Effect of Interfacial Atomic Mixing on the Thermal Conductivity of Multi-Layered Stacking Structure

Multi-layered stacking structures and atomic mixing interfaces were constructed. The effects of various factors on the thermal conductivity of different lattice structures were studied by non-equilibrium molecular dynamics simulations, including the number of atomic mixing layers, temperature, total length of the system, and period length. The results showed that the mixing of two and four layers of atoms can improve the thermal conductivities of the multi-layer structure with a small total length due to a phonon bridge mechanism. When the total length of the system is large, the thermal conductivity of the multi-layer structure with atomic mixing interfaces decreases significantly compared with that of the perfect interfaces. The interfacial atom mixing destroys the phonon coherent transport in the multi-layer structure and decreases the thermal conductivity to some extent. The thermal conductivity of the multi-layer structure with perfect interfaces is significantly affected by temperature, whereas the thermal conductivity of the multi-layer structures with atomic mixing is less sensitive to temperature

Single phase pressure drop in round cylindrical headers of parallel flow MCHXs

This paper presents the investigation of the pressure drop in headers and development of correlation for pressure loss coefficient for single phase flow through round cylindrical headers of parallel MCHXs. The working fluid was compressed air flowing through header with 1 - 20 m/s based on smallest cross section while the velocity through micro-channels was in the range 6 - 30 m/s. The experimental results indicate that the pressure loss coefficient of inlet header is a linear function of the ratio of velocities through micro-channel tube and header, except for the first two micro-channel tubes; the pressure loss coefficient of outlet header is a quadratic function of the ratio of velocities through micro-channel tube and header, and decreases as the velocities through upstream micro-channel tubes increase. Correlations for predicting pressure drop of inlet header and outlet header are developed and agreement for 98% of experimental data is within a ±15 Pa

SBVLC:Secure Barcode-based Visible Light Communication for Smartphones

2D barcodes have enjoyed a significant penetration rate in mobile applications. This is largely due to the extremely low barrier to adoption – almost every camera-enabled smartphone can scan 2D barcodes. As an alternative to NFC technology, 2D barcodes have been increasingly used for security-sensitive mobile applications including mobile payments and personal identification. However, the security of barcode-based communication in mobile applications has not been systematically studied. Due to the visual nature, 2D barcodes are subject to eavesdropping when they are displayed on the smartphone screens. On the other hand, the fundamental design principles of 2D barcodes make it difficult to add security features. In this paper, we propose SBVLC - a secure system for barcode-based visible light communication (VLC) between smartphones. We formally analyze the security of SBVLC based on geometric models and propose physical security enhancement mechanisms for barcode communication by manipulating screen view angles and leveraging user-induced motions. We then develop three secure data exchange schemes that encode information in barcode streams. These schemes are useful in many security-sensitive mobile applications including private information sharing, secure device pairing, and contactless payment. SBVLC is evaluated through extensive experiments on both Android and iOS smartphones

A new cost function for spatial image steganography based on 2D-SSA and WMF.

As an essential tool for secure communications, adaptive steganography aims to communicate secret information with the least security cost. Inspired by the Ranking Priority Profile (RPP), we propose a novel two-step cost function for adaptive steganography in this paper. The RPP mainly includes three rules, i.e. Complexity-First rule, the Clustering rule and the Spreading rule, to design a cost function. We use the two-dimensional Singular Spectrum Analysis (2D-SSA) and Weighted Median Filter (WMF) in designing the two-step cost function. The 2D-SSA is employed in selecting the key components and clustering the embedding positions, which follows the Complexity-First rule and the Clustering rule. Also, we deploy the Spreading rule to smooth the resulting image produced by 2D-SSA with WMF. Extensive experiments have shown the efficacy of the proposed method, which has improved performance over four benchmarking approaches against non-shared selection channel attack. It also provides comparable performance in selection-channel-aware scenarios, where the best results are observed when the relative payload is 0.3 bpp or larger. Besides, the proposed approach is much faster than other model-based methods

CASTER: A Computer-Vision-Assisted Wireless Channel Simulator for Gesture Recognition

In this paper, a computer-vision-assisted simulation method is proposed to address the issue of training dataset acquisition for wireless hand gesture recognition. In the existing literature, in order to classify gestures via the wireless channel estimation, massive training samples should be measured in a consistent environment, consuming significant efforts. In the proposed CASTER simulator, however, the training dataset can be simulated via existing videos. Particularly, a gesture is represented by a sequence of snapshots, and the channel impulse response of each snapshot is calculated via tracing the rays scattered off a primitive-based hand model. Moreover, CASTER simulator relies on the existing videos to extract the motion data of gestures. Thus, the massive measurements of wireless channel can be eliminated. The experiments demonstrate a 90.8% average classification accuracy of simulation-to-reality inference.Comment: 7 pages, 9 figure

Towards Transaction as a Service

This paper argues for decoupling transaction processing from existing two-layer cloud-native databases and making transaction processing as an independent service. By building a transaction as a service (TaaS) layer, the transaction processing can be independently scaled for high resource utilization and can be independently upgraded for development agility. Accordingly, we architect an execution-transaction-storage three-layer cloud-native database. By connecting to TaaS, 1) the AP engines can be empowered with ACID TP capability, 2) multiple standalone TP engine instances can be incorporated to support multi-master distributed TP for horizontal scalability, 3) multiple execution engines with different data models can be integrated to support multi-model transactions, and 4) high performance TP is achieved through extensive TaaS optimizations and consistent evolution. Cloud-native databases deserve better architecture: we believe that TaaS provides a path forward to better cloud-native databases

Investigation of Application of Suction Line Heat Exchanger in R290 Air Conditioner with Small Diameter Copper Tube

R290 is a potential refrigerant replacing R22 because of its zero Ozone Depletion Potential (ODP) and virtually zero Global Warming Potential (GWP). However, R290 is flammable and requires excellent containment to avoid leakage and reduce the risk of fire. The use of small diameter copper tube (5 mm or even smaller) is an effective way to reduce refrigerant charge and thus reduce the risk of fire in the event of a refrigerant leak. However, employing small diameter copper tube will increase pressure drop and consequently reduce system performance. A suction line heat exchanger which employs the low temperature refrigerant in suction line to cool down the refrigerant before expansion value is a potential solution to improve system performance because R290 has low discharge temperature compared with HFC refrigerants (e.g. R22, R410A). This paper presents an investigation of application of a suction line heat exchanger in an R290 air conditioner with small diameter copper tube. A theoretical analysis is proposed at first to investigate the effect of the suction line heat exchanger on capacity and system energy efficiency under variable evaporating and cooling temperatures. A prototype R290 air conditioner with and without a suction line heat exchanger is tested in order to explore the effect of a suction line heat exchanger on system performance and refrigerant charge in real working conditions. Finally, a refrigerant circuit solution for heat pump air conditioners is proposed. The results of theoretical analysis indicate that the capacity and system energy efficiency increase linearly with the heat exchange of the suctionline heat exchanger, and the suction line heat exchanger can improves capacity by up to 12% and system energy efficiency by up to 4% under both cooling and heating modes. This is because the suction line heat exchanger increases the sub-cooling but has less impact on compressor power due to good thermal properties of R290. Further, the evaporating and condensation temperature have insignificant impact on the performance of suction line heat exchanger. The experimental results show that the suction line heat exchanger improves the cooling capacity and system efficiency by 5.3% and 4.5%, respectively. These results agree well with that of the system analysis. The sub-cooling temperature increases 10.2o C and the discharge temperature increases 25.4o C. Further, the suction line heat exchanger reduces the refrigerant charge by as much as 6%. This is because suction line heat exchanger increases the discharge temperature, and thus the superheat region of the condenser increases resulting in less refrigerant in the condenser. Overall, the use of a suction line heat exchanger in a system with small diameter copper tube improves the performance of R290 and more importantly reduces the refrigerant charge

Environmental adaptation, growth performance and nutrient content of the clam Cyclina sinensis from different geographic locations

The clam Cyclina sinensis is an economically important marine species in China. However, overfishing, habitat destruction, and inbreeding have led to the destruction of genetic resources. In this study, five natural populations [Dandong (DD), Dongying (DY), Tianjin (TJ), Wenzhou (WZ), and Yancheng (YC)] from different geographical locations were relocated and cultured homogeneously to study their potential for translocation and environmental adaptation by observing growth performance and nutrient content. There were significant differences in the growth rates of shell length (SL), shell height (SH), and shell width (SW) among the five populations (P<0.05). The DD, TJ, and YC populations exhibited the highest SL and SH growth rates, whereas these were lowest in the WZ population. The survival rate was highest in the YC population and lowest in the WZ population, which was significantly lower than the other four populations (P<0.05). The DD population exhibited superior plumpness and glycogen content, and the overall glycogen content in male C. sinensis was higher compared with that in females (P<0.05). All populations displayed a high total amino acid content and the essential amino acid/Total Amino Acid (EAA/TAA) and Non-essential amino acid/Total Amino Acid (NEAA/TAA) ratios in the soft tissue of all five populations aligned with the FAO/WHO ideal protein evaluation standards. Despite the same aquaculture environment, however, the nutrient composition of C. sinensis sampled from different populations varied significantly (P<0.05).Therefore, ex situ conservation did not eliminate nutritional differences between the different populations of C. sinensis. These findings highlight the importance of considering environmental and ecological factors in the nutritional assessment and cultivation of shellfish. In addition, C. sinensis from sampling sites closer to the transplantation sites had higher survival rates and growth rates, and the gonadal development of all populations showed adaption to the local environment, resulting in synchronization of the reproductive period

EdgeCalib: Multi-Frame Weighted Edge Features for Automatic Targetless LiDAR-Camera Calibration

In multimodal perception systems, achieving precise extrinsic calibration between LiDAR and camera is of critical importance. Previous calibration methods often required specific targets or manual adjustments, making them both labor-intensive and costly. Online calibration methods based on features have been proposed, but these methods encounter challenges such as imprecise feature extraction, unreliable cross-modality associations, and high scene-specific requirements. To address this, we introduce an edge-based approach for automatic online calibration of LiDAR and cameras in real-world scenarios. The edge features, which are prevalent in various environments, are aligned in both images and point clouds to determine the extrinsic parameters. Specifically, stable and robust image edge features are extracted using a SAM-based method and the edge features extracted from the point cloud are weighted through a multi-frame weighting strategy for feature filtering. Finally, accurate extrinsic parameters are optimized based on edge correspondence constraints. We conducted evaluations on both the KITTI dataset and our dataset. The results show a state-of-the-art rotation accuracy of 0.086{\deg} and a translation accuracy of 0.977 cm, outperforming existing edge-based calibration methods in both precision and robustness

Consensus under Misaligned Orientations

This paper presents a consensus algorithm under misaligned orientations, which is defined as (i) misalignment to global coordinate frame of local coordinate frames, (ii) biases in control direction or sensing direction, or (iii) misaligned virtual global coordinate frames. After providing a mathematical formulation, we provide some sufficient conditions for consensus or for divergence. Besides the stability analysis, we also conduct some analysis for convergence characteristics in terms of locations of eigenvalues. Through a number of numerical simulations, we would attempt to understand the behaviors of misaligned consensus dynamics.Comment: 23 pages, 9 figure