738 research outputs found

    Nonlinear disturbance observer-based control for multi-input multi-output nonlinear systems subject to mismatching condition

    Get PDF
    For a multi-input multi-output (MIMO) nonlinear system, the existing disturbance observer-based control (DOBC) only provides solutions to those whose disturbance relative degree (DRD) is higher than or equal to its input relative degree. By designing a novel disturbance compensation gain matrix, a generalised nonlinear DOBC method is proposed in this article to solve the disturbance attenuation problem of the MIMO nonlinear system with arbitrary DRD. It is shown that the disturbances are able to be removed from the output channels by the proposed method with appropriately chosen control parameters. The property of nominal performance recovery, which is the major merit of the DOBCs, is retained with the proposed method. The feasibility and effectiveness of the proposed method are demonstrated by simulation studies of both the numerical and application examples

    Robust control of uncertain nonlinear systems: a nonlinear DOBC approach

    Get PDF
    This paper advocates disturbance observer based control (DOBC) for uncertain nonlinear systems. Within this framework, a nonlinear controller is designed based on the nominal model in the absence of disturbance and uncertainty where the main design specifications are to stabilize the system and achieve good tracking performance. Then a nonlinear disturbance observer is designed to not only estimate external disturbance but also system uncertainty/ unmodelled dynamics. With described uncertainty, rigorous stability analysis of the closed-loop system under the composite controller is established in this paper. Finally, the robust control problems of a missile roll stabilization and a mass spring system are addressed to illustrative the distinct features of the nonlinear DOBC approach

    On relationship between time-domain and frequency-domain disturbance observers and its applications

    Get PDF
    This paper provides a generic analysis of the relationship between time/frequency-domain DOB design methodology. It is discovered that the traditional frequency-domain DOBs using a low pass filter with unity gain can only handle disturbances satisfying matching condition, while the traditional time-domain DOBs always generate an observer with a high order. A Functional Disturbance OBserver (FDOB) is proposed to improve the existing results together with its design guideline, frequency analysis and existence condition. Compared with the existing frequency-domain DOBs, the proposed FDOB can handle more classes of disturbances, while compared with the existing time-domain DOBs the proposed FDOB can generate an observer with a lower order. Numerical examples are presented to illustrate the main findings of this paper including a rotary mechanical system of nonminimum phase

    Robust autopilot design of uncertain bank-to-turn missiles using state-space disturbance observers

    Get PDF
    Robust autopilot design for bank-to-turn (BTT) missiles under disturbances and uncertainties is investigated in this article using the disturbance observer concept. It is well known that the BTT missile dynamics undergo substantial change during its flight. In this disturbance observer-based control (DOBC) setting, the influences caused by parameter variations are merged into disturbance terms and regarded as parts of the lumped disturbances. Disturbance observers are employed to estimate the lumped disturbances, and then a disturbance observer-based robust control (DOBRC) method is proposed in this article to compensate the influences of parameter variations and the disturbances from the output channels. Similar to the baseline linear quadratic regulator design, the DOBRC is analysed and designed using linear techniques. Very promising performance has been achieved for the BTT missile as shown in simulation. It is demonstrated that DOBC approach provides a simple, intuitive, and practical solution for many challenging control problems where systems are subject to significant external disturbances, and uncertainties such as BTT missiles

    Reduced-order disturbance observer design for discrete-time linear stochastic systems

    Get PDF
    The conventional disturbance observers for discrete-time linear stochastic systems assume that the system states are fully estimable and the disturbance estimate is dependent on the estimated system states, hereafter termed Full-Order Disturbance Observers (FODOs). This paper investigates the design of Reduced-Order Disturbance Observers (RODOs) when the system state variables are not fully estimable. An existence condition of RODO is established, which is shown to be more easily satisfied than that of the conventional FODOs and consequently it has substantially extended the scope of applications of disturbance observer theory. Then a set of recursive formulae for the RODO is developed for on-line applications. Finally, it is furth er shown that the conventional FODOs are a special case of the proposed RODO in the sense that the former reduces to the RODO when the states become fully estimable in the presence of disturbances. Examples are given to demonstrate the effectiveness and advantages of the proposed approach

    Actuator dynamics augmented DOBC for a small fixed wing UAV

    Get PDF
    This paper presents an actuator dynamics augmentation of the classical Disturbance Observer Based Control (DOBC) approach for control of a small fixed wing Unmanned Aerial Vehcile (UAV). The proposed method modifies the observer to include actuator dynamics. This augmentation allows for significantly higher observer gains in practice than traditional DOBC in the presence of actuator dynamics, resulting in better disturbance rejection performance. The actuator states are unmeasurable, so are also estimated by the proposed observer using an actuator model and the aircraft state. The actuator modelling process of the UAV is provided in detail. The closed-loop stability as well as observer tuning guidelines are discussed. The performance improvement is demonstrated first in numerical simulation and validated with flight test results using a small UAV

    Generalized extended state observer based control for systems with mismatched uncertainties

    Get PDF
    The standard extended state observer based control (ESOBC) method is only applicable for a class of single-input-single-output essential-integral-chain systems with matched uncertainties. It is noticed that systems with nonintegral-chain form and mismatched uncertainties are more general and widely exist in practical engineering systems, where the standard ESOBC method is no longer available. To this end, it is imperative to explore new ESOBC approach for these systems to extend its applicability. By appropriately choosing a disturbance compensation gain, a generalized ESOBC (GESOBC) method is proposed for nonintegral-chain systems subject to mismatched uncertainties without any coordinate transformations. The proposed method is able to extend to multi-input-multi-output systems with almost no modification. Both numerical and application design examples demonstrate the feasibility and efficacy of the proposed method

    Anomaly detection based on zone partition for security protection of industrial cyber-physical systems

    Get PDF
    A developing trend of traditional industrial systems is the integration of the cyber and physical domain to improve flexibility and the efficiency of supervision, management and control. But, the deep integration of these Industrial Cyber-Physical Systems (ICPSs), increases the potential for security threats. Attack detection, which forms initial protective barrier, plays an important role in overall security protection. However, most traditional methods focused on cyber information and ignored any limitations that might arise from the characteristics of the physical domain. In this paper, an anomaly detection approach based on zone partition is designed for ICPSs. In detail, initially an automated zone partition method ensuring crucial system states can be observed in more than one zone is designed. Then, methods of building zone function model which do not require any prior knowledge of the physical system are presented before analyzing the anomaly based on zone information. Finally, an experimental rig is constructed to verify the effectiveness of the proposed approach. The results demonstrate that the approach presents a high accuracy solution which also performs effectively in realtime

    Output-based disturbance rejection control for non-linear uncertain systems with unknown frequency disturbances using an observer backstepping approach

    Get PDF
    This study is concerned with the output feedback control design for a class of non-linear uncertain systems subject to multiple sources of disturbances including model uncertainties, unknown constant disturbances, harmonic disturbances with unknown frequency and amplitude. The total disturbances and uncertainties are delicately represented by a compact exogenous model first. By incorporating the adaptive internal model principle, a set of dynamic estimators are developed for both state and disturbance observations. By means of observer backstepping technique, a composite output feedback controller is constructed based on the disturbance and state estimations. The stability of the closedloop system is rigorously established based on Lyapunov stability criterion. A missile roll stabilisation example is finally investigated to validate the effectiveness of the proposed control approach

    Robust nonlinear generalised predictive control for a class of uncertain nonlinear systems via an integral sliding mode approach

    Get PDF
    In this paper, a robust nonlinear generalised predictive control (GPC) method is proposed by combining an integral sliding mode approach. The composite controller can guarantee zero steady-state error for a class of uncertain nonlinear systems in the presence of both matched and unmatched disturbances. Indeed, it is well known that the traditional GPC based on Taylor series expansion cannot completely reject unknown disturbance and achieve offset-free tracking performance. To deal with this problem, the existing approaches are enhanced by avoiding the use of the disturbance observer and modifying the gain function of the nonlinear integral sliding surface. This modified strategy appears to be more capable of achieving both the disturbance rejection and the nominal prescribed specifications for matched disturbance. Simulation results demonstrate the effectiveness of the proposed approach
    • …
    corecore