuel Cells

The interface between the catalyst and the ionomer in the catalyst layer of polymer electrolyte membrane fuel cells (PEMFCs) has been a subject of keen interest, but its effect on durability has not been fully understood due to the complexity of the catalyst layer structure. Herein, we utilize a Pt nanoparticle (NP) array electrode fabricated using a block copolymer template as the platform for a focused investigation of the interfacial change between the Nafion thin film and the Pt NP under a constant potential. A set of analyses for the electrodes treated with various potentials reveals that the Nafion thin film becomes densely packed at the intermediate potentials (0.4 and 0.7 V), indicating an increased ionomer–catalyst interaction due to the positive charges formed at the Pt surface at these potentials. Even for a practical PEMFC single cell, we demonstrate that the potential holding at the intermediate potentials increases ionomer adsorption to the Pt surface and the oxygen transport resistance, negatively impacting its power performance. This work provides fresh insight into the mechanism behind the performance fade in PEMFCs caused by potential-dependent ionomer rearrangement

Anode Reinforcement by Polydopamine Glue in Anion Exchange Membrane Water Electrolysis

Durable catalyst layers (CLs) are essential for the commercialization of anion exchange membrane water electrolyzers (AEMWEs). However, the insufficient binding strengths of typical anion exchange ionomers often lead to CL disintegration and detachment from porous transport layers, resulting in rapid performance deterioration during the early stage of operation. Herein, coating the anode CL with polydopamine (PDA) is proposed as a solution to this problem; the coating enhances the mechanical integrity of the anode CL and its interfacial adhesion to the porous transport layer through electronic interactions. Furthermore, the aerophobic property of PDA helps remove O2 bubbles from the catalyst surface to improve the AEMWE performance. An AEMWE with the PDA coating exhibits stable operation for 300 h without any sign of initial degradation while maintaining high energy efficiency (>91.6%, higher heating value), underscoring the importance of the mechanical robustness and interfacial adhesion of the anode CL for achieving high-durability AEMWEs