Wound Dressing Based on Silver Nanoparticle Embedded Wool Keratin Electrospun Nanofibers Deposited on Cotton Fabric: Preparation, Characterization, Antimicrobial Activity, and Cytocompatibility

Wool keratin (WK) protein is attractive for wound dressing and biomedical applications due to its excellent biodegradability, cytocompatibility, and wound-healing properties. In this work, WK-based wound dressings were prepared by depositing WK/poly(vinyl alcohol) (PVA) and silver nanoparticle (Ag NP)-embedded WK/PVA composite nanofibrous membranes on cotton fabrics by electrospinning. Ag NPs were biosynthesized by reduction and stabilization with sodium alginate. The formed Ag NPs were characterized by ultraviolet–visible and Fourier transform infrared (FTIR) spectroscopy, and their size was determined by transmission electron microscopy and image analysis. The formed Ag NPs were spherical and had an average diameter of 9.95 nm. The produced Ag NP-embedded WK/PVA composite nanofiber-deposited cotton fabric surface was characterized by FTIR and dynamic contact angle measurements, and the nanofiber morphologies were characterized by scanning electron microscopy. The average diameter of the nanofibers formed by 0.1% Ag NP-embedded WK/PVA solution was 146.7 nm. The antibacterial activity of the surface of cotton fabrics coated with electrospun composite nanofibers was evaluated against the two most common wound-causing pathogens, Staphylococcus aureus and Pseudomonas aeruginosa. The cotton fabric coated with 0.1% Ag NP-embedded WK/PVA nanofibers showed very good antibacterial activity against both pathogens, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay results showed good cytocompatibility against L-929 mouse fibroblast cells. However, the increase in Ag NP content in the nanofibers to 0.2% negatively affected the cell viability due to the high release rate of Ag ions. The results achieved show that the developed wound dressing has good potential for wound healing applications

Table_1_Association of Coffee, Tea, and Caffeine Consumption With All-Cause Risk and Specific Mortality for Cardiovascular Disease Patients.DOCX

AimThe aim of the study was to examine the relationship between coffee, tea, caffeine consumption and risk of all-cause death and cardiovascular disease (CVD) death in CVD population.MethodsThis cohort study included 626 CVD participants aged ≥18 years old who derived from the National Health and Nutrition Examination Surveys (NHANES) database 2003–2006. The end time of follow-up was 2015, and with a median follow-up time of 113.5 (63, 133) months. CVD death was defined as a death caused by congestive heart failure (CHF), coronary heart disease (CHD), angina pectoris, heart attack or stroke. Cox model and competitive-risk model were used to explore the relationship of coffee, tea, caffeine, decaffeinated coffee/tea on the risk of the all-cause death and CVD death for CVD population, respectively. Additionally, we explored the effect of urinary caffeine and caffeine metabolites on all-cause death.ResultsAll patients were divided into survival group (n = 304), non-CVD death group (n = 223), and CVD death group (n = 99). The incidence of all-cause death and CVD death was ~51.44 and 15.81% in the study. After adjusting age, body mass index (BMI), cancer, estimated glomerular filtration rate (eGFR), energy, the history of CVD medications, carbohydrate and family income to poverty ratio (PIR), the results suggested coffee, caffeine, iced tea and hot tea consumption (≥4 cups per day) were associated with an increased risk of the all-cause death in CVD patients; while hot tea (1–3 cups per day), decaffeinated coffee/iced tea/hot tea could reduce the risk of the all-cause death. Likewise, coffee, caffeine, iced tea (≥4 cups per day), hot tea, decaffeinated iced tea/ hot tea (Always) could enhance the risk of the CVD death in CVD population. We also found that 1-methylxanthine showed a significant positive association on the risk of all-cause death in CVD population.ConclusionOur study indicated that higher consumption of coffee, tea and caffeine could increase the risk of all-cause and CVD death for CVD patients.</p

Enhancing Solar-Driven Water Purification by Multiscale Biomimetic Evaporators Featuring Lamellar MoS₂/GO Heterojunctions

Solar-powered steam generation holds a strong sustainability in facing the global water crisis, while the production efficiency and antifouling performance remain challenges. Inspired by river moss, a multiscale biomimetic evaporator is designed, where the key photothermal conversion film composed of lamellar MoS2/graphene oxides (GO) can significantly enhance the evaporation efficiency and solve the problem of fouling. First-level leaf-like MoS2/GO nanosheets, obtained by a modified hydrothermal synthesis with an assisted magnetic-field rotation stirring, are self-assembled into a second-level nanoporous film, which achieves an evaporation rate (ER) of 1.69 kg m–2 h–1 under 1 sun illumination and an excellent self-cleaning ability. The tertiary-bionic evaporator with a macroscopic crownlike shape further enhances the ER to 3.20 kg m–2 h–1, 189% above that of planar film, yielding 20.25 kg m2 of freshwater from seawater during a daytime exposure of 6 h. The exceptional outcomes originate from the macroscopic biomimetic design and the microscopic integration of heterojunction interfaces between the MoS2 and GO interlayers and the nanoporous surface. The biomimetic evaporator indicates a potential direction through surface/interface regulation of photothermal nanomaterials for water desalination

Enhancing Solar-Driven Water Purification by Multiscale Biomimetic Evaporators Featuring Lamellar MoS₂/GO Heterojunctions

Solar-powered steam generation holds a strong sustainability in facing the global water crisis, while the production efficiency and antifouling performance remain challenges. Inspired by river moss, a multiscale biomimetic evaporator is designed, where the key photothermal conversion film composed of lamellar MoS2/graphene oxides (GO) can significantly enhance the evaporation efficiency and solve the problem of fouling. First-level leaf-like MoS2/GO nanosheets, obtained by a modified hydrothermal synthesis with an assisted magnetic-field rotation stirring, are self-assembled into a second-level nanoporous film, which achieves an evaporation rate (ER) of 1.69 kg m–2 h–1 under 1 sun illumination and an excellent self-cleaning ability. The tertiary-bionic evaporator with a macroscopic crownlike shape further enhances the ER to 3.20 kg m–2 h–1, 189% above that of planar film, yielding 20.25 kg m2 of freshwater from seawater during a daytime exposure of 6 h. The exceptional outcomes originate from the macroscopic biomimetic design and the microscopic integration of heterojunction interfaces between the MoS2 and GO interlayers and the nanoporous surface. The biomimetic evaporator indicates a potential direction through surface/interface regulation of photothermal nanomaterials for water desalination

Table1_The Prognostic Model and Drug Sensitivity of LKB1-Mutant Lung Adenocarcinoma Based on Immune Landscape.DOCX

Background: Lung cancer is the most common cause of cancer-related deaths worldwide. LKB1-mutant lung adenocarcinoma (LUAD) is a unique subtype of this deadly cancer. LKB1 mutations cause functional changes in a variety of cell processes, including immune functions, that affect prognosis. To date, the potential role of immunity in the prognosis of LKB1-mutant LUAD is not well understood.Methods: We systematically analyzed immune-related genes in LUAD samples from The Cancer Genome Atlas (TCGA) database. ESTIMATE and CIBERSORT algorithms were used to explore the immune microenvironment. A prognostic risk model was constructed, and prognostic, immune function, drug sensitivity, and model specificity analyses were performed to identify the effectiveness of the model.Results: Our results showed that LKB1 mutations suppressed immune function in LUAD. A three-gene signature was constructed to stratify patients into two risk groups. The risk score was an independent predictor for overall survival (OS) in multivariate Cox regression analyses [hazard ratio (HR) > 1, p = 0.002]. Receiver operating characteristic (ROC) curve analyses confirmed that the risk score has better performance than clinicopathological characteristics. Functional analysis revealed that the immune status was different between the risk groups. ZM.447439 was an appropriate treatment for the high-risk group of patients. This risk model is only suitable for LKB1-mutant tumors; it performed poorly in LUAD patients with wild-type LKB1.Conclusion: Our findings indicate the potential role of immunity in LKB1-mutant LUAD, providing novel insights into prognosis and guiding effective immunotherapy.</p

Enhancing Solar-Driven Water Purification by Multiscale Biomimetic Evaporators Featuring Lamellar MoS₂/GO Heterojunctions

Solar-powered steam generation holds a strong sustainability in facing the global water crisis, while the production efficiency and antifouling performance remain challenges. Inspired by river moss, a multiscale biomimetic evaporator is designed, where the key photothermal conversion film composed of lamellar MoS2/graphene oxides (GO) can significantly enhance the evaporation efficiency and solve the problem of fouling. First-level leaf-like MoS2/GO nanosheets, obtained by a modified hydrothermal synthesis with an assisted magnetic-field rotation stirring, are self-assembled into a second-level nanoporous film, which achieves an evaporation rate (ER) of 1.69 kg m–2 h–1 under 1 sun illumination and an excellent self-cleaning ability. The tertiary-bionic evaporator with a macroscopic crownlike shape further enhances the ER to 3.20 kg m–2 h–1, 189% above that of planar film, yielding 20.25 kg m2 of freshwater from seawater during a daytime exposure of 6 h. The exceptional outcomes originate from the macroscopic biomimetic design and the microscopic integration of heterojunction interfaces between the MoS2 and GO interlayers and the nanoporous surface. The biomimetic evaporator indicates a potential direction through surface/interface regulation of photothermal nanomaterials for water desalination

DataSheet_1_Distinct gene mutation profiles among multiple and single primary lung adenocarcinoma.zip

With the development of technologies, multiple primary lung cancer (MPLC) has been detected more frequently. Although large-scale genomics studies have made significant progress, the aberrant gene mutation in MPLC is largely unclear. In this study, 141 and 44 lesions from single and multiple primary lung adenocarcinoma (SP- and MP-LUAD) were analyzed. DNA and RNA were extracted from formalin-fixed, paraffin-embedded tumor tissue and sequenced by using the next-generation sequencing-based YuanSu450TM gene panel. We systematically analyzed the clinical features and gene mutations of these lesions, and found that there were six genes differently mutated in MP-LUAD and SP-LUAD lesions, including RBM10, CDK4, ATRX, NTRK1, PREX2, SS18. Data from the cBioPortal database indicated that mutation of these genes was related to some clinical characteristics, such as TMB, tumor type, et al. Besides, heterogeneity analysis suggested that different lesions could be tracked back to monophyletic relationships. We compared the mutation landscape of MP-LUAD and SP-LUAD and identified six differentially mutated genes (RBM10, CDK4, ATRX, NTRK1, PREX2, SS18), and certain SNV loci in TP53 and EGFR which might play key roles in lineage decomposition in multifocal samples. These findings may provide insight into personalized prognosis prediction and new therapies for MP-LUAD patients.</p

Table_1_Distinct gene mutation profiles among multiple and single primary lung adenocarcinoma.docx

With the development of technologies, multiple primary lung cancer (MPLC) has been detected more frequently. Although large-scale genomics studies have made significant progress, the aberrant gene mutation in MPLC is largely unclear. In this study, 141 and 44 lesions from single and multiple primary lung adenocarcinoma (SP- and MP-LUAD) were analyzed. DNA and RNA were extracted from formalin-fixed, paraffin-embedded tumor tissue and sequenced by using the next-generation sequencing-based YuanSu450TM gene panel. We systematically analyzed the clinical features and gene mutations of these lesions, and found that there were six genes differently mutated in MP-LUAD and SP-LUAD lesions, including RBM10, CDK4, ATRX, NTRK1, PREX2, SS18. Data from the cBioPortal database indicated that mutation of these genes was related to some clinical characteristics, such as TMB, tumor type, et al. Besides, heterogeneity analysis suggested that different lesions could be tracked back to monophyletic relationships. We compared the mutation landscape of MP-LUAD and SP-LUAD and identified six differentially mutated genes (RBM10, CDK4, ATRX, NTRK1, PREX2, SS18), and certain SNV loci in TP53 and EGFR which might play key roles in lineage decomposition in multifocal samples. These findings may provide insight into personalized prognosis prediction and new therapies for MP-LUAD patients.</p

Global Anthropogenic Emissions of Full-Volatility Organic Compounds

Traditional global emission inventories classify primary organic emissions into nonvolatile organic carbon and volatile organic compounds (VOCs), excluding intermediate-volatility and semivolatile organic compounds (IVOCs and SVOCs, respectively), which are important precursors of secondary organic aerosols. This study establishes the first global anthropogenic full-volatility organic emission inventory with chemically speciated or volatility-binned emission factors. The emissions of extremely low/low-volatility organic compounds (xLVOCs), SVOCs, IVOCs, and VOCs in 2015 were 13.2, 10.1, 23.3, and 120.5 Mt, respectively. The full-volatility framework fills a gap of 18.5 Mt I/S/xLVOCs compared with the traditional framework. Volatile chemical products (VCPs), domestic combustion, and on-road transportation sources were dominant contributors to full-volatility emissions, accounting for 30, 30, and 12%, respectively. The VCP and on-road transportation sectors were the main contributors to IVOCs and VOCs. The key emitting regions included Africa, India, Southeast Asia, China, Europe, and the United States, among which China, Europe, and the United States emitted higher proportions of IVOCs and VOCs owing to the use of cleaner fuel in domestic combustion and more intense emissions from VCPs and on-road transportation activities. The findings contribute to a better understanding of the impact of organic emissions on global air pollution and climate change

Enhancing Solar-Driven Water Purification by Multiscale Biomimetic Evaporators Featuring Lamellar MoS₂/GO Heterojunctions

Solar-powered steam generation holds a strong sustainability in facing the global water crisis, while the production efficiency and antifouling performance remain challenges. Inspired by river moss, a multiscale biomimetic evaporator is designed, where the key photothermal conversion film composed of lamellar MoS2/graphene oxides (GO) can significantly enhance the evaporation efficiency and solve the problem of fouling. First-level leaf-like MoS2/GO nanosheets, obtained by a modified hydrothermal synthesis with an assisted magnetic-field rotation stirring, are self-assembled into a second-level nanoporous film, which achieves an evaporation rate (ER) of 1.69 kg m–2 h–1 under 1 sun illumination and an excellent self-cleaning ability. The tertiary-bionic evaporator with a macroscopic crownlike shape further enhances the ER to 3.20 kg m–2 h–1, 189% above that of planar film, yielding 20.25 kg m2 of freshwater from seawater during a daytime exposure of 6 h. The exceptional outcomes originate from the macroscopic biomimetic design and the microscopic integration of heterojunction interfaces between the MoS2 and GO interlayers and the nanoporous surface. The biomimetic evaporator indicates a potential direction through surface/interface regulation of photothermal nanomaterials for water desalination