Electrical performance characteristics of high power converters for space power applications

The first goal of this project was to investigate various converters that would be suitable for processing electric power derived from a nuclear reactor. The implementation is indicated of a 20 kHz system that includes a source converter, a ballast converter, and a fixed frequency converter for generating the 20 kHz output. This system can be converted to dc simply by removing the fixed frequency converter. This present study emphasized the design and testing of the source and ballast converters. A push-pull current-fed (PPCF) design was selected for the source converter, and a 2.7 kW version of this was implemented using three 900 watt modules in parallel. The characteristic equation for two converters in parallel was derived, but this analysis did not yield any experimental methods for measuring relative stability. The three source modules were first tested individually and then in parallel as a 2.7 kW system. All tests proved to be satisfactory; the system was stable; efficiency and regulation were acceptable; and the system was fault tolerant. The design of a ballast-load converter, which was operated as a shunt regulator, was investigated. The proposed power circuit is suitable for use with BJTs because proportional base drive is easily implemented. A control circuit which minimizes switching frequency ripple and automatically bypasses a faulty shunt section was developed. A nonlinear state-space-averaged model of the shunt regulator was developed and shown to produce an accurate incremental (small-signal) dynamic model, even though the usual state-space-averaging assumptions were not met. The nonlinear model was also shown to be useful for large-signal dynamic simulation using PSpice

Causes of spurious features in spectral reflectance data

Several techniques are becoming common in the analysis of imaging spectrometer data that can lead to spurious absorption features or to changes in the position, width, and shape of actual absorption features. It is a common practice to calibrate AIS or other imaging spectrometer data by averaging each pixel along the flight line. The average is used to calibrate the spectral data by dividing the spectrum at each pixel by the average. If some pixels in the data set contain an absorption, then the average will also show an absorption. Some AIS data has had problems with wavelength stability from one scan line to the next which can produce spurious features with some analysis methods. If a pixel has a spectrum with an absorption having a different position or width than the spectrum used in a ratio, then the ratio can produce a spurious absorption at a different position and width than the true absorption feature. An average spectrum ratioed to each pixel will produce band shifts, and changes in width or shape. If continuum removal is performed by substraction rather than division, band positions can also be shifted

A comparative study of electric power distribution systems for spacecraft

The electric power distribution systems for spacecraft are compared concentrating on two interrelated issues: the choice between dc and high frequency ac, and the converter/inverter topology to be used at the power source. The relative merits of dc and ac distribution are discussed. Specific converter and inverter topologies are identified and analyzed in detail for the purpose of detailed comparison. Finally, specific topologies are recommended for use in dc and ac systems

Automatic continuum analysis of reflectance spectra

A continuum algorithm based on a Segmented Upper Hull method (SUH) is described. An upper hull is performed on segments of a spectrum defined by local minima and maxima. The segments making a complete spectrum are then combined. The definition of the upper hull allows the continuum to be both concave and/or convex, adapting to the shape of the spectrum. The method performs multiple passes on a spectrum by segmenting each local maximum to minimum and performing an upper hull. The algorithm naturally adapts to the widths of absorption features, so that all features are found, including the nature of doublets, triplets, etc. The algorithm is also reasonably fast on common minicomputers so that it might be applied to the large data sets from imaging spectrometers

Counting What Is Measured or Measuring What Counts? League Tables and Their Impact On Higher Education Institutions in England

This report investigates league tables and their impact on higher education institutions (HEIs) in England. It presents findings from two strands of research: – an analysis of five league tables selected for the study, their methodologies and the underlying data employed, and – an investigation of how higher education institutions respond to league tables generally and the extent to which they influence institutional decision-making and actions. The purpose of the research is to stimulate informed debate about the approaches and limitations of the various league tables, and greater understanding among the users and stakeholders of the implications of making decisions based on these sources of information

Application of Advanced Early Warning Systems with Adaptive Protection

This project developed and field-tested two methods of Adaptive Protection systems utilizing synchrophasor data. One method detects conditions of system stress that can lead to unintended relay operation, and initiates a supervisory signal to modify relay response in real time to avoid false trips. The second method detects the possibility of false trips of impedance relays as stable system swings “encroach” on the relays’ impedance zones, and produces an early warning so that relay engineers can re-evaluate relay settings. In addition, real-time synchrophasor data produced by this project was used to develop advanced visualization techniques for display of synchrophasor data to utility operators and engineers

Higher Education and Society: A research report

This report draws on a substantial body of research undertaken by the Open University's Centre for Higher Education Research and Information (CHERI) on the changing relationships between higher education and society. Higher education currently faces many changes, some externally driven by government policies and changing patterns of social and economic demand and some internally driven by changes in the way knowledge is produced and organised within universities and other 'knowledge organisations'. CHERI examines these changes through empirical research which is policy relevant though not policy dictated, frequently international, and broadly focused on the social impacts of higher education. Does higher education make a difference and to whom? In their different ways, the articles in this report seek to provide answers to this important but difficult question

Constraints preserving genetic algorithm for learning fuzzy measures with an application to ontology matching

Abstract. Both the fuzzy measure and integral have been widely studied for multi-source information fusion. A number of researchers have proposed optimization techniques to learn a fuzzy measure from training data. In part, this task is difficult as the fuzzy measure can have a large number of free parameters (2 N − 2 for N sources) and it has many (monotonicity) constraints. In this paper, a new genetic algorithm approach to constraint preserving optimization of the fuzzy measure is present for the task of learning and fusing different ontology matching results. Preliminary results are presented to show the stability of the leaning algorithm and its effectiveness compared to existing approaches