53,906 research outputs found
Performance of Particle Flow Calorimetry at CLIC
The particle flow approach to calorimetry can provide unprecedented jet
energy resolution at a future high energy collider, such as the International
Linear Collider (ILC). However, the use of particle flow calorimetry at the
proposed multi-TeV Compact Linear Collider (CLIC) poses a number of significant
new challenges. At higher jet energies, detector occupancies increase, and it
becomes increasingly difficult to resolve energy deposits from individual
particles. The experimental conditions at CLIC are also significantly more
challenging than those at previous electron-positron colliders, with increased
levels of beam-induced backgrounds combined with a bunch spacing of only 0.5
ns. This paper describes the modifications made to the PandoraPFA particle flow
algorithm to improve the jet energy reconstruction for jet energies above 250
GeV. It then introduces a combination of timing and p_T cuts that can be
applied to reconstructed particles in order to significantly reduce the
background. A systematic study is performed to understand the dependence of the
jet energy resolution on the jet energy and angle, and the physics performance
is assessed via a study of the energy and mass resolution of W and Z particles
in the presence of background at CLIC. Finally, the missing transverse momentum
resolution is presented, and the fake missing momentum is quantified. The
results presented in this paper demonstrate that high granularity particle flow
calorimetry leads to a robust and high resolution reconstruction of jet
energies and di-jet masses at CLIC.Comment: 14 pages, 11 figure
Results of the AFRSI Detailed-Environment Test of the 0.035-Scale SSV Pressure-Loads Model 84-0 in the Ames 11X11 Ft. TWT and the Lewis 8X6 Ft. and 10X10 Ft. SWT (OA-310A, B, C), Volume 2
In order to support analysis of the STS-6 advanced flexible reusable surface insulation (AFRSI) anomaly, data were obtained for aerodynamic and aeroacoustic environments in affected areas of the orbiter. Data are presented in tabular form
Reduction of relative intensity noise of the output field of semiconductor lasers due to propagation in dispersive optical fiber
The effect of dispersive, linear propagation (e.g., in single-mode optical fiber) on the intensity noise from semiconductor lasers is investigated. Relations between the frequency and amplitude noise variations of semiconductor lasers are obtained from the laser rate equations and used to calculate the change in the relative intensity noise (RIN) spectrum that occurs during dispersive propagation. Propagation in fiber with positive dispersion (D>0) over moderate distances (several km for standard single-mode fiber at 1.55 mu m) is found to reduce the RIN over a wide range of frequencies. Measurements with a 1.56 mu m distributed feedback laser confirm the main theoretical results and demonstrate reductions in RIN of up to II dB with 4 km of standard fiber
Exploring modality switching effects in negated sentences: further evidence for grounded representations
Theories of embodied cognition (e.g., Perceptual Symbol Systems Theory; Barsalou, 1999, 2009) suggest that modality specific simulations underlie the representation of concepts. Supporting evidence comes from modality switch costs: participants are slower to verify a property in one modality (e.g., auditory, BLENDER-loud) after verifying a property in a different modality (e.g., gustatory, CRANBERRIES-tart) compared to the same modality (e.g., LEAVES-rustling, Pecher et al., 2003). Similarly, modality switching costs lead to a modulation of the N400 effect in event-related potentials (ERPs; Collins et al., 2011; Hald et al., 2011). This effect of modality switching has also been shown to interact with the veracity of the sentence (Hald et al., 2011). The current ERP study further explores the role of modality match/mismatch on the processing of veracity as well as negation (sentences containing ânotâ). Our results indicate a modulation in the ERP based on modality and veracity, plus an interaction. The evidence supports the idea that modality specific simulations occur during language processing, and furthermore suggest that these simulations alter the processing of negation
Recommended from our members
Empowering Expression for Users with Aphasia through Constrained Creativity
Creative activities allow people to express themselves in rich, nuanced ways. However, being creative does not always come easily. For example, people with speech and language impairments, such as aphasia, face challenges in creative activities that involve language. In this paper, we explore the concept of constrained creativity as a way of addressing this challenge and enabling creative writing. We report an app, MakeWrite, that supports the constrained creation of digital texts through automated redaction. The app was co-designed with and for people with aphasia and was subsequently explored in a workshop with a group of people with aphasia. Participants were not only successful in crafting novel language, but, importantly, self-reported that the app was crucial in enabling them to do so. We refect on the potential of technology-supported constrained creativity as a means of empowering expression amongst users with diverse needs
Inverse Medea as a Novel Gene Drive System for Local Population Replacement: A Theoretical Analysis
One strategy to control mosquito-borne diseases, such as malaria and dengue fever, on a regional scale is to use gene drive systems to spread disease-refractory genes into wild mosquito populations. The development of a synthetic Medea element that has been shown to drive population replacement in laboratory Drosophila populations has provided encouragement for this strategy but has also been greeted with caution over the concern that transgenes may spread into countries without their consent. Here, we propose a novel gene drive system, inverse Medea, which is strong enough to bring about local population replacement but is unable to establish itself beyond an isolated release site. The system consists of 2 genetic componentsâa zygotic toxin and maternal antidoteâwhich render heterozygous offspring of wild-type mothers unviable. Through population genetic analysis, we show that inverse Medea will only spread when it represents a majority of the alleles in a population. The element is best located on an autosome and will spread to fixation provided any associated fitness costs are dominant and to very high frequency otherwise. We suggest molecular tools that could be used to build the inverse Medea system and discuss its utility for a confined release of transgenic mosquitoes
Photovoltaic stand-alone modular systems, phase 2
The final hardware and system qualification phase of a two part stand-alone photovoltaic (PV) system development is covered. The final design incorporated modular, power blocks capable of expanding incrementally from 320 watts to twenty kilowatts (PK). The basic power unit (PU) was nominally rated 1.28 kWp. The controls units, power collection buses and main lugs, electrical protection subsystems, power switching, and load management circuits are housed in a common control enclosure. Photo-voltaic modules are electrically connected in a horizontal daisy-chain method via Amp Solarlok plugs mating with compatible connectors installed on the back side of each photovoltaic module. A pair of channel rails accommodate the mounting of the modules into a frameless panel support structure. Foundations are of a unique planter (tub-like) configuration to allow for world-wide deployment without restriction as to types of soil. One battery string capable of supplying approximately 240 ampere hours nominal of carryover power is specified for each basic power unit. Load prioritization and shedding circuits are included to protect critical loads and selectively shed and defer lower priority or noncritical power demands. The baseline system, operating at approximately 2 1/2 PUs (3.2 kW pk.) was installed and deployed. Qualification was successfully complete in March 1983; since that time, the demonstration system has logged approximately 3000 hours of continuous operation under load without major incident
Challenges of implementing and embedding a programme to improve care for people with dementia on hospital wards
We recently took part in a national research project which evaluated an intervention to enhance person-centred care for people with dementia in hospital. The PIE (Person, Interactions, Environment) programme involves staff observing care on a ward, focusing on these three areas.
Findings from observations form the basis for introducing changes to ward practices. Implementing PIE led to improvements in practice, but proved challenging in the current context of the NHS. Sustaining the programme following the research required key features to be in place, in particular the presence of a âdriverâ to maintain momentum, the support of the ward manager to encourage ward staff to take part, and a degree of flexibility and persistence in the implementation of the programme.
Staff expressed satisfaction from taking part in PIE, which continues to be a tool which is used to improve care in this area of practice
- âŠ