The Search for Supernova-produced Radionuclides in Terrestrial Deep-sea Archives

An enhanced concentration of 60Fe was found in a deep ocean's crust in 2004 in a layer corresponding to an age of ~2 Myr. The confirmation of this signal in terrestrial archives as supernova-induced and detection of other supernova-produced radionuclides is of great interest. We have identified two suitable marine sediment cores from the South Australian Basin and estimated the intensity of a possible signal of the supernova-produced radionuclides 26Al, 53Mn, 60Fe and the pure r-process element 244Pu in these cores. A finding of these radionuclides in a sediment core might allow to improve the time resolution of the signal and thus to link the signal to a supernova event in the solar vicinity ~2 Myr ago. Furthermore, it gives an insight on nucleosynthesis scenarios in massive stars, the condensation into dust grains and transport mechanisms from the supernova shell into the solar system

AMS measurements of cosmogenic and supernova-ejected radionuclides in deep-sea sediment cores

Samples of two deep-sea sediment cores from the Indian Ocean are analyzed with accelerator mass spectrometry (AMS) to search for traces of recent supernova activity around 2 Myr ago. Here, long-lived radionuclides, which are synthesized in massive stars and ejected in supernova explosions, namely 26Al, 53Mn and 60Fe, are extracted from the sediment samples. The cosmogenic isotope 10Be, which is mainly produced in the Earths atmosphere, is analyzed for dating purposes of the marine sediment cores. The first AMS measurement results for 10Be and 26Al are presented, which represent for the first time a detailed study in the time period of 1.7-3.1 Myr with high time resolution. Our first results do not support a significant extraterrestrial signal of 26Al above terrestrial background. However, there is evidence that, like 10Be, 26Al might be a valuable isotope for dating of deep-sea sediment cores for the past few million years.Comment: 5 pages, 2 figures, Proceedings of the Heavy Ion Accelerator Symposium on Fundamental and Applied Science, 2013, will be published by the EPJ Web of conference

Search for supernova-produced 60Fe in a marine sediment

An 60Fe peak in a deep-sea FeMn crust has been interpreted as due to the signature left by the ejecta of a supernova explosion close to the solar system 2.8 +/- 0.4 Myr ago [Knie et al., Phys. Rev. Lett. 93, 171103 (2004)]. To confirm this interpretation with better time resolution and obtain a more direct flux estimate, we measured 60Fe concentrations along a dated marine sediment. We find no 60Fe peak at the expected level from 1.7 to 3.2 Myr ago. However, applying the same chemistry used for the sediment, we confirm the 60Fe signal in the FeMn crust. The cause of the discrepancy is discussed.Comment: 15 pages, 5 figures, submitted to PR

Time resolved 2 million year old supernova activity discovered in Earth's microfossil record

Massive stars, which terminate their evolution as core collapse supernovae, are theoretically predicted to eject more than 1E-5 solar masses of the radioisotope 60Fe. If such an event occurs sufficiently close to our solar system, traces of the supernova debris could be deposited on Earth. Herein, we report a time resolved 60Fe signal residing, at least partially, in a biogenic reservoir. Using accelerator mass spectrometry, this signal was found through the direct detection of live 60Fe atoms contained within secondary iron oxides, among which are magnetofossils, the fossilized chains of magnetite crystals produced by magnetotactic bacteria. The magnetofossils were chemically extracted from two Pacific Ocean sediment drill cores. Our results show that the 60Fe signal onset occurs around 2.6 Ma to 2.8 Ma, near the lower Pleistocene boundary, terminates around 1.7 Ma, and peaks at about 2.2 Ma.Comment: Figures from the Supplementary Information are not included due to file size restrictions. Download the, now open access, original article for those details (see doi

41Ca in tooth enamel. part I: A biological signature of neutron exposure in atomic bomb survivors

The detection of 41Ca atoms in tooth enamel using accelerator mass spectrometry is suggested as a method capable of reconstructing thermal neutron exposures from atomic bomb survivors in Hiroshima and Nagasaki. In general, 41Ca atoms are produced via thermal neutron capture by stable 40Ca. Thus any 41Ca atoms present in the tooth enamel of the survivors would be due to neutron exposure from both natural sources and radiation from the bomb. Tooth samples from five survivors in a control group with negligible neutron exposure were used to investigate the natural 41Ca content in tooth enamel, and 16 tooth samples from 13 survivors were used to estimate bomb-related neutron exposure. The results showed that the mean 41Ca/Ca isotope ratio was (0.17 ± 0.05) × 10-14 in the control samples and increased to 2 × 10-14 for survivors who were proximally exposed to the bomb. The 41Ca/Ca ratios showed an inverse correlation with distance from the hypocenter at the time of the bombing, similar to values that have been derived from theoretical free-in-air thermal-neutron transport calculations. Given that γ-ray doses were determined earlier for the same tooth samples by means of electron spin resonance (ESR, or electron paramagnetic resonance, EPR), these results can serve to validate neutron exposures that were calculated individually for the survivors but that had to incorporate a number of assumptions (e.g. shielding conditions for the survivors).Fil: Wallner, A.. Ludwig Maximilians Universitat; Alemania. Universitat Technical Zu Munich; Alemania. Universidad de Viena; AustriaFil: Ruhm, W.. Helmholtz Center Munich German Research Center For Environmental Health; Alemania. Ludwig Maximilians Universitat; AlemaniaFil: Rugel, G.. Ludwig Maximilians Universitat; Alemania. Universitat Technical Zu Munich; AlemaniaFil: Nakamura, N.. Radiation Effects Research Foundation; JapónFil: Arazi, Andres. Universitat Technical Zu Munich; Alemania. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Faestermann, T.. Universitat Technical Zu Munich; AlemaniaFil: Knie, K.. Universitat Technical Zu Munich; Alemania. Ludwig Maximilians Universitat; AlemaniaFil: Maier, H. J.. Ludwig Maximilians Universitat; AlemaniaFil: Korschinek, G.. Universitat Technical Zu Munich; Alemani

The 63^{63}Ni(n,γ\gamma) cross section measured with DANCE

The neutron capture cross section of the s-process branch nucleus $^{63}$Ni affects the abundances of other nuclei in its region, especially $^{63}$Cu and $^{64}$Zn. In order to determine the energy dependent neutron capture cross section in the astrophysical energy region, an experiment at the Los Alamos National Laboratory has been performed using the calorimetric 4$\pi$ BaF$_2$ array DANCE. The (n,$\gamma$) cross section of $^{63}$Ni has been determined relative to the well known $^{197}$Au standard with uncertainties below 15%. Various $^{63}$Ni resonances have been identified based on the Q-value. Furthermore, the s-process sensitivity of the new values was analyzed with the new network calculation tool NETZ.Comment: 11 pages, 13 page

Solving the stellar 62Ni problem with AMS

An accurate knowledge of the neutron capture cross sections of 62,63Ni is crucial since both isotopes take key positions which affect the whole reaction flow in the weak s process up to A=90. No experimental value for the 63Ni(n,gamma) cross section exists so far, and until recently the experimental values for 62Ni(n,gamma) at stellar temperatures (kT=30 keV) ranged between 12 and 37 mb. This latter discrepancy could now be solved by two activations with following AMS using the GAMS setup at the Munich tandem accelerator which are also in perfect agreement with a recent time-of-flight measurement. The resulting (preliminary) Maxwellian cross section at kT=30 keV was determined to be 30keV = 23.4 +/- 4.6 mb. Additionally, we have measured the 64Ni(gamma,n)63Ni cross section close to threshold. Photoactivations at 13.5 MeV, 11.4 MeV and 10.3 MeV were carried out with the ELBE accelerator at Forschungszentrum Dresden-Rossendorf. A first AMS measurement of the sample activated at 13.5 MeV revealed a cross section smaller by more than a factor of 2 compared to NON-SMOKER predictions.Comment: Proceedings of the 11th International Conference on Accelerator Mass Spectrometry in Rome, Sept. 14-19, 2008; to be published in Nucl. Instr. Meth.

Nuclear data from AMS & nuclear data for AMS - some examples

We summarize some recent cross-section measurements using accelerator mass spectrometry (AMS). AMS represents an ultra-sensitive technique for measuring a limited, but steadily increasing number of longer-lived radionuclides. This method implies a two-step procedure with sample activation and subsequent AMS measurement. Applications include nuclear astrophysics, nuclear technology (nuclear fusion, nuclear fission and advanced reactor concepts and radiation dose estimations). A series of additional applications involves cosmogenic radionuclides in environmental, geological and extraterrestrial studies. Lack of information exists for a list of nuclides as pointed out by nuclear data requests. An overview of some recent measurements is given and the method is exemplified for some specific neutron-induced reactions.JRC.D.4-Standards for Nuclear Safety, Security and Safeguard