Liquid jet pumped by rising gas bubbles

A two-phase mathematical model is proposed for calculating the induced turbulent vertical liquid flow. Bubbles provide a large buoyancy force and the associated drag on the liquid moves the liquid upward. The liquid pumped upward consists of the bubble wakes and the liquid brought into the jet region by turbulent entrainment. The expansion of the gas bubbles as they rise through the liquid is taken into account. The continuity and momentum equations are solved numerically for an axisymmetric air jet submerged in water. Water pumping rates are obtained as a function of air flow rate and depth of submergence. Comparisons are made with limited experimental information in the literature

Combined radiation, convection, and conduction for a system with a partially transmitting wall

The net radiation method is developed for systems having both opaque and partially transparent walls. Heat convection is present at the surfaces and heat conduction through the windows is taken into account. Specific equations are derived for a window between two parallel plates, where one plate is at an elevated temperature typical of what would be encountered in an electric furnace, and the other plate is being cooled. A two-band model is used with cutoff wavelengths typical of glass or quartz. Numerical results are obtained for the window temperature and the heat flow through the window. The effect on these quantities of various plate temperatures and emissivities is shown

A Bjorken sum rule for semileptonic Ωb\Omega_b decays to ground and excited charmed baryon states

We derive a Bjorken sum rule for semileptonic $\Omega_b$ decays to ground and low-lying negative-parity excited charmed baryon states, in the heavy quark limit. We discuss the restriction from this sum rule on form factors and compare it with some models.Comment: 10 pages, RevTex, no figure, Alberta Thy--26--9

There are no abnormal solutions of the Bethe−-Salpeter equation in the static model

The four-point Green's function of static QED, where a fermion and an antifermion are located at fixed space positions, is calculated in covariant gauges. The bound state spectrum does not display any abnormal state corresponding to excitations of the relative time. The equation that was established by Mugibayashi in this model and which has abnormal solutions does not coincide with the Bethe$-$Salpeter equation. Gauge transformation from the Coulomb gauge also confirms the absence of abnormal solutions in the Bethe$-$Salpeter equation.Comment: 11 pages, late

Inelastic behavior of structural components

A more accurate procedure was developed for the determination of the inelastic behavior of structural components. The actual stress-strain curve for the mathematical of the structure was utilized to generate the force-deformation relationships for the structural elements, rather than using simplified models such as elastic-plastic, bilinear and trilinear approximations. relationships were generated for beam elements with various types of cross sections. In the generational of these curves, stress or load reversals, kinematic hardening and hysteretic behavior were taken into account. Intersections between loading and unloading branches were determined through an iterative process. Using the inelastic properties obtained, the plastic static response of some simple structural systems composed of beam elements was computed. Results were compared with known solutions, indicating a considerable improvement over response predictions obtained by means of simplified approximations used in previous investigations

Nd:YAG laser welding of stainless steel 304 for photonics device packaging

Although pulsed Nd:YAG laser welding has been widely used in microelectronics and photonics packaging industry, a full understanding of various phenomena involved is still a matter of trials and speculations. In this research, an ultra compact pulsed Nd:YAG laser with wavelength of 1.064 µm has been used to produce a spot weld on stainless steel 304. The principal objective of this research is to examine the effects of laser welding parameters such as laser beam peak powers, pulse durations, incident angles, focus point positions and number of shots on the weld dimensions: penetration depth and bead width. The ratio of the penetration depth to the bead width is considered as one of the most critical parameters to determine the weld quality. It is found that the penetration depth and bead width increase when the laser beam peak power, pulse duration and number of shot increase. In contrast, the penetration depth decreases when the laser beam defocus position and incident angle increase. This is due to the reduction of the laser beam intensity causing by the widening of the laser spot size. These experimental results provide a reference on an optimal laser welding operations for a reliable photonics device packaging. The results obtained shows that stainless steel 304 is suitable to be used as a base material for photonics device packaging employing Nd:YAG laser welding technique

Antibody responses to nasopharyngeal carriage of Streptococcus pneumoniae in adults: A longitudinal household study

Background. Natural immunity to Streptococcus pneumoniae is thought to be induced by exposure to S. pneumoniae or cross-reactive antigens. No longitudinal studies of carriage of and immune responses to S. pneumoniae have been conducted using sophisticated immunological laboratory techniques.Methods. We enrolled 121 families with young children into this study. Nasopharyngeal (NP) swabs were collected monthly for 10 months from all family members and were cultured in a standard fashion. Cultured S. pneumoniae isolates were serotyped. At the beginning (month 0) and end (month 10) of the study, venous blood was collected from family members 118 years old. Serotype-specific antipolysaccharide immunoglobulin G (IgG) and functional antibody and antibodies to pneumolysin, pneumococcal surface protein A (PspA), and pneumococcal surface antigen A (PsaA) were measured in paired serum samples.Results. Levels of anticapsular IgG increased significantly after carriage of serotypes 9V, 14, 18C, 19F, and 23F by an individual or family member. For serotype 14, a higher level of anticapsular IgG at the beginning of the study was associated with reduced odds of carriage (P = .0006). There was a small (similar to 20%) but significant increase in titers of antibodies to PsaA and pneumolysin but no change in titers of antibody to PspA.Conclusions. Adults respond to NP carriage by mounting anticapsular and weak antiprotein antibody responses, and naturally induced anticapsular IgG can prevent carriage