Interpretation of soil carbon and nitrogen dynamics in agricultural and afforested soils

Includes bibliographical references (pages 1627-1628).Interpretation of soil organic C (SOC) dynamics depends heavily on analytical methods and management systems studied. Comparison of data from long-term corn (Zea mays)-plot soils in Eastern North America showed mean residence times (MRTs) of SOC determined by 14C dating were 176 times those measured with 13C abundance following a 30-yr replacement of C3 by C4 plants on the same soils. However, MRTs of the two methods were related (r 2 = 0.71). Field 13C MRTs of SOC were also related (R 2 = 0.55 to 0.85) to those measured by 13CO2 evolution and curve fitting during laboratory incubation. The strong relations, but different MRTs, were interpreted to mean that the three methods sampled different parts of a SOC continuum. The SOC of all parts of this continuum must be affected by the same controls on SOC dynamics for this to occur. Methods for site selection, plant biomass, soil sampling and analysis were tested on agricultural, afforested-agriculture, and native forest sites to determine the controls on SOC dynamics. Soil-C changes after afforestation were −0.07 to 0.55 Mg C ha−1 yr−1 on deciduous sites and −0.85 to 0.58 Mg C ha−1 yr−1 under conifers. Soil N changes under afforestation ranged from −0.1 to 0.025 Mg N ha−1 yr−1 Ecosystem N accumulation was −0.09 to 0.08 Mg N ha−1 yr−1 Soil C and N sequestration but not plant biomass were related to soil Ca, Mg, and K contents. Comparative, independent assays of long-term plots provides information for concept testing and the confidence necessary for decision-makers determining C-cycle policies

Gas chemical investigation of hafnium and zirconium complexes with hexafluoroacetylacetone using preseparated short-lived radioisotopes

Volatile metal complexes of the group 4 elements Zr and Hf with hexafluoroacetylacetonate (hfa) have been studied using short-lived radioisotopes of the metals. The new technique of physical preseparation has been employed where reaction products from heavy-ion induced fusion reactions are isolated in a physical recoil separator - the Berkeley Gas-filled Separator in our work - and made available for chemistry experiments. Formation and decomposition of M(hfa)4 (M=Zr, Hf) has been observed and the interaction strength with a fluorinated ethylene propylene (FEP) Teflon surface has been studied. From the results of isothermal chromatography experiments, an adsorption enthalpy of -ΔHa=(57±3)kJ/mol was deduced. In optimization experiments, the time for formation of the complex and its transport to a counting setup installed outside of the irradiation cave was minimized and values of roughly one minute have been reached. The half-life of 165Hf, for which conflicting values appear in the literature, was measured to be (73.9±0.8)s. Provided that samples suitable for α-spectroscopy can be prepared, the investigation of rutherfordium (Rf), the transactinide member of group 4, appears possible. In the future, based on the studies presented here, it appears possible to investigate short-lived single atoms produced with low rates ( e.g. , transactinide isotopes) in completely new chemical systems, e.g. , as metal complexes with organic ligands as used here or as organometallic compound

Search for the Production of Element 112 in the 48Ca + 238U Reaction

We have searched for the production of element 112 in the reaction of 231 MeV 48Ca with 238U. We have not observed any events with a "one event" upper limit cross section of 1.6 pb for EVR-fission events and 1.8 pb for EVR-alpha events.Comment: 6 pages, 3 figures, submitted to Phys. Rev.

New Isotope 263Hs

A new isotope of Hs was produced in the reaction 208Pb(56Fe, n)263Hs at the 88-Inch Cyclotron of the Lawrence Berkeley National Laboratory. Six genetically correlated nuclear decay chains have been observed and assigned to the new isotope 263Hs. The measured cross section was 21+13-8.4 pb at 276.4 MeV lab-frame center-of-target beam energy. 263Hs decays with a half-life of 0.74 ms by alpha-decay and the measured alpha-particle energies are 10.57 +- 0.06, 10.72 +- 0.06, and 10.89 +- 0.06 MeV. The experimental cross section is compared to a theoretical prediction based on the Fusion by Diffusion model [W. J. Swiatecki et al., Phys. Rev. C 71, 014602 (2005)]

The influence of projectile neutron number in the 208Pb(48Ti, n)255Rf and 208Pb(50Ti, n)257Rf reactions

Four isotopes of rutherfordium,254-257Rf, were produced by the 208Pb(48Ti, xn)256-xRf and 208Pb(50Ti, xn)258-xRf reactions (x = 1, 2) at the Lawrence Berkeley National Laboratory 88-Inch Cyclotron. Excitation functions were measured for the 1n and 2n exit channels. A maximum likelihood technique, which correctly accounts for the changing cross section at all energies subtended by the targets, was used to fit the 1n data to allow a more direct comparison between excitation functions obtained under different experimental conditions. The maximum 1n crosssections of the 208Pb(48Ti, n)255Rf and 208Pb(50Ti, n)257Rf reactions obtained from fits to the experimental data are 0.38 +/- 0.07 nb and 40 +/-5 nb, respectively. Excitation functions for the 2n exit channel were also measured, with maximum cross sections of nb for the 48Ti induced reaction, and 15.7 +/- 0.2 nb for the 50Ti induced reaction. The impact of the two neutron difference in the projectile on the 1n cross section is discussed. The results are compared to the Fusion by Diffusion model developed by Swiatecki, Wilczynska, and Wilczynski

Influence of projectile neutron number on cross section in cold fusion reactions

Elements 107-112 [1,2] have been discovered in reactions between {sup 208}Pb or {sup 209}Bi targets and projectiles ranging from {sup 54}Cr through {sup 70}Zn. In such reactions, the compound nucleus can be formed at excitation energies as low as {approx}12 MeV, thus this type of reaction has been referred to as 'cold fusion'. The study of cold fusion reactions is an indispensable approach to gaining a better understanding of heavy element formation and decay. A theoretical model that successfully predicts not only the magnitudes of cold fusion cross sections, but also the shapes of excitation functions and the cross section ratios between various reaction pairs was recently developed by Swiatecki, Siwek-Wilczynska, and Wilczynski [3,4]. This theoretical model, also referred to as Fusion by Diffusion, has been the guide in all of our cold fusion studies. One particularly interesting aspect of this model is the large predicted difference in cross sections between projectiles differing by two neutrons. The projectile pair where this difference is predicted to be largest is {sup 48}Ti and {sup 50}Ti. To test and extend this model, {sup 208}Pb({sup 48}Ti,n){sup 255}Rf and {sup 208}Pb({sup 50}Ti,n){sup 257}Rf excitation functions were recently measured at the Lawrence Berkeley National Laboratory's (LBNL) 88-Inch Cyclotron utilizing the Berkeley Gas-filled Separator (BGS). The {sup 50}Ti reaction was carried out with thin lead targets ({approx}100 {micro}g/cm{sup 2}), and the {sup 48}Ti reaction with both thin and thick targets ({approx}470 {micro}g/cm{sup 2}). In addition to this reaction pair, reactions with projectile pairs {sup 52}Cr and {sup 54}Cr [5], {sup 56}Fe and {sup 58}Fe [6], and {sup 62}Ni [7] and {sup 64}Ni [8] will be discussed and compared to the Fusion by Diffusion predictions. The model predictions show a very good agreement with the data

Particle-hole excited states in 133 Te

Excited states in neutron-rich ${}^{133}\mathrm{Te}$ have been identified with the Gamma sphere array by measuring three- and higher-fold prompt coincidence events following spontaneous fission of ${}^{252}\mathrm{Cf}.$ Four types of particle-hole bands built on the known 334.3 keV isomer in ${}^{133}\mathrm{Te}$ are identified. The yrast and near yrast particle-hole states observed up to 6.2 MeV in ${}^{133}\mathrm{Te}$ have characteristics quite similar to those in ${}^{134}\mathrm{Te}.$ These states are interpreted as a result of coupling a neutron \ensuremath{\nu}{h}_{11/2} hole to the ${}^{134}\mathrm{Te}$ core. The group of states observed above 5.214 MeV is the result of a neutron particle-hole excitation of the double magic core nucleus ${}^{132}\mathrm{Sn},$ and is a candidate for a tilted rotor band. Shell-model calculations considering ${}^{132}\mathrm{Sn}$ as a closed core have been performed and have provided guidance to the interpretation of the levels below 4.3 MeV. Very good agreement between theory and experiment is obtained for these states