89 research outputs found

    New measurements of neutrino oscillation parameters and development of novel interaction uncertainties at current and future long-baseline experiments

    Get PDF
    T2K is a long-baseline neutrino oscillation experiment designed to perform precision measurements of the neutrino oscillation parameters sin2θ23, sin2θ13, and ∆m232, as well as constrain the CP-violating phase δCP. It performs these measurements by propagating a neutrino beam of average energy 0.6 GeV, produced at the J-PARC facility in Tokai, along a 295 km baseline to Super-Kamiokande (often referred to as Super-K or SK). The unoscillated beam is measured by a suite of near detectors 280 m downstream of the target, and the oscillated spectra are measured at Super-K. This thesis details constraints on the oscillation parameters measured by T2K from a joint fit to near and far-detector data using a Bayesian Markov chain Monte Carlo method. The results of two fits are reported, firstly fitting to T2K data only, and then applying an external constraint on sin2θ13 from reactor experiments. When fitting to T2K data only, the best-fit points and 68% credible intervals for the oscillation parameters are: sin2θ23 = 0.488+0.057−0.018, ∆m232 = 2.51 × 10−3 eV2 with a range of [2.43, 2.57] ∪ [−2.58, −2.51], sin2θ13 = 0.0235+0.0056−0.0031, δCP = −1.92+1.17−0.84. When applying an external reactor constraint to sin2θ13, the best-fit points and 68% credible intervals are: sin2θ23 = 0.531+0.028−0.044, ∆m232 = 2.51 × 10−3 eV2 with a range of [2.42, 2.58] ∪ [−2.56, −2.53], sin2θ13 = 0.0221 ± 0.0007, δCP = −1.84+0.83−0.74. CP-conserving values of both the CP-violating phase δCP and the Jarlskog invariant are excluded at the 90% significance level. Current oscillation parameter measurements are limited by statistical uncertainties. However, future measurements made at next-generation long-baseline experiments are anticipated to be limited by systematic uncertainties. It is therefore vital that work is carried out to better understand neutrino interaction cross sections, which currently represent a significant source of the total systematic uncertainty in oscillation parameter measurements. This thesis presents the development of two sets of novel interaction uncertainties for current and future experiments. First, parameters were developed at T2K to describe sizeable model differences seen in the low-energy transfer region. These parameters were further motivated by an alternative model study that demonstrated a significant bias in ∆m232, which was the largest contribution to the total systematic uncertainty for this parameter. This thesis demonstrates that the newly developed systematic uncertainties significantly reduce this bias and improve the flexibility and robustness of T2K’s interaction model. Finally, this thesis presents new interaction uncertainties that modify the nuclear ground state, developed especially for the Deep Underground Neutrino Experiment (DUNE), a next-generation long-baseline experiment. Benefiting from much higher statistics and improved detector resolution, it is anticipated that DUNE will have a strong sensitivity to nuclear effects, which are currently poorly understood. It is demonstrated that mis-modelling the nuclear ground state may lead to biases in oscillation parameter measurements

    The dependence of subhalo abundance matching on galaxy photometry and selection criteria

    Full text link
    Subhalo abundance matching (SHAM) is a popular technique for assigning galaxy mass or luminosity to haloes produced in N-body simulations. The method works by matching the cumulative number functions of the galaxy and halo properties, and is therefore sensitive both to the precise definitions of those properties and to the selection criteria used to define the samples. Further dependence follows when SHAM parameters are calibrated with galaxy clustering, which is known to depend strongly on the manner in which galaxies are selected. In this paper we introduce a new parametrisation for SHAM and derive the best-fit SHAM parameters as a function of various properties of the selection of the galaxy sample and of the photometric definition, including S\'ersic vs Petrosian magnitudes, stellar masses vs r-band magnitudes and optical (SDSS) vs HI (ALFALFA) selection. In each case we calculate the models' goodness-of-fit to measurements of the projected two-point galaxy correlation function. In the optically-selected samples we find strong evidence that the scatter in the galaxy-halo connection increases towards the faint end, and that AM performs better with luminosity than stellar mass. The SHAM parameters of optically- and HI-selected galaxies are mutually exclusive, with the latter suggesting the importance of properties beyond halo mass. We provide best-fit parameters for the SHAM galaxy-halo connection as a function of each of our input choices, extending the domain of validity of the model while reducing potential systematic error in its use.Comment: 19 pages and 15 figures. Matches the journal versio

    Supernova Pointing Capabilities of DUNE

    Full text link
    The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on 40^{40}Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage.Comment: 25 pages, 16 figure

    Neutrino interaction vertex reconstruction in DUNE with Pandora deep learning

    Get PDF
    The Pandora Software Development Kit and algorithm libraries perform reconstruction of neutrino interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at the Deep Underground Neutrino Experiment, which will operate four large-scale liquid argon time projection chambers at the far detector site in South Dakota, producing high-resolution images of charged particles emerging from neutrino interactions. While these high-resolution images provide excellent opportunities for physics, the complex topologies require sophisticated pattern recognition capabilities to interpret signals from the detectors as physically meaningful objects that form the inputs to physics analyses. A critical component is the identification of the neutrino interaction vertex. Subsequent reconstruction algorithms use this location to identify the individual primary particles and ensure they each result in a separate reconstructed particle. A new vertex-finding procedure described in this article integrates a U-ResNet neural network performing hit-level classification into the multi-algorithm approach used by Pandora to identify the neutrino interaction vertex. The machine learning solution is seamlessly integrated into a chain of pattern-recognition algorithms. The technique substantially outperforms the previous BDT-based solution, with a more than 20% increase in the efficiency of sub-1 cm vertex reconstruction across all neutrino flavours

    DUNE Phase II: scientific opportunities, detector concepts, technological solutions

    Get PDF
    The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the European Strategy for Particle Physics. While the construction of the DUNE Phase I is well underway, this White Paper focuses on DUNE Phase II planning. DUNE Phase-II consists of a third and fourth far detector (FD) module, an upgraded near detector complex, and an enhanced 2.1 MW beam. The fourth FD module is conceived as a "Module of Opportunity", aimed at expanding the physics opportunities, in addition to supporting the core DUNE science program, with more advanced technologies. This document highlights the increased science opportunities offered by the DUNE Phase II near and far detectors, including long-baseline neutrino oscillation physics, neutrino astrophysics, and physics beyond the standard model. It describes the DUNE Phase II near and far detector technologies and detector design concepts that are currently under consideration. A summary of key R&D goals and prototyping phases needed to realize the Phase II detector technical designs is also provided. DUNE's Phase II detectors, along with the increased beam power, will complete the full scope of DUNE, enabling a multi-decadal program of groundbreaking science with neutrinos

    Supernova pointing capabilities of DUNE

    Get PDF
    The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on 40Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called “brems flipping,” as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE’s burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage

    The track-length extension fitting algorithm for energy measurement of interacting particles in liquid argon TPCs and its performance with ProtoDUNE-SP data

    Get PDF
    This paper introduces a novel track-length extension fitting algorithm for measuring the kinetic energies of inelastically interacting particles in liquid argon time projection chambers (LArTPCs). The algorithm finds the most probable offset in track length for a track-like object by comparing the measured ionization density as a function of position with a theoretical prediction of the energy loss as a function of the energy, including models of electron recombination and detector response. The algorithm can be used to measure the energies of particles that interact before they stop, such as charged pions that are absorbed by argon nuclei. The algorithm's energy measurement resolutions and fractional biases are presented as functions of particle kinetic energy and number of track hits using samples of stopping secondary charged pions in data collected by the ProtoDUNE-SP detector, and also in a detailed simulation. Additional studies describe the impact of the dE/dx model on energy measurement performance. The method described in this paper to characterize the energy measurement performance can be repeated in any LArTPC experiment using stopping secondary charged pions

    The DUNE far detector vertical drift technology. Technical design report

    Get PDF
    DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals

    Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

    Get PDF
    The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements and provide comparisons to detector simulations

    First measurement of the total inelastic cross section of positively charged kaons on argon at energies between 5.0 and 7.5 GeV

    Get PDF
    ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/c beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380±26 mbarns for the 6 GeV/c setting and 379±35 mbarns for the 7 GeV/c setting
    corecore