Real-Time, Single-Particle Volatility, Size, and Chemical Composition Measurements of Aged Urban Aerosols

Aerosol particles undergo significant amounts of atmospheric processing within the Los Angeles basin. To assess the major sources and degree of aging, ambient particle volatility, size, and chemical composition were measured concurrently in real-time during the Study of Organic Aerosols conducted in Riverside, CA in November 2005. A thermodenuder (TD) was coupled to an aerosol time-of-flight mass spectrometer (ATOFMS) to characterize the chemistry of the individual submicrometer particles remaining after heating. Aged organic carbon (OC) particles contained >50% by volume secondary species, primarily ammonium nitrate, ammonium sulfate, and amines. At 230 °C, the chemistry of the 100−150 nm residues were elemental carbon (29% by number), OC (27%), and biomass burning (15%). Sea salt (47%) and dust (15%) were the major contributors at the larger sizes (750−800 nm). Many particles at 230 °C possessed signatures similar to those of fresh vehicle emissions, biomass burning, sea salt, and dust particles, showing that the TD-ATOFMS method can be used to apportion particles in highly aged environments to their original sources, while providing insight into the relative contributions of primary and secondary species

Seasonal Volatility Dependence of Ambient Particle Phase Amines

During the summer and fall of 2005 in Riverside, California, the seasonal volatility behavior of submicrometer aerosol particles was investigated by coupling an automated thermodenuder system to an online single-particle mass spectrometer. A strong seasonal dependence was observed for the gas/particle partitioning of alkylamines within individual ambient submicrometer aged organic carbon particles internally mixed with ammonium, nitrate, and sulfate. In the summer, the amines were strongly correlated with nitrate and sulfate, suggesting the presence of aminium nitrate and sulfate salts which were nonvolatile and comprised ∼6−9% of the average particle mass at 230 °C. In the fall, 86 ± 1% of the amines volatilized below 113 °C with aminium nitrate and sulfate salts representing less than 1% of the particle mass at 230 °C. In the summer, a more acidic particle core led to protonation of the amines and subsequent formation of aminium sulfate and nitrate salts; whereas, in the fall, the particles contained more ammonium and thus were less acidic, causing fewer aminium salts to form. Therefore, the acidity of individual particles can greatly affect gas/particle partitioning of organic species in the atmosphere, and the concentrations of amines, as strong bases, should be included in estimations of aerosol pH

Real-Time Detection and Mixing State of Methanesulfonate in Single Particles at an Inland Urban Location during a Phytoplankton Bloom

Dimethyl sulfide (DMS), produced by oceanic phytoplankton, is oxidized to form methanesulfonic acid (MSA) and sulfate, which influence particle chemistry and hygroscopicity. Unlike sulfate, MSA has no known anthropogenic source making it a useful tracer for ocean-derived biogenic sulfur. Despite numerous observations of MSA, predominately in marine environments, the production pathways of MSA have remained elusive highlighting the need for additional measurements, particularly at inland locations. During the Study of Organic Aerosols in Riverside, CA from July-August 2005, MSA was detected in submicrometer and supermicrometer particles using real-time, single-particle mass spectrometry. MSA was detected due to blooms of DMS-producing organisms along the California coast. The detection of MSA depended on both the origin of the sampled air mass as well as the concentration of oceanic chlorophyll present. MSA was mainly mixed with coastally emitted particle types implying that partitioning of MSA occurred before transport to Riverside. Importantly, particles containing vanadium had elevated levels of MSA compared to particles not containing vanadium, suggesting a possible catalytic role of vanadium in MSA formation. This study demonstrates how anthropogenic, metal-containing aerosols can enhance the atmospheric processing of biogenic emissions, which needs to be considered when modeling coastal as well as urban locations

Constraints on Arctic Atmospheric Chlorine Production through Measurements and Simulations of Cl₂ and ClO

During springtime, unique halogen chemistry involving chlorine and bromine atoms controls the prevalence of volatile organic compounds, ozone, and mercury in the Arctic lower troposphere. In situ measurements of the chlorine monoxide radical, ClO, and its precursor, Cl₂, along with BrO and Br₂, were conducted using chemical ionization mass spectrometry (CIMS) during the Bromine, Ozone, and Mercury Experiment (BROMEX) near Barrow, Alaska, in March 2012. To our knowledge, these data represent the first ClO measurements made using CIMS. A maximum daytime ClO concentration of 28 ppt was observed following an early morning peak of 75 ppt of Cl₂. A zero-dimensional photochemistry model was constrained to Cl₂ observations and used to simulate ClO during a 7-day period of the field campaign. The model simulates ClO within the measurement uncertainty, and the model results highlight the importance of chlorine chemistry participation in bromine radical cycling, as well as the dependence of halogen chemistry on NO_<i>x</i> levels. The ClO measurements and simulations are consistent with Cl₂ being the dominant Cl atom source in the Arctic boundary layer. Simulated Cl atom concentrations, up to ∼1 × 10⁶ molecules cm^–3, highlight the importance of chlorine chemistry in the degradation of volatile organic compounds, including the greenhouse gas methane

Impacts of Aerosol Aging on Laser Desorption/Ionization in Single-Particle Mass Spectrometers

<div><p>Single-particle mass spectrometry (SPMS) has been widely used for characterizing the chemical mixing state of ambient aerosol particles. However, processes occurring during particle ablation and ionization can influence the mass spectra produced by these instruments. These effects remain poorly characterized for complex atmospheric particles. During the 2005 Study of Organic Aerosols in Riverside (SOAR), a thermodenuder was used to evaporate the more volatile aerosol species in sequential temperature steps up to 230°C; the residual aerosol particles were sampled by an aerosol mass spectrometer (AMS) and a single-particle aerosol time-of-flight mass spectrometer (ATOFMS). Removal of the secondary species (e.g., ammonium nitrate/sulfate) through heating permitted assessment of the change in ionization patterns as the composition changed for a given particle type. It was observed that a coating of secondary species can reduce the ionization efficiency by changing the degree of laser absorption or particle ablation, which significantly impacted the measured ion peak areas. Nonvolatile aerosol components were used as pseudo-internal standards (or “reference components”) to correct for this LDI effect. Such corrected ATOFMS ion peak areas correlated well with the AMS measurements of the same species up to 142°C. This work demonstrates the potential to accurately relate SPMS peak areas to the mass of specific aerosol components.</p><p>Copyright 2014 American Association for Aerosol Research</p></div

Quantitative Determination of Biogenic Volatile Organic Compounds in the Atmosphere Using Proton-Transfer Reaction Linear Ion Trap Mass Spectrometry

Although oxidation of biogenic volatile organic compounds (BVOCs) plays an important role in tropospheric ozone and secondary organic aerosol production, significant uncertainties remain in our understanding of the impacts of BVOCs on ozone, aerosols, and climate. To quantify BVOCs, the proton-transfer reaction linear ion trap (PTR-LIT) mass spectrometer was previously developed. The PTR-LIT represents an improvement over more traditional techniques (including the proton-transfer reaction mass spectrometer), providing the capability to directly quantify and differentiate isomeric compounds by MS/MS analysis, with better time resolution and minimal sample handling, compared to gas chromatography techniques. Herein, we present results from the first field deployment of the PTR-LIT. During the Program for Research on Oxidants: Photochemistry, Emissions and Transport (PROPHET) summer 2008 study in northern Michigan, the PTR-LIT successfully quantified isoprene, total monoterpenes, and isomeric isoprene oxidation products methyl vinyl ketone and methacrolein at sub-parts per billion (nmol/mol) levels in a complex forest atmosphere. The utility of the fast time response of the PTR-LIT was shown by the measurement of rapid changes in isoprene, methyl vinyl ketone, and methacrolein, concurrent with changing ozone mole fractions. Overall, the PTR-LIT was shown to be a viable field instrument with the necessary sensitivity, selectivity, and time response to provide detailed measurements of BVOC mole fractions in complex atmospheric samples, at trace levels

Lake Spray Aerosol: A Chemical Signature from Individual Ambient Particles

Aerosol production from wave breaking on freshwater lakes, including the Laurentian Great Lakes, is poorly understood in comparison to sea spray aerosol (SSA). Aerosols from freshwater have the potential to impact regional climate and public health. Herein, lake spray aerosol (LSA) is defined as aerosol generated from freshwater through bubble bursting, analogous to SSA from seawater. A chemical signature for LSA was determined from measurements of ambient particles collected on the southeastern shore of Lake Michigan during an event (July 6–8, 2015) with wave heights up to 3.1 m. For comparison, surface freshwater was collected, and LSA were generated in the laboratory. Single particle microscopy and mass spectrometry analysis of field and laboratory-generated samples show that LSA particles are primarily calcium (carbonate) with lower concentrations of other inorganic ions and organic material. Laboratory number size distributions show ultrafine and accumulation modes at 53 (±1) and 276 (±8) nm, respectively. This study provides the first chemical signature for LSA. LSA composition is shown to be coupled to Great Lakes water chemistry (Ca2+ > Mg2+ > Na+ > K+) and distinct from SSA. Understanding LSA physicochemical properties will improve assessment of LSA impacts on regional air quality, climate, and health

Laboratory Studies of the Cloud Droplet Activation Properties and Corresponding Chemistry of Saline Playa Dust

Playas emit large quantities of dust that can facilitate the activation of cloud droplets. Despite the potential importance of playa dusts for cloud formation, most climate models assume that all dust is nonhygroscopic; however, measurements are needed to clarify the role of dusts in aerosol-cloud interactions. Here, we report measurements of CCN activation from playa dusts and parameterize these results in terms of both κ-Köhler theory and adsorption activation theory for inclusion in atmospheric models. κ ranged from 0.002 ± 0.001 to 0.818 ± 0.094, whereas Frankel-Halsey-Hill (FHH) adsorption parameters of <i>A</i>_FHH = 2.20 ± 0.60 and <i>B</i>_FHH = 1.24 ± 0.14 described the water uptake properties of the dusts. Measurements made using aerosol time-of-flight mass spectrometry (ATOFMS) revealed the presence of halite, sodium sulfates, and sodium carbonates that were strongly correlated with κ underscoring the role that mineralogy, including salts, plays in water uptake by dust. Predictions of κ made using bulk chemical techniques generally showed good agreement with measured values. However, several samples were poorly predicted suggesting that chemical heterogeneities as a function of size or chemically distinct particle surfaces can determine the hygroscopicity of playa dusts. Our results further demonstrate the importance of dust in aerosol–cloud interactions

Aqueous Processing of Atmospheric Organic Particles in Cloud Water Collected via Aircraft Sampling

Cloudwater and below-cloud atmospheric particle samples were collected onboard a research aircraft during the Southern Oxidant and Aerosol Study (SOAS) over a forested region of Alabama in June 2013. The organic molecular composition of the samples was studied to gain insights into the aqueous-phase processing of organic compounds within cloud droplets. High resolution mass spectrometry (HRMS) with nanospray desorption electrospray ionization (nano-DESI) and direct infusion electrospray ionization (ESI) were utilized to compare the organic composition of the particle and cloudwater samples, respectively. Isoprene and monoterpene-derived organosulfates and oligomers were identified in both the particles and cloudwater, showing the significant influence of biogenic volatile organic compound oxidation above the forested region. While the average O:C ratios of the organic compounds were similar between the atmospheric particle and cloudwater samples, the chemical composition of these samples was quite different. Specifically, hydrolysis of organosulfates and formation of nitrogen-containing compounds were observed for the cloudwater when compared to the atmospheric particle samples, demonstrating that cloud processing changes the composition of organic aerosol