43 research outputs found

    Dosage-Dependent Proteome Response of <i>Shewanella</i><i> oneidensis</i> MR-1 to Acute Chromate Challenge

    No full text
    Proteome alterations in the metal-reducing bacterium Shewanella oneidensis MR-1 in response to different acute dose challenges (0.3, 0.5, or 1 mM) of the toxic metal chromate [Cr(VI)] were characterized with multidimensional HPLC−MS/MS. Proteome measurements were performed and compared on both quadrupole ion traps as well as linear trapping quadrupole mass spectrometers. We have found that the implementation of multidimensional liquid chromatography on-line with the rapid scanning, high throughput linear trapping quadrupole platform resulted in a dramatic increase in the number of measured peptides and, thus, the number of identified proteins. A total of 2406 functionally diverse, nonredundant proteins were identified in this study, representing a relatively deep proteome coverage for this organism. The core molecular response to chromate challenge under all three concentrations consisted predominantly of proteins with annotated functions in transport and binding (e.g., components of the TonB1 iron transport system, TonB-dependent receptors, and sulfate transporters) as well as a functionally undefined DNA-binding response regulator (SO2426) that might play a role in mediating metal stress responses. In addition, proteins annotated as a cytochrome c, a putative azoreductase, and various proteins involved in general stress protection were up-regulated at the higher Cr(VI) doses (0.5 and 1 mM) only. Proteins down-regulated in response to metal treatment were distributed across diverse functional categories, with energy metabolism proteins dominating. The results presented in this work demonstrate the dynamic dosage response of S. oneidensis to sub-toxic levels of chromate. Keywords: mass spectrometry • multidimensional liquid chromatography • shotgun proteomics • Shewanella oneidensis • linear trapping quadrupole • chromate stres

    Coupling a Detergent Lysis/Cleanup Methodology with Intact Protein Fractionation for Enhanced Proteome Characterization

    No full text
    The expanding use of surfactants for proteome sample preparations has prompted the need to systematically optimize the application and removal of these MS-deleterious agents prior to proteome measurements. Here we compare four detergent cleanup methods (trichloroacetic acid (TCA) precipitation, chloroform/methanol/water (CMW) extraction, a commercial detergent removal spin column method (DRS) and filter-aided sample preparation (FASP)) to provide efficiency benchmarks with respect to protein, peptide, and spectral identifications in each case. Our results show that for protein-limited samples, FASP outperforms the other three cleanup methods, while at high protein amounts, all the methods are comparable. This information was used to investigate and contrast molecular weight-based fractionated with unfractionated lysates from three increasingly complex samples (Escherichia coli K-12, a five microbial isolate mixture, and a natural microbial community groundwater sample), all of which were prepared with an SDS-FASP approach. The additional fractionation step enhanced the number of protein identifications by 8% to 25% over the unfractionated approach across the three samples

    Dosage-Dependent Proteome Response of <i>Shewanella</i><i> oneidensis</i> MR-1 to Acute Chromate Challenge

    No full text
    Proteome alterations in the metal-reducing bacterium Shewanella oneidensis MR-1 in response to different acute dose challenges (0.3, 0.5, or 1 mM) of the toxic metal chromate [Cr(VI)] were characterized with multidimensional HPLC−MS/MS. Proteome measurements were performed and compared on both quadrupole ion traps as well as linear trapping quadrupole mass spectrometers. We have found that the implementation of multidimensional liquid chromatography on-line with the rapid scanning, high throughput linear trapping quadrupole platform resulted in a dramatic increase in the number of measured peptides and, thus, the number of identified proteins. A total of 2406 functionally diverse, nonredundant proteins were identified in this study, representing a relatively deep proteome coverage for this organism. The core molecular response to chromate challenge under all three concentrations consisted predominantly of proteins with annotated functions in transport and binding (e.g., components of the TonB1 iron transport system, TonB-dependent receptors, and sulfate transporters) as well as a functionally undefined DNA-binding response regulator (SO2426) that might play a role in mediating metal stress responses. In addition, proteins annotated as a cytochrome c, a putative azoreductase, and various proteins involved in general stress protection were up-regulated at the higher Cr(VI) doses (0.5 and 1 mM) only. Proteins down-regulated in response to metal treatment were distributed across diverse functional categories, with energy metabolism proteins dominating. The results presented in this work demonstrate the dynamic dosage response of S. oneidensis to sub-toxic levels of chromate. Keywords: mass spectrometry • multidimensional liquid chromatography • shotgun proteomics • Shewanella oneidensis • linear trapping quadrupole • chromate stres

    Systematic Comparison of Label-Free, Metabolic Labeling, and Isobaric Chemical Labeling for Quantitative Proteomics on LTQ Orbitrap Velos

    No full text
    A variety of quantitative proteomics methods have been developed, including label-free, metabolic labeling, and isobaric chemical labeling using iTRAQ or TMT. Here, these methods were compared in terms of the depth of proteome coverage, quantification accuracy, precision, and reproducibility using a high-performance hybrid mass spectrometer, LTQ Orbitrap Velos. Our results show that (1) the spectral counting method provides the deepest proteome coverage for identification, but its quantification performance is worse than labeling-based approaches, especially the quantification reproducibility; (2) metabolic labeling and isobaric chemical labeling are capable of accurate, precise, and reproducible quantification and provide deep proteome coverage for quantification; isobaric chemical labeling surpasses metabolic labeling in terms of quantification precision and reproducibility; and (3) iTRAQ and TMT perform similarly in all aspects compared in the current study using a CID-HCD dual scan configuration. On the basis of the unique advantages of each method, we provide guidance for selection of the appropriate method for a quantitative proteomics study

    Systematic Comparison of Label-Free, Metabolic Labeling, and Isobaric Chemical Labeling for Quantitative Proteomics on LTQ Orbitrap Velos

    No full text
    A variety of quantitative proteomics methods have been developed, including label-free, metabolic labeling, and isobaric chemical labeling using iTRAQ or TMT. Here, these methods were compared in terms of the depth of proteome coverage, quantification accuracy, precision, and reproducibility using a high-performance hybrid mass spectrometer, LTQ Orbitrap Velos. Our results show that (1) the spectral counting method provides the deepest proteome coverage for identification, but its quantification performance is worse than labeling-based approaches, especially the quantification reproducibility; (2) metabolic labeling and isobaric chemical labeling are capable of accurate, precise, and reproducible quantification and provide deep proteome coverage for quantification; isobaric chemical labeling surpasses metabolic labeling in terms of quantification precision and reproducibility; and (3) iTRAQ and TMT perform similarly in all aspects compared in the current study using a CID-HCD dual scan configuration. On the basis of the unique advantages of each method, we provide guidance for selection of the appropriate method for a quantitative proteomics study

    Systematic Comparison of Label-Free, Metabolic Labeling, and Isobaric Chemical Labeling for Quantitative Proteomics on LTQ Orbitrap Velos

    No full text
    A variety of quantitative proteomics methods have been developed, including label-free, metabolic labeling, and isobaric chemical labeling using iTRAQ or TMT. Here, these methods were compared in terms of the depth of proteome coverage, quantification accuracy, precision, and reproducibility using a high-performance hybrid mass spectrometer, LTQ Orbitrap Velos. Our results show that (1) the spectral counting method provides the deepest proteome coverage for identification, but its quantification performance is worse than labeling-based approaches, especially the quantification reproducibility; (2) metabolic labeling and isobaric chemical labeling are capable of accurate, precise, and reproducible quantification and provide deep proteome coverage for quantification; isobaric chemical labeling surpasses metabolic labeling in terms of quantification precision and reproducibility; and (3) iTRAQ and TMT perform similarly in all aspects compared in the current study using a CID-HCD dual scan configuration. On the basis of the unique advantages of each method, we provide guidance for selection of the appropriate method for a quantitative proteomics study

    Dosage-Dependent Proteome Response of <i>Shewanella</i><i> oneidensis</i> MR-1 to Acute Chromate Challenge

    No full text
    Proteome alterations in the metal-reducing bacterium Shewanella oneidensis MR-1 in response to different acute dose challenges (0.3, 0.5, or 1 mM) of the toxic metal chromate [Cr(VI)] were characterized with multidimensional HPLC−MS/MS. Proteome measurements were performed and compared on both quadrupole ion traps as well as linear trapping quadrupole mass spectrometers. We have found that the implementation of multidimensional liquid chromatography on-line with the rapid scanning, high throughput linear trapping quadrupole platform resulted in a dramatic increase in the number of measured peptides and, thus, the number of identified proteins. A total of 2406 functionally diverse, nonredundant proteins were identified in this study, representing a relatively deep proteome coverage for this organism. The core molecular response to chromate challenge under all three concentrations consisted predominantly of proteins with annotated functions in transport and binding (e.g., components of the TonB1 iron transport system, TonB-dependent receptors, and sulfate transporters) as well as a functionally undefined DNA-binding response regulator (SO2426) that might play a role in mediating metal stress responses. In addition, proteins annotated as a cytochrome c, a putative azoreductase, and various proteins involved in general stress protection were up-regulated at the higher Cr(VI) doses (0.5 and 1 mM) only. Proteins down-regulated in response to metal treatment were distributed across diverse functional categories, with energy metabolism proteins dominating. The results presented in this work demonstrate the dynamic dosage response of S. oneidensis to sub-toxic levels of chromate. Keywords: mass spectrometry • multidimensional liquid chromatography • shotgun proteomics • Shewanella oneidensis • linear trapping quadrupole • chromate stres

    Experimental Approach for Deep Proteome Measurements from Small-Scale Microbial Biomass Samples

    No full text
    Many methods of microbial proteome characterizations require large quantities of cellular biomass (>1−2 g) for sample preparation and protein identification. Our experimental approach differs from traditional techniques by providing the ability to identify the proteomic state of a microbe from a few milligrams of starting cellular material. The small-scale, guanidine lysis method minimizes sample loss by achieving cellular lysis and protein digestion in a single-tube experiment. For this experimental approach, the freshwater microbe Shewanella oneidensis MR-1 and the purple non-sulfur bacterium Rhodopseudomonas palustris CGA0010 were used as model organisms for technology development and evaluation. A 2-D LC−MS/MS comparison between a standard sonication lysis method and the small-scale guanidine lysis techniques demonstrates that the guanidine lysis method is more efficient with smaller sample amounts of cell pellet (i.e., down to 1 mg). The described methodology enables deeper proteome measurements from a few milliliters of confluent bacterial cultures. We also report a new protocol for efficient lysis from small amounts of natural biofilm samples for deep proteome measurements, which should greatly enhance the emerging field of environmental microbial community proteomics. This straightforward sample boiling protocol is complementary to the small-scale guanidine lysis technique, is amenable for small sample quantities, and requires no special reagents that might complicate the MS measurements

    Coupling a Detergent Lysis/Cleanup Methodology with Intact Protein Fractionation for Enhanced Proteome Characterization

    No full text
    The expanding use of surfactants for proteome sample preparations has prompted the need to systematically optimize the application and removal of these MS-deleterious agents prior to proteome measurements. Here we compare four detergent cleanup methods (trichloroacetic acid (TCA) precipitation, chloroform/methanol/water (CMW) extraction, a commercial detergent removal spin column method (DRS) and filter-aided sample preparation (FASP)) to provide efficiency benchmarks with respect to protein, peptide, and spectral identifications in each case. Our results show that for protein-limited samples, FASP outperforms the other three cleanup methods, while at high protein amounts, all the methods are comparable. This information was used to investigate and contrast molecular weight-based fractionated with unfractionated lysates from three increasingly complex samples (Escherichia coli K-12, a five microbial isolate mixture, and a natural microbial community groundwater sample), all of which were prepared with an SDS-FASP approach. The additional fractionation step enhanced the number of protein identifications by 8% to 25% over the unfractionated approach across the three samples

    Coupling a Detergent Lysis/Cleanup Methodology with Intact Protein Fractionation for Enhanced Proteome Characterization

    No full text
    The expanding use of surfactants for proteome sample preparations has prompted the need to systematically optimize the application and removal of these MS-deleterious agents prior to proteome measurements. Here we compare four detergent cleanup methods (trichloroacetic acid (TCA) precipitation, chloroform/methanol/water (CMW) extraction, a commercial detergent removal spin column method (DRS) and filter-aided sample preparation (FASP)) to provide efficiency benchmarks with respect to protein, peptide, and spectral identifications in each case. Our results show that for protein-limited samples, FASP outperforms the other three cleanup methods, while at high protein amounts, all the methods are comparable. This information was used to investigate and contrast molecular weight-based fractionated with unfractionated lysates from three increasingly complex samples (Escherichia coli K-12, a five microbial isolate mixture, and a natural microbial community groundwater sample), all of which were prepared with an SDS-FASP approach. The additional fractionation step enhanced the number of protein identifications by 8% to 25% over the unfractionated approach across the three samples
    corecore