Reprogrammable, Reprocessible, and Self-Healable Liquid Crystal Elastomer with Exchangeable Disulfide Bonds

A liquid crystal elastomer (LCE) can be regarded as an integration of mesogenic molecules into a polymer network. The LCE can generate large mechanical actuation when subjected to various external stimuli. Recently, it has been extensively explored to make artificial muscle and multifunctional devices. However, in the commonly adopted two-step crosslinking method for synthesizing monodomain LCEs, the LCE needs to be well-cross-linked in the first step before stretching, which increases the disorder of mesogenic molecules in the final state of the LCE and makes it very challenging to fabricate the LCE of complex shapes. In this article, we developed a new LCE with disulfide bonds, which can be reprogrammed from the polydomain state to the monodomain state either through heating or UV illumination, owing to the rearrangement of the polymer network induced by the metathesis reaction of disulfide bonds. In addition, the newly developed LCE can be easily reprocessed and self-healed by heating. Because of the excellent reprogrammability as well as reprocessability of the LCE, we further fabricated LCE-based active micropillar arrays through robust imprint lithography, which can be hardly achieved using the LCE prepared previously. Finally, we showed an excellent long-term durability of the newly developed LCE

Electrically Templated Dewetting of a UV-Curable Prepolymer Film for the Fabrication of a Concave Microlens Array with Well-Defined Curvature

This paper presents an economic method, based on electrically templated dewetting of a UV-curable prepolymer, for fabricating a concave microlens array (MLA) of high quality and high density. In our strategy, a voltage is applied to an electrode pair consisting of a conductive substrate coated with a UV-curable prepolymer film and a microhole-arrayed silicon template, sandwiching an air gap, to dewet the prepolymer film into a curved air–liquid interface. At or beyond a critical voltage, the curved prepolymer can be pulled quickly into contact with the protrusive underside of the silicon template. Contact of the prepolymer with the template can be detected by monitoring the leaky current in the polymer, followed by a UV curing of the prepolymer. Finally, by separating the mold from the solidified polymer, a concave MLA is obtained. The curvature of the MLA can be well-defined simply by changing the air gap between the mold and prepolymer film. Besides, the dewetting strategy results in a much smaller adhesion area between the mold and solidified polymer structures, which allows for easy separation of the mold from the MLA in a large-area operation

Electrically Modulated Microtransfer Molding for Fabrication of Micropillar Arrays with Spatially Varying Heights

The ability to generate a large area micropillar array with spatially varying heights allows for exploring numerous new interesting applications in biotechnology, surface engineering, microfluidics, and so forth. This Letter presents a clever and straightforward method, called electrically modulated microtransfer molding (EM3), for generating such unique microstructures from a silicon mold arrayed with microholes. The key to the process is an application of electrically tunable wettability caused by a spatially modulated voltage, which electrohydrodynamically drives a photocurable and dielectric prepolymer to fill the microholes to a depth depending on the voltage amplitude. Using EM3, micropillar arrays with stepwise or continuously varying heights are successfully fabricated, with the diameter scalable to 1.5 μm and with the maximum height being equal to the depth of the high-aspect-ratio (more than 10:1) microholes

Polydopamine-Coated Main-Chain Liquid Crystal Elastomer as Optically Driven Artificial Muscle

Optically driven active materials have received much attention because their deformation and motion can be controlled remotely, instantly, and precisely in a contactless way. In this study, we investigated an optically actuated elastomer with rapid response: polydopamine (PDA)-coated liquid crystal elastomer (LCE). Because of the photothermal effect of PDA coating and thermal responsiveness of LCE, the elastomer film contracted significantly with near-infrared (NIR) irradiation. With a fixed strain, light-induced actuating stress in the film could be as large as 1.5 MPa, significantly higher than the maximum stress generated by most mammalian skeletal muscle (0.35 MPa). The PDA-coated LCE films could also bend or roll up by surface scanning of an NIR laser. The response time of the film to light exposure could be as short as 1/10 of a second, comparable to or even faster than that of mammalian skeletal muscle. Using the PDA-coated LCE film, we designed and fabricated a prototype of robotic swimmer that was able to swim near the water–air interface by performing “swimming strokes” through reversible bending and unbending motions induced and controlled by an NIR laser. The results presented in this study clearly demonstrated that PDA-coated LCE is a promising optically driven artificial muscle, which may have great potential for applications of soft robotics and optomechanical coupling devices

Polydopamine-Coated Main-Chain Liquid Crystal Elastomer as Optically Driven Artificial Muscle

Optically driven active materials have received much attention because their deformation and motion can be controlled remotely, instantly, and precisely in a contactless way. In this study, we investigated an optically actuated elastomer with rapid response: polydopamine (PDA)-coated liquid crystal elastomer (LCE). Because of the photothermal effect of PDA coating and thermal responsiveness of LCE, the elastomer film contracted significantly with near-infrared (NIR) irradiation. With a fixed strain, light-induced actuating stress in the film could be as large as 1.5 MPa, significantly higher than the maximum stress generated by most mammalian skeletal muscle (0.35 MPa). The PDA-coated LCE films could also bend or roll up by surface scanning of an NIR laser. The response time of the film to light exposure could be as short as 1/10 of a second, comparable to or even faster than that of mammalian skeletal muscle. Using the PDA-coated LCE film, we designed and fabricated a prototype of robotic swimmer that was able to swim near the water–air interface by performing “swimming strokes” through reversible bending and unbending motions induced and controlled by an NIR laser. The results presented in this study clearly demonstrated that PDA-coated LCE is a promising optically driven artificial muscle, which may have great potential for applications of soft robotics and optomechanical coupling devices

Polydopamine-Coated Main-Chain Liquid Crystal Elastomer as Optically Driven Artificial Muscle

Optically driven active materials have received much attention because their deformation and motion can be controlled remotely, instantly, and precisely in a contactless way. In this study, we investigated an optically actuated elastomer with rapid response: polydopamine (PDA)-coated liquid crystal elastomer (LCE). Because of the photothermal effect of PDA coating and thermal responsiveness of LCE, the elastomer film contracted significantly with near-infrared (NIR) irradiation. With a fixed strain, light-induced actuating stress in the film could be as large as 1.5 MPa, significantly higher than the maximum stress generated by most mammalian skeletal muscle (0.35 MPa). The PDA-coated LCE films could also bend or roll up by surface scanning of an NIR laser. The response time of the film to light exposure could be as short as 1/10 of a second, comparable to or even faster than that of mammalian skeletal muscle. Using the PDA-coated LCE film, we designed and fabricated a prototype of robotic swimmer that was able to swim near the water–air interface by performing “swimming strokes” through reversible bending and unbending motions induced and controlled by an NIR laser. The results presented in this study clearly demonstrated that PDA-coated LCE is a promising optically driven artificial muscle, which may have great potential for applications of soft robotics and optomechanical coupling devices

Polydopamine-Coated Main-Chain Liquid Crystal Elastomer as Optically Driven Artificial Muscle

Optically driven active materials have received much attention because their deformation and motion can be controlled remotely, instantly, and precisely in a contactless way. In this study, we investigated an optically actuated elastomer with rapid response: polydopamine (PDA)-coated liquid crystal elastomer (LCE). Because of the photothermal effect of PDA coating and thermal responsiveness of LCE, the elastomer film contracted significantly with near-infrared (NIR) irradiation. With a fixed strain, light-induced actuating stress in the film could be as large as 1.5 MPa, significantly higher than the maximum stress generated by most mammalian skeletal muscle (0.35 MPa). The PDA-coated LCE films could also bend or roll up by surface scanning of an NIR laser. The response time of the film to light exposure could be as short as 1/10 of a second, comparable to or even faster than that of mammalian skeletal muscle. Using the PDA-coated LCE film, we designed and fabricated a prototype of robotic swimmer that was able to swim near the water–air interface by performing “swimming strokes” through reversible bending and unbending motions induced and controlled by an NIR laser. The results presented in this study clearly demonstrated that PDA-coated LCE is a promising optically driven artificial muscle, which may have great potential for applications of soft robotics and optomechanical coupling devices

Polydopamine-Coated Main-Chain Liquid Crystal Elastomer as Optically Driven Artificial Muscle

Optically driven active materials have received much attention because their deformation and motion can be controlled remotely, instantly, and precisely in a contactless way. In this study, we investigated an optically actuated elastomer with rapid response: polydopamine (PDA)-coated liquid crystal elastomer (LCE). Because of the photothermal effect of PDA coating and thermal responsiveness of LCE, the elastomer film contracted significantly with near-infrared (NIR) irradiation. With a fixed strain, light-induced actuating stress in the film could be as large as 1.5 MPa, significantly higher than the maximum stress generated by most mammalian skeletal muscle (0.35 MPa). The PDA-coated LCE films could also bend or roll up by surface scanning of an NIR laser. The response time of the film to light exposure could be as short as 1/10 of a second, comparable to or even faster than that of mammalian skeletal muscle. Using the PDA-coated LCE film, we designed and fabricated a prototype of robotic swimmer that was able to swim near the water–air interface by performing “swimming strokes” through reversible bending and unbending motions induced and controlled by an NIR laser. The results presented in this study clearly demonstrated that PDA-coated LCE is a promising optically driven artificial muscle, which may have great potential for applications of soft robotics and optomechanical coupling devices

Polydopamine-Coated Main-Chain Liquid Crystal Elastomer as Optically Driven Artificial Muscle

Optically driven active materials have received much attention because their deformation and motion can be controlled remotely, instantly, and precisely in a contactless way. In this study, we investigated an optically actuated elastomer with rapid response: polydopamine (PDA)-coated liquid crystal elastomer (LCE). Because of the photothermal effect of PDA coating and thermal responsiveness of LCE, the elastomer film contracted significantly with near-infrared (NIR) irradiation. With a fixed strain, light-induced actuating stress in the film could be as large as 1.5 MPa, significantly higher than the maximum stress generated by most mammalian skeletal muscle (0.35 MPa). The PDA-coated LCE films could also bend or roll up by surface scanning of an NIR laser. The response time of the film to light exposure could be as short as 1/10 of a second, comparable to or even faster than that of mammalian skeletal muscle. Using the PDA-coated LCE film, we designed and fabricated a prototype of robotic swimmer that was able to swim near the water–air interface by performing “swimming strokes” through reversible bending and unbending motions induced and controlled by an NIR laser. The results presented in this study clearly demonstrated that PDA-coated LCE is a promising optically driven artificial muscle, which may have great potential for applications of soft robotics and optomechanical coupling devices

Step-Controllable Electric-Field-Assisted Nanoimprint Lithography for Uneven Large-Area Substrates

Large-area nanostructures are widely used in various fields, but fabrication on large-area uneven substrates poses a significant challenge. This study demonstrates a step-controllable electric-field-assisted nanoimprint lithography (e-NIL) method that can achieve conformal contact with uneven substrates for high fidelity nanostructuring. Experiments are used to demonstrate the method where a substrate coated with liquid resist is brought into contact with a flexible template driven by the applied electric field. Theoretical analysis based on the elasticity theory and electro-hydrodynamic theory is carried out. Effective voltage range and the saturation voltage are also discussed. A step-controllable release of flexible template is proposed and demonstrated to ensure the continuous contact between the template and an uneven substrate. This prevents formation of air traps and allows large area conformal contact to be achieved. A combination of Vacuum-electric field assisted step-controllable e-NIL is implemented in the developed prototype. Finally, photonic crystal nanostructures are successfully fabricated on a 4 in., 158 μm bow gallium nitride light-emitting diode epitaxial wafer using the proposed method, which enhance the light extraction property