37 research outputs found
Direct observation of a gate tunable band-gap in electrical transport in ABC-trilayer graphene
Few layer graphene systems such as Bernal stacked bilayer and rhombohedral
(ABC-) stacked trilayer offer the unique possibility to open an electric field
tunable energy gap. To date, this energy gap has been experimentally confirmed
in optical spectroscopy. Here we report the first direct observation of the
electric field tunable energy gap in electronic transport experiments on doubly
gated suspended ABC-trilayer graphene. From a systematic study of the
non-linearities in current \textit{versus} voltage characteristics and the
temperature dependence of the conductivity we demonstrate that thermally
activated transport over the energy-gap dominates the electrical response of
these transistors. The estimated values for energy gap from the temperature
dependence and from the current voltage characteristics follow the
theoretically expected electric field dependence with critical exponent .
These experiments indicate that high quality few-layer graphene are suitable
candidates for exploring novel tunable THz light sources and detectors.Comment: Nano Letters, 2015 just accepted, DOI: 10.1021/acs.nanolett.5b0077
Resonant Visible Light Modulation with Graphene
Fast modulation and switching of light at visible and near-infrared (vis-NIR)
frequencies is of utmost importance for optical signal processing and sensing
technologies. No fundamental limit appears to prevent us from designing
wavelength-sized devices capable of controlling the light phase and intensity
at gigaherts (and even terahertz) speeds in those spectral ranges. However,
this problem remains largely unsolved, despite recent advances in the use of
quantum wells and phase-change materials for that purpose. Here, we explore an
alternative solution based upon the remarkable electro-optical properties of
graphene. In particular, we predict unity-order changes in the transmission and
absorption of vis-NIR light produced upon electrical doping of graphene sheets
coupled to realistically engineered optical cavities. The light intensity is
enhanced at the graphene plane, and so is its absorption, which can be switched
and modulated via Pauli blocking through varying the level of doping.
Specifically, we explore dielectric planar cavities operating under either
tunneling or Fabry-Perot resonant transmission conditions, as well as Mie modes
in silicon nanospheres and lattice resonances in metal particle arrays. Our
simulations reveal absolute variations in transmission exceeding 90% as well as
an extinction ratio >15 dB with small insertion losses using feasible material
parameters, thus supporting the application of graphene in fast electro-optics
at vis-NIR frequencies.Comment: 17 pages, 13 figures, 54 reference
Investigation of discharge channel wall material influence on lifetime of hall effect thruster with high specific impulse
Results of 500-hour life tests of the 900-watt Hall-thruster laboratory model with the specific impulse of 2000 s are presented. The thruster discharge channel walls were manufactured from 60% BN + 40% SiO2 and >90% BN hot-pressed ceramics. The predicted total lifetime was ∼3000 h for both wall materials in spite of greater erosion resistance of pure BN in comparison with BN-SiO2 mixture. To clarify the accompanying phenomena, the following diagnostics were carried out. The surface microstructure and composition insulators were investigated by means of electron microscopy and X-ray fluorescence analysis and nearwall plasma parameters were measured with flat Langmuir probes. The obtained distributions of plasma parameters were compared with the results of stationary one-dimensional (1D) hydrodynamic modeling of discharge channel
Strategy for accurate thermal biasing at the nanoscale
We analyze the benefits and shortcomings of a thermal control in nanoscale electronic conductors by means of the contact heating scheme. Ideally, this straightforward approach allows one to apply a known thermal bias across nanostructures directly through metallic leads, avoiding conventional substrate intermediation. We show, by using the average noise thermometry and local noise sensing technique in InAs nanowire-based devices, that a nanoscale metallic constriction on a SiO2 substrate acts like a diffusive conductor with negligible electron-phonon relaxation and non-ideal leads. The non-universal impact of the leads on the achieved thermal bias-which depends on their dimensions, shape and material composition-is hard to minimize, but is possible to accurately calibrate in a properly designed nano-device. Our results allow to reduce the issue of the thermal bias calibration to the knowledge of the heater resistance and pave the way for accurate thermoelectric or similar measurements at the nanoscale
Spatial and energy resolution of electronic states by shot noise
| openaire: EC/H2020/766025/EU//QuESTechShot-noise measurements are widely used for the characterization of nonequilibrium configurations in electronic conductors. The recently introduced quantum tomography approach was implemented for the studies of electronic wave functions of few-electron excitations created by periodic voltage pulses in phase-coherent ballistic conductors based on the high-quality GaAs two-dimensional electron gas. Still relying on the manifestation of Fermi correlations in noise, we focus on the simpler and more general approach beneficial for local measurements of energy distribution (ED) in electronic systems with arbitrary excitations with well-defined energies and random phases. Using biased diffusive metallic wire as a test bed, we demonstrate the power of this approach and extract the well-known double-step ED from the shot noise of a weakly coupled tunnel junction. Our experiment paves the way for local measurements of generic nonequilibrium configurations applicable to virtually any conductor.Peer reviewe