3 research outputs found

    Growth and treatment of hydrogenated amorphous carbon nanoparticles in a low‐pressure plasma

    Get PDF
    A parallel ‐ plate, low ‐ pressure plasma for fundamental nanodusty plasma re- search is used to grow hydrogenated amorphous carbon nanoparticles using an argon ‐ acetylene gas mixture. The particles stay confined in the volume of the argon plasma after turning off the C H 2 2 gas flow and the effects of pro- longed treatment with noble gas (Ar) and reactive gas mixtures (Ar/ H 2, Ar/ D 2, or Ar/ O 2) are investigated using in situ infrared absorption spectroscopy. Additionally, ex situ scanning electron microscopy imaging of extracted na- noparticles is used to analyze their size and surface morphology. In 45 min of argon treatment, a size increase of about 50% is seen together with a decrease in sp CH x 2 bonds and an increase in C ═ O bonds, indicating incorporation of oxygen from gas impurities into the particle material. All reactive gas mixtures lead to the expected etching of the nanoparticle material without any ex- change reactions between gas ‐ phase deuterium and surface ‐ bonded hydrogen atoms. These results are important for in situ studies of nanoparticle clouds such as dust density wave diagnostics, but they also provide fundamental informa- tion about plasma interaction with a ‐ C:H material

    Silicon nanocrystal synthesis with the atmospheric plasma source HelixJet

    Get PDF
    The HelixJet, a plasma source operating under atmospheric pressure with RF power, was used for the synthesis of silicon nanoparticles (Si-NPs) in the context of relevance in nanomedicine, sensor technology, and nanotechnology. The HelixJet was operated with a variety of He/Ar/H2/SiH4 gas mixtures to characterize the Si-NPs in regard to their size, crystallinity, structure, and photoluminescence. Distinct varieties of nanomaterials in the size range from 3 nm to over 100 nm were synthesized depending on the operation parameters of the HelixJet. Admixture of H2 alongside high RF powers led to the formation of crystalline nanoparticles with a strong photoluminescence intensity, where the photoluminescence properties as well as the nanocrystal synthesis yield were tunable by adjustment of the synthesis parameters. Post-synthesis in-flight annealing allowed the formation of large crystalline nanoparticles. In addition, the experiments conducted in this study resulted in a design improvement of the HelixJet plasma source that extends the stability of the operating range. Furthermore, the added spatial separation of the He/H2 and He/Ar/SiH4 streams (SiH4 injection on-axis) minimizes material deposition within the HelixJet and enables continuous long-term operation

    Additive Manufacturing as a Means of Gas Sensor Development for Battery Health Monitoring

    Get PDF
    Lithium-ion batteries (LIBs) still need continuous safety monitoring based on their intrinsic properties, as well as due to the increase in their sizes and device requirements. The main causes of fires and explosions in LIBs are heat leakage and the presence of highly inflammable components. Therefore, it is necessary to improve the safety of the batteries by preventing the generation of these gases and/or their early detection with sensors. The improvement of such safety sensors requires new approaches in their manufacturing. There is a growing role for research of nanostructured sensor’s durability in the field of ionizing radiation that also can induce structural changes in the LIB’s component materials, thus contributing to the elucidation of fundamental physicochemical processes; catalytic reactions or inhibitions of the chemical reactions on which the work of the sensors is based. A current method widely used in various fields, Direct Ink Writing (DIW), has been used to manufacture heterostructures of Al2O3/CuO and CuO:Fe2O3, followed by an additional ALD and thermal annealing step. The detection properties of these 3D-DIW printed heterostructures showed responses to 1,3-dioxolan (DOL), 1,2-dimethoxyethane (DME) vapors, as well as to typically used LIB electrolytes containing LiTFSI and LiNO3 salts in a mixture of DOL:DME, as well also to LiPF6 salts in a mixture of ethylene carbonate (EC) and dimethyl carbonate (DMC) at operating temperatures of 200 °C–350 °C with relatively high responses. The combination of the possibility to detect electrolyte vapors used in LIBs and size control by the 3D-DIW printing method makes these heterostructures extremely attractive in controlling the safety of batteries
    corecore